OG 66 C-10 Custom - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pipeworx · 04-10-2008, 04:46 PM

Quote:

Originally Posted by smashingchuck

diamond back tire will make you whatever you want as long as you shell out the cash.

http://www.dbtires.com/catalog4.htm

Ouch.... talked to Diamondback, $297 a tire for redlines. Did not even bother to ask about a whitewall. They will not let you send your tire to them you have to buy there tire... too steep for me.

98L150 · 04-10-2008, 06:32 PM

truck is looking good. can't wait to see more of it.

jeff

SanitysBane · 04-10-2008, 09:13 PM

You might also what to look at http://www.cokertire.com/ or http://www.whitewallcandystore.com/

bedsled71 · 04-10-2008, 11:28 PM

any 20 inch white wall is going to be expensive.. 20 in blackwall tires are alot as it is..

bedsled71 · 04-10-2008, 11:29 PM

vouge makes them but they are about 550 a piece

Dinos63 · 04-11-2008, 11:20 PM

NICE WORK, LOOKS KILLER, I LIKE THE CRUSTY LOOK ALSO

smashingchuck · 04-12-2008, 07:08 AM

Quote:

Originally Posted by Pipeworx

Ouch.... talked to Diamondback, $297 a tire for redlines. Did not even bother to ask about a whitewall. They will not let you send your tire to them you have to buy there tire... too steep for me.

not bad. they quoted me that much for 17's.

DW67c10 · 04-12-2008, 06:26 PM

Can't wait till those wheels get some tires and the truck on the ground! Another guy on here has those wheels powder coated, but do not think his are on yet either. Have you considered painting the lip of the wheel white or red and just getting blackwall tires?

TXRookie · 04-13-2008, 06:22 PM

Matt, you keep keeping blowing me away with your skills! Can't wait to see it finished. I'm glad to see that you kept it.

SUB602 · 04-13-2008, 07:47 PM

Nice truck. I like the direction your going with it. Keep up the good work.

Pipeworx · 04-15-2008, 05:39 AM

Quote:

Originally Posted by DW67c10

Can't wait till those wheels get some tires and the truck on the ground! Another guy on here has those wheels powder coated, but do not think his are on yet either. Have you considered painting the lip of the wheel white or red and just getting blackwall tires?

I had thought about leaving a lip of the wheel polished but decided against it due to the uneven surface left behind next to an unpowdercoated section. I did order my tires and they should be in Monday or Tuesday. I got the BFG G-Force T/A KDW NT... or in short these.

http://www.discounttire.com/dtcs/fin...ance&tc=MTAHZH

I ordered the 255/35-20's for the front and 265/35/20's for the rear. As soon as they come in I will take some update pics as I have the suspension finished front and rear. I have also mounted the bed and have the framework in for the new bed floor.

ZBS 64 · 04-15-2008, 06:22 AM

Nice short wide

Pipeworx · 04-17-2008, 06:18 AM

More update pics. I got a day to work on the truck and the tires finally came in so here you go.

P.S. I put one in of my welding hood that my painter did... like clowns?

Pipeworx · 04-17-2008, 06:22 AM

Dinos63 · 04-17-2008, 06:38 AM

nice , very nice, the stance is killer , what are you going to run for a compressor?

TXRookie · 04-17-2008, 06:41 AM

You really pulled it off! Looks great.

Pipeworx · 04-17-2008, 06:49 AM

Quote:

Originally Posted by Dinos63

nice , very nice, the stance is killer , what are you going to run for a compressor?

Hey Dino whats up? I am going to run a York 210 off of my serpentine pulley system. I like to take a little different route so I want to go with a under hood air system. I am also not fond of the compressor hum and vibration with the electrical compressors. And I do not want to run more than one optima yellow top.

bedsled71 · 04-17-2008, 07:11 AM

looks awesome!

dieselarmy13 · 04-17-2008, 08:33 AM

It's about time we got to see that rear setup! That thing has me droolin!

DW67c10 · 04-17-2008, 02:49 PM

keeping the center caps polished?

GRIMSS · 04-17-2008, 03:13 PM

look'n damn nice.

Your bug out side the garage?

see ten · 04-17-2008, 03:26 PM

I see nothing about that truck that I don't like! That's going to be sweet when she comes together.

Dinos63 · 04-17-2008, 04:44 PM

that will be slick, i like photo with your kid

Pipeworx · 04-17-2008, 04:59 PM

Quote:

Originally Posted by DW67c10

keeping the center caps polished?

Yes but I will change them up some. I think that I will cut them down on the lathe and then cnc machine new center caps for them with my business logo in them. Here is a pic of my corporate logo.

Pipeworx · 04-17-2008, 05:01 PM

Quote:

Originally Posted by GRIMSS

look'n damn nice.

Your bug out side the garage?

No, that is a clients super beetle that is getting a SFI approved cage that I will be starting on today. The car will have a huge 500hp turbo motor and should go deep into the 8's in the 1/4 mile.

04-10-2008, 06:32 PM	#27
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: OG 66 C-10 Custom truck is looking good. can't wait to see more of it. jeff __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

04-10-2008, 09:13 PM	#28
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	Re: OG 66 C-10 Custom You might also what to look at http://www.cokertire.com/ or http://www.whitewallcandystore.com/ __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

04-10-2008, 11:28 PM	#29
bedsled71 Registered User Join Date: Feb 2007 Location: yuma arizona Posts: 448	Re: OG 66 C-10 Custom any 20 inch white wall is going to be expensive.. 20 in blackwall tires are alot as it is..

04-10-2008, 11:29 PM	#30
bedsled71 Registered User Join Date: Feb 2007 Location: yuma arizona Posts: 448	Re: OG 66 C-10 Custom vouge makes them but they are about 550 a piece

04-11-2008, 11:20 PM	#31
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: OG 66 C-10 Custom NICE WORK, LOOKS KILLER, I LIKE THE CRUSTY LOOK ALSO __________________ CHEVY ONLY... Nothin Else !

04-12-2008, 06:26 PM	#33
DW67c10 Registered User Join Date: Jul 2004 Location: Jackson, NJ Posts: 64	Re: OG 66 C-10 Custom Can't wait till those wheels get some tires and the truck on the ground! Another guy on here has those wheels powder coated, but do not think his are on yet either. Have you considered painting the lip of the wheel white or red and just getting blackwall tires? Last edited by DW67c10; 04-12-2008 at 06:27 PM.

04-13-2008, 06:22 PM	#34
TXRookie Registered User Join Date: Aug 2006 Location: Austin, TX Posts: 12	Re: OG 66 C-10 Custom Matt, you keep keeping blowing me away with your skills! Can't wait to see it finished. I'm glad to see that you kept it.

04-13-2008, 07:47 PM	#35
SUB602 Registered User Join Date: Feb 2008 Location: PHOENIX Posts: 23	Re: OG 66 C-10 Custom Nice truck. I like the direction your going with it. Keep up the good work. __________________ www.SlammersKustoms.com 98 GMC K1500 Suburban 75 K-5 SB350/TH350/NP205 74 K-5 Convert to 2wd and bag her Authorized dealer for the Dropmember, Built by PorterBuilt Street Rods

04-15-2008, 06:22 AM	#37
ZBS 64 Registered User Join Date: Jun 2007 Location: Port Orchard Washington Posts: 46	Re: OG 66 C-10 Custom Nice short wide

04-17-2008, 06:18 AM	#38
Pipeworx Registered User Join Date: Jan 2007 Location: Austin, Texas Posts: 43	Re: OG 66 C-10 Custom More update pics. I got a day to work on the truck and the tires finally came in so here you go. P.S. I put one in of my welding hood that my painter did... like clowns?

04-17-2008, 06:22 AM	#39
Pipeworx Registered User Join Date: Jan 2007 Location: Austin, Texas Posts: 43	Re: OG 66 C-10 Custom

04-17-2008, 06:38 AM	#40
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: OG 66 C-10 Custom nice , very nice, the stance is killer , what are you going to run for a compressor? __________________ CHEVY ONLY... Nothin Else !

04-17-2008, 06:41 AM	#41
TXRookie Registered User Join Date: Aug 2006 Location: Austin, TX Posts: 12	Re: OG 66 C-10 Custom You really pulled it off! Looks great.

04-17-2008, 07:11 AM	#43
bedsled71 Registered User Join Date: Feb 2007 Location: yuma arizona Posts: 448	Re: OG 66 C-10 Custom looks awesome!

04-17-2008, 08:33 AM	#44
dieselarmy13 Phone's ringin Dude. Join Date: Mar 2007 Location: Colorado Springs Posts: 1,426	Re: OG 66 C-10 Custom It's about time we got to see that rear setup! That thing has me droolin! __________________ I pitty the fool with only two headlights!! 2003 SILVERADO SS--THE NEW GIRL 1972 GMC--THE OLD GIRL



Register or Log In To remove these advertisements.

04-17-2008, 02:49 PM	#45
DW67c10 Registered User Join Date: Jul 2004 Location: Jackson, NJ Posts: 64	Re: OG 66 C-10 Custom keeping the center caps polished? Last edited by DW67c10; 04-17-2008 at 02:59 PM.

04-17-2008, 03:13 PM	#46
GRIMSS --------------- Join Date: Mar 2008 Location: Central Missouri Posts: 1,791	Re: OG 66 C-10 Custom look'n damn nice. Your bug out side the garage? __________________ 2001 GMC SIERRA 1956 Chevy Panel *Build Page* with a Scott's Hotrods IFS 1953 Chevy trucks *Project Dime Time* 1968 Camaro 1968 Volksrod "NOBACK" 55-59 one piece window *Video* 55-59 one piece window *template files* Jared

04-17-2008, 03:26 PM	#47
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: OG 66 C-10 Custom I see nothing about that truck that I don't like! That's going to be sweet when she comes together.

04-17-2008, 04:44 PM	#48
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: OG 66 C-10 Custom that will be slick, i like photo with your kid __________________ CHEVY ONLY... Nothin Else !

Register or Log In To remove these advertisements.