nelsons relaxed dropmember build - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Raguemoe · 11-24-2008, 12:29 AM

Can we get some more pics of the blue truck!

greens69 · 11-24-2008, 08:57 AM

Great work Nelson, Keep it up and let's see that truck on the road next year.....

Quote:

Originally Posted by Raguemoe

Can we get some more pics of the blue truck!

Here is a link to some pictures of the blue truck..

http://67-72chevytrucks.com/vboard/s...d.php?t=174282

my67chevytruck · 11-24-2008, 09:18 AM

looking good guys . Keep at it!

cstm68 · 11-25-2008, 12:07 AM

Quote:

Originally Posted by Raguemoe

Can we get some more pics of the blue truck!

x2

///Juan-SoCal · 12-03-2008, 10:16 PM

The truck is looking really good Nelson! ///RA Texas is hard at work cranking out some fine classic Chevy's.

gunkis84 · 12-04-2008, 01:56 AM

nice work

98L150 · 12-06-2008, 08:29 PM

Nelson been working and got the rear notches all installed. Plan to finish the rear tomorrow so he can finally set it on the ground and see how she looks.

98L150 · 12-07-2008, 07:11 PM

Well here she is outside on the ground Stillneed to remove the factory tranny crossmember and the factroy trailing arm crossmembers and this will lay out.

**lolife99** · 12-07-2008, 08:06 PM

Sweet!

*1sik52* · 12-07-2008, 08:23 PM

Looks Good! If its being built by a RA member then you know its going to look good!

Spray-Bomb · 12-07-2008, 11:43 PM

Sweet !!!

Now hurry up & get those X-members out so it will LAY !!!

pacificustoms · 12-08-2008, 05:40 PM

I've always liked the look of that truck! What was the reason for re-doing it all? It looked like it layed all the way out before? Did you guys get another frame to start over, because there was no notch or anything... What did it have under it before for suspension?

98L150 · 12-08-2008, 08:01 PM

the orginal frame had a 5-6" z (full width of the frame)and the rear was done with a lot of "different" ideas that did not work out to well that the previous owner did. when he found the new frame from another friend of ours it also had a clean mostly rust free cab which allowed the prefect oppourtunity to start clean and go with a cleaner newer set up.

jeff

Quote:

Originally Posted by pacificustoms

I've always liked the look of that truck! What was the reason for re-doing it all? It looked like it layed all the way out before? Did you guys get another frame to start over, because there was no notch or anything... What did it have under it before for suspension?

pacificustoms · 12-09-2008, 12:37 PM

Cool! Is he going for the same suede look he had before?

98L150 · 12-10-2008, 01:48 AM

no he is going do a full on build this time.

here is a cell phone pic of truck with stock tranny crossmember removed. now all he has to do is get the new rear crossmember removed.

Quote:

Originally Posted by pacificustoms

Cool! Is he going for the same suede look he had before?

98L150 · 12-15-2008, 12:29 AM

here are a few pics with more of the body panels starting to go on

**lolife99** · 12-15-2008, 12:36 AM

Looks good!
How's the fit of the new panels? Also what brand are they?

nuke1 · 12-15-2008, 12:56 AM

great height adjustment!

98L150 · 12-15-2008, 10:14 PM

the new panels are goodmark and the fit of them is ok. they will still require a lot of work though to get the fit properly.

Quote:

Originally Posted by lolife99

Looks good!
How's the fit of the new panels? Also what brand are they?

m6z · 12-21-2008, 09:14 PM

Looks great. What's are the tire sizes?

mycool72 · 12-21-2008, 11:57 PM

Nice build!

scuba_usa · 12-22-2008, 12:28 AM

were did u find the parts at i like the Porterbuilt dropmembers front and rear

**lolife99** · 12-22-2008, 01:21 AM

http://www.porterbuiltstreetrods.com/products.php

*Retro68* · 12-27-2008, 02:09 PM

Real sweet build. Nice suspension parts and it sure is slammmmmed!!

Bigbore · 12-29-2008, 11:04 AM

Hey guy's I was wondering how you reattached the hood, or do your wheel's come in contact with that part of your fender? Oh Yeah? And by the way great job! Your truck looks great!

11-24-2008, 12:29 AM	#26
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: nelsons relaxed dropmember build Can we get some more pics of the blue truck!

11-24-2008, 09:18 AM	#28
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: nelsons relaxed dropmember build looking good guys . Keep at it! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

12-03-2008, 10:16 PM	#30
///Juan-SoCal Registered User Join Date: Nov 2007 Location: Whittier, CA Posts: 36	Re: nelsons relaxed dropmember build The truck is looking really good Nelson! ///RA Texas is hard at work cranking out some fine classic Chevy's. __________________ ///Relaxed Atmosphere http://www.hubgarage.com/mygarage/RelaxedAtmosphere 1965 Chevrolet Carryall 1997 Chevrolet S-10

12-04-2008, 01:56 AM	#31
gunkis84 Registered User Join Date: Sep 2007 Location: Greer South Carolina Posts: 376	Re: nelsons relaxed dropmember build nice work __________________ -68 SWB fleet.. currently 20/18" 402bb 700r4 Changing Daily AKA PROJECT ROOKIE http://67-72chevytrucks.com/vboard/s...d.php?t=314716

12-06-2008, 08:29 PM	#32
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: nelsons relaxed dropmember build Nelson been working and got the rear notches all installed. Plan to finish the rear tomorrow so he can finally set it on the ground and see how she looks. Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

12-07-2008, 07:11 PM	#33
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: nelsons relaxed dropmember build Well here she is outside on the ground Stillneed to remove the factory tranny crossmember and the factroy trailing arm crossmembers and this will lay out. Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

12-07-2008, 08:06 PM	#34
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: nelsons relaxed dropmember build Sweet! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-07-2008, 08:23 PM	#35
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: nelsons relaxed dropmember build Looks Good! If its being built by a RA member then you know its going to look good!

12-07-2008, 11:43 PM	#36
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: nelsons relaxed dropmember build Sweet !!! Now hurry up & get those X-members out so it will LAY !!! __________________ Just not low enough... ----------------------------- Sinister Killer

12-08-2008, 05:40 PM	#37
pacificustoms Registered User Join Date: Apr 2006 Location: Napa, CA Posts: 43	Re: nelsons relaxed dropmember build I've always liked the look of that truck! What was the reason for re-doing it all? It looked like it layed all the way out before? Did you guys get another frame to start over, because there was no notch or anything... What did it have under it before for suspension? __________________ Robbie Azevedo Pacific Coast Customs

12-09-2008, 12:37 PM	#39
pacificustoms Registered User Join Date: Apr 2006 Location: Napa, CA Posts: 43	Re: nelsons relaxed dropmember build Cool! Is he going for the same suede look he had before? __________________ Robbie Azevedo Pacific Coast Customs

12-15-2008, 12:29 AM	#41
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: nelsons relaxed dropmember build here are a few pics with more of the body panels starting to go on Attached Images __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

12-15-2008, 12:36 AM	#42
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: nelsons relaxed dropmember build Looks good! How's the fit of the new panels? Also what brand are they? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-15-2008, 12:56 AM	#43
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: nelsons relaxed dropmember build great height adjustment! __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

12-21-2008, 09:14 PM	#45
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: nelsons relaxed dropmember build Looks great. What's are the tire sizes?



Register or Log In To remove these advertisements.

12-21-2008, 11:57 PM	#46
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: nelsons relaxed dropmember build Nice build!

12-22-2008, 12:28 AM	#47
scuba_usa Registered User Join Date: Dec 2007 Location: ks Posts: 4	Re: nelsons relaxed dropmember build were did u find the parts at i like the Porterbuilt dropmembers front and rear

12-22-2008, 01:21 AM	#48
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: nelsons relaxed dropmember build http://www.porterbuiltstreetrods.com/products.php __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-27-2008, 02:09 PM	#49
Retro68 Account Suspended Join Date: Jul 2006 Location: Mesa Arizona Posts: 294	Re: nelsons relaxed dropmember build Real sweet build. Nice suspension parts and it sure is slammmmmed!!

12-29-2008, 11:04 AM	#50
Bigbore just stuff and more stuff Join Date: Nov 2008 Location: Roseville, California Posts: 26	Re: nelsons relaxed dropmember build Hey guy's I was wondering how you reattached the hood, or do your wheel's come in contact with that part of your fender? Oh Yeah? And by the way great job! Your truck looks great! Last edited by Bigbore; 12-29-2008 at 11:05 AM.

Register or Log In To remove these advertisements.