lets see some engines! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jrsmith_2010 · 01-06-2009, 08:30 PM

heres my 350 in my 79, not pretty but it gets the job done

where can i get a dress up kit? like the complete works? do the valve covers leak?

flamingbig10 · 01-06-2009, 08:50 PM

350. bored 30 over Edelbrock performer intake, re-man quadrajet, rv cam, and headers

boatpuller · 01-06-2009, 08:53 PM

here's mine.300 h.p,all from summit or ebay.that's hydroboost in the corner

stepside454 · 01-06-2009, 09:34 PM

OK I didnt get to be the first big block to post, mines got a carb though , LOL

Rollinsqrbdy · 01-06-2009, 09:49 PM

Man i started the same thread a few months ago and was hopeing for a sticky and nope. Good luck. I'd show u all a pic of mine but i cant cause i aint got one yet. Soon though very soon. Bhuuuahhhh buhhhuahhh, and i'll take over the world buhaaaabuhaaa. Nice motors everybody

asphaltburner · 01-06-2009, 09:56 PM

Yo! Here's FRANKENTRUCK's:

Name: 110208 006 (Custom).jpg
Views: 4079
Size: 86.4 KB

350 with World 2.02/1.96 67cc heads (9.2:1 compression), Crane towing cam advanced 4 degrees, roller chain/sprocket and rockers, Weiand manifold, 2" Swirl-Torque carb spacer, 600 Holley with electric fuel pump, new HEI and MSD 6A, heavy shorty headers to 2.5" turbos and exhaust, and 1200-1500 stall spd. TH400 to the twin-stick NP205.
Runs pretty good.
Todd.

CoggedBelt75 · 01-06-2009, 10:09 PM

Here's mine...383 with a 671 and BDS electronic top hat

asphaltburner · 01-07-2009, 03:56 AM

Yo! Like,...full race! Huh?!
Bet THAT runs pretty good!
Todd.

Ds86C10 · 01-07-2009, 06:05 AM

Quote:

Originally Posted by boatpuller

here's mine.300 h.p,all from summit or ebay.that's hydroboost in the corner

i was just lookin at napa's site for brake parts and i kept seeing hydroboost and was wondering what that looked like... now i know lol

CoggedBelt75 · 01-07-2009, 08:18 AM

Quote:

Originally Posted by asphaltburner

Yo! Like,...full race! Huh?!
Bet THAT runs pretty good!
Todd.

Yeah, it's a little peppy but at my age I don't feel I need to prove anything to anyone so it hasn't seen any track time. I built this engine a year ago with with all street driving in mind. Just a daily driver my wife and I enjoy cruising around in. Joe

redrat · 01-07-2009, 09:42 AM

how about anouther big block !! 468 . we havent made it to the dyno yet so i cant give you any numbers but im extremly pleased with what it will do. Its a hand full when the secondary's open. it makes the that 6 leter in the Denali feal like a 4 cylinder...... LOL

87Bob · 01-07-2009, 09:43 AM

Quote:

Originally Posted by DirtyLarry

Some nice looking engines here.

How about a 2002 Vortec 8.1L in a ’78.

YouTube - 8.1L Start up

I can't say much about the trucks GM has been building. But you sure did an awesome job on the engine install! That looks stock sweet!

OLDIRON69 · 01-07-2009, 10:39 AM

Quote:

Originally Posted by redrat

how about anouther big block !! 468 . we havent made it to the dyno yet so i cant give you any numbers but im extremly pleased with what it will do. Its a hand full when the secondary's open. it makes the that 6 leter in the Denali feal like a 4 cylinder...... LOL

Sweet squarebody!! I'll be careful when I'm in Oklahoma next time. That would scare the tires off a stock truck.

87Lowrider · 01-09-2009, 12:04 AM

Here's mine.... 1976 454, all the trimmings...

In action:

http://www.youtube.com/watch?v=aSJNDRFIfsc

Mr79C10 · 01-10-2009, 07:01 AM

[IMG]

[/IMG]

Scootin 81 C20 · 01-10-2009, 10:54 PM

Dang, there's some nice engines in here. Lot'sa CHROME, I like 'em

Here's mine. GM Crate 350 with older Rochester Quadrajet and vintage intake. It's nothing special, but I'm working on it. It's only got about 33,000 miles on it. Well, here it is.

Slik69 · 01-12-2009, 09:16 PM

Quote:

Originally Posted by jrsmith_2010

heres my 350 in my 79, not pretty but it gets the job done

where can i get a dress up kit? like the complete works? do the valve covers leak?

I was told you get more air in like this. Not sure if true. A guy turned mine this way, but I switched it back because you also get a lof of trash in fliter as well.

CreditGod · 01-13-2009, 12:00 AM

Quote:

Originally Posted by stepside454

OK I didnt get to be the first big block to post, mines got a carb though , LOL

Nice wiring job under the hood some people need to know what a pair of cutting diks are for LOL but your wiring looks real clean good job

Slik69 · 01-13-2009, 12:06 AM

What's going on witht the trucks that have no heater cores. No heater apparently. I didn't know you could remove them.

1987 Shortwide · 01-13-2009, 06:06 AM

OK, don't shoot me.

A. the picture is horrible, but I just snapped a quick shot with my camera phone the other night.

B. It looks like hell under there right now, but that's merely because it's in the final stages of the frame-off and we were working to get it fired up and do some prelim. tuning. It will look much better under there soon.

CoggedBelt75 · 01-13-2009, 08:05 AM

If that's what you call looking horrible and like hell now, it is really going to be nice when you're done!! Good Job!! Joe

jchav62 · 01-13-2009, 11:07 AM

Here's the 350 in my '73. Runs strong... I can't say much about what's on the inside but judging from the upper end, it the way it performs, it's got some work in there. The intake valley is coated, the pushrods are fat, it's got some big studs, big rockers, guide plates and it sounds like it has a healthy cam. It needs the tall valve covers, short ones won't fit, if that means anything. The P.O. was into racing and had a few drag cars...he left this truck sitting for years, when I asked him about the engine, he just smirked and said it's been too long...he can't remember...

Not much to look at, but it pulls good!

Moostifer · 01-13-2009, 06:05 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=306432

some good ones here...

S10Fan · 01-18-2009, 04:23 PM

My S-10's 383..............

S10Fan · 01-18-2009, 04:26 PM

A bone stock 350/700R4 combo that will be cleaned up and dropped in the S-10.

01-06-2009, 08:30 PM	#26
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: lets see some engines! heres my 350 in my 79, not pretty but it gets the job done where can i get a dress up kit? like the complete works? do the valve covers leak? __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-06-2009, 08:50 PM	#27
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: lets see some engines! 350. bored 30 over Edelbrock performer intake, re-man quadrajet, rv cam, and headers __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 01-06-2009 at 09:00 PM.

01-06-2009, 08:53 PM	#28
boatpuller Registered User Join Date: Sep 2005 Location: Sun City West, Az Posts: 3,822	Re: lets see some engines! here's mine.300 h.p,all from summit or ebay.that's hydroboost in the corner Attached Images __________________ " Never look up a dead dogs butt."

01-06-2009, 09:34 PM	#29
stepside454 Registered User Join Date: Nov 2003 Location: st. louis area Posts: 1,551	Re: lets see some engines! OK I didnt get to be the first big block to post, mines got a carb though , LOL Attached Images __________________ 75 GMC C-15 short/step factory 454, lowered

01-06-2009, 09:49 PM	#30
Rollinsqrbdy Registered User Join Date: Aug 2008 Location: Dexter, N.M. Posts: 1,082	Re: lets see some engines! Man i started the same thread a few months ago and was hopeing for a sticky and nope. Good luck. I'd show u all a pic of mine but i cant cause i aint got one yet. Soon though very soon. Bhuuuahhhh buhhhuahhh, and i'll take over the world buhaaaabuhaaa. Nice motors everybody __________________ Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers New Mexico Member --- Member of the Square Body Club---

01-06-2009, 09:56 PM	#31
asphaltburner Registered User Join Date: Jul 2008 Location: Ault, Colorado Posts: 862	Re: lets see some engines! Yo! Here's FRANKENTRUCK's: 350 with World 2.02/1.96 67cc heads (9.2:1 compression), Crane towing cam advanced 4 degrees, roller chain/sprocket and rockers, Weiand manifold, 2" Swirl-Torque carb spacer, 600 Holley with electric fuel pump, new HEI and MSD 6A, heavy shorty headers to 2.5" turbos and exhaust, and 1200-1500 stall spd. TH400 to the twin-stick NP205. Runs pretty good. Todd. __________________ '78 3/4 ton 4x4 custom "Todd-built" FRANKENTRUCK!

01-06-2009, 10:09 PM	#32
CoggedBelt75 Registered User Join Date: Nov 2008 Location: Altus, Oklahoma Posts: 679	Re: lets see some engines! Here's mine...383 with a 671 and BDS electronic top hat Attached Images

01-07-2009, 03:56 AM	#33
asphaltburner Registered User Join Date: Jul 2008 Location: Ault, Colorado Posts: 862	Re: lets see some engines! Yo! Like,...full race! Huh?! Bet THAT runs pretty good! Todd. __________________ '78 3/4 ton 4x4 custom "Todd-built" FRANKENTRUCK!

01-07-2009, 09:42 AM	#36
redrat gearhead Join Date: Jun 2007 Location: Tulsa OK Posts: 144	Re: lets see some engines! how about anouther big block !! 468 . we havent made it to the dyno yet so i cant give you any numbers but im extremly pleased with what it will do. Its a hand full when the secondary's open. it makes the that 6 leter in the Denali feal like a 4 cylinder...... LOL Attached Images __________________ 2003 GMC Z71 Daily driver 1982 Chevy 2wd short bed, project, boxerdra@hotmail.com

01-10-2009, 07:01 AM	#40
Mr79C10 It Is What It Is,,,, Join Date: Aug 2006 Location: The Gun Shine StateFlorida* Posts: 1,765	Re: lets see some engines! [IMG][/IMG] __________________ 79 C10 Short Box ST8 6 bang'r Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT __--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............\|_(O)_ \|___(O) ] FAQ INDEX Thread The Kulture My Rat Den

01-10-2009, 10:54 PM	#41
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: lets see some engines! Dang, there's some nice engines in here. Lot'sa CHROME, I like 'em Here's mine. GM Crate 350 with older Rochester Quadrajet and vintage intake. It's nothing special, but I'm working on it. It's only got about 33,000 miles on it. Well, here it is. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

01-13-2009, 12:06 AM	#44
Slik69 Registered User Join Date: Sep 2008 Location: Ogden Utah Posts: 286	Re: lets see some engines! What's going on witht the trucks that have no heater cores. No heater apparently. I didn't know you could remove them.

01-13-2009, 06:06 AM	#45
1987 Shortwide Senior Member Join Date: Feb 2003 Location: Wichita KS Posts: 610	Re: lets see some engines! OK, don't shoot me. A. the picture is horrible, but I just snapped a quick shot with my camera phone the other night. B. It looks like hell under there right now, but that's merely because it's in the final stages of the frame-off and we were working to get it fired up and do some prelim. tuning. It will look much better under there soon. __________________ ~Steve~ Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean.

01-13-2009, 08:05 AM	#46
CoggedBelt75 Registered User Join Date: Nov 2008 Location: Altus, Oklahoma Posts: 679	Re: lets see some engines! If that's what you call looking horrible and like hell now, it is really going to be nice when you're done!! Good Job!! Joe

01-13-2009, 11:07 AM	#47
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: lets see some engines! Here's the 350 in my '73. Runs strong... I can't say much about what's on the inside but judging from the upper end, it the way it performs, it's got some work in there. The intake valley is coated, the pushrods are fat, it's got some big studs, big rockers, guide plates and it sounds like it has a healthy cam. It needs the tall valve covers, short ones won't fit, if that means anything. The P.O. was into racing and had a few drag cars...he left this truck sitting for years, when I asked him about the engine, he just smirked and said it's been too long...he can't remember... Not much to look at, but it pulls good! Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4



Register or Log In To remove these advertisements.

01-13-2009, 06:05 PM	#48
Moostifer a fool with no money Join Date: May 2005 Location: Overton, Tx Posts: 532	Re: lets see some engines! http://67-72chevytrucks.com/vboard/s...d.php?t=306432 some good ones here... __________________ Basicly stock 83 SWB with a few Bolt-ons before, during and still during http://photobucket.com/albums/y251/moostifer/truck/ http://photobucket.com/albums/y251/moostifer/motor/

01-18-2009, 04:23 PM	#49
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: lets see some engines! My S-10's 383.............. Attached Images __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

01-18-2009, 04:26 PM	#50
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: lets see some engines! A bone stock 350/700R4 combo that will be cleaned up and dropped in the S-10. Attached Images __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

Register or Log In To remove these advertisements.