Parting 83 K10 700R4 NP208 MM hubs* - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 03-25-2009, 02:52 PM

Lots still available, selling cheap

Blue85 · 03-25-2009, 03:42 PM

Is the dash bezel for sale?

Rogue_Sentinel · 03-25-2009, 05:35 PM

will you just sell the oil and water gauge ? ship to 27030

**ScottH** · 03-25-2009, 09:21 PM

Bezel & gauges still available. I'll get pics tomorrow after work.

Would rather sell the gauges as a unit.

DANL · 03-25-2009, 09:55 PM

Hey Scott, don't forget I need the front sway bar, upper spring plates and all of the brackets.

...Dan

Blue85 · 03-25-2009, 09:58 PM

How much do you want for the bezel? Has it been cut?

Rogue_Sentinel · 03-25-2009, 10:31 PM

do you a battery tray ? pics ? if so, how much to ship to 27030

OLDCHEV4X4 · 03-26-2009, 07:03 AM

Are the rubber cab mounts any good?

**ScottH** · 03-26-2009, 10:31 AM

Dan, PM sent

Blue85, not cut, nice shape, how about $25 + ride

Rogue, I have a battery tray but bottom bolt is gone. I can get u a pic over the weekend. $15 + ride

Oldchevy4x4, right now the cab is staying on the chassis, trying to sell it as a rolling unit. If that changes I'll check them and let u know.

Blue85 · 03-27-2009, 12:34 AM

just to verify, that dash bezel should fit an 80?

**ScottH** · 03-27-2009, 09:20 AM

blue85, I believe it would fit your 80 but u may want to post a question on the message board just to verify.

Scott

Blue85 · 03-27-2009, 10:53 AM

ok i'll check it out and get back to you asap.

Blue85 · 03-27-2009, 08:07 PM

Doesnt look like it will work, I pass

73chevyman · 03-29-2009, 06:22 PM

tailgate band with clips how much i live around the corner threw the woods and across the bay lol maryland here shipping might be easier i live in maryland 20657

73chevyman · 03-29-2009, 06:24 PM

ohh and the tail lights too they look better then mine lol

**ScottH** · 03-30-2009, 10:32 PM

73chevyman, I'd like to keep the band with the tailgate for now but will let u know if that changes. The tailgate is in real nice shape, straight, only want $75 for it. I can pull the taillights if u want them, $25 shipped.

86ltrain · 04-08-2009, 10:26 AM

I would love to have the drivers door, but I don't suppose you want to ship that to MN? Do you still have the grille? If so what would you want for just the grille & shipping to 56636?

Thanks
Leo

**ScottH** · 04-08-2009, 10:53 AM

Leo, the drivers door is not in good shape, needs a skin, and would rather not ship large parts. As for the grille, did u want just the grille or the grille and the headlight bezels?

86ltrain · 04-09-2009, 10:46 AM

I'm looking for just the grille...

86ltrain · 04-09-2009, 01:23 PM

One more thing if available...the chrome strip that runs from headlight to headlight above the grille. Its about 3/4" tall, I believe it snaps into place. If you could quote that as well i'd appreciate it...
Leo

86ltrain · 04-13-2009, 09:29 PM

Are these parts still available???

**ScottH** · 04-13-2009, 11:18 PM

Sorry, been really busy lately and haven't had time to pull your parts. Yes they are still available, I should get a chance to pull them this weekend. If u would rather not wait that long I understand. Sorry for the delay.

86ltrain · 04-14-2009, 09:57 AM

Yeah, thats no problem...I can wait. What are you asking for the grille & the chrome trim piece above it?

**ScottH** · 04-14-2009, 10:08 AM

How about $50 plus the ride

86ltrain · 04-14-2009, 12:20 PM

Yeah, that'll work...that does include the chrome piece (about 4-5 ft long)right above the grille? Do you accept Paypal?

Thanks
Leo

03-25-2009, 02:52 PM	#26
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting 83 K10 700R4 NP208 MM hubs* Lots still available, selling cheap __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-25-2009, 03:42 PM	#27
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Parting 83 K10 700R4 NP208 MM hubs* Is the dash bezel for sale? __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

03-25-2009, 05:35 PM	#28
Rogue_Sentinel Registered User Join Date: Mar 2009 Location: nc, mount airy Posts: 376	Re: Parting 83 K10 700R4 NP208 MM hubs* will you just sell the oil and water gauge ? ship to 27030

03-25-2009, 09:21 PM	#29
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting 83 K10 700R4 NP208 MM hubs* Bezel & gauges still available. I'll get pics tomorrow after work. Would rather sell the gauges as a unit. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-25-2009, 09:55 PM	#30
DANL Senior Member Join Date: Mar 2002 Location: Bartlett, TN Posts: 348	Re: Parting 83 K10 700R4 NP208 MM hubs* Hey Scott, don't forget I need the front sway bar, upper spring plates and all of the brackets. ...Dan

03-25-2009, 09:58 PM	#31
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Parting 83 K10 700R4 NP208 MM hubs* How much do you want for the bezel? Has it been cut? __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

03-25-2009, 10:31 PM	#32
Rogue_Sentinel Registered User Join Date: Mar 2009 Location: nc, mount airy Posts: 376	Re: Parting 83 K10 700R4 NP208 MM hubs* do you a battery tray ? pics ? if so, how much to ship to 27030

03-26-2009, 07:03 AM	#33
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: Parting 83 K10 700R4 NP208 MM hubs* Are the rubber cab mounts any good? __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania

03-26-2009, 10:31 AM	#34
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting 83 K10 700R4 NP208 MM hubs* Dan, PM sent Blue85, not cut, nice shape, how about $25 + ride Rogue, I have a battery tray but bottom bolt is gone. I can get u a pic over the weekend. $15 + ride Oldchevy4x4, right now the cab is staying on the chassis, trying to sell it as a rolling unit. If that changes I'll check them and let u know. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-27-2009, 12:34 AM	#35
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Parting 83 K10 700R4 NP208 MM hubs* just to verify, that dash bezel should fit an 80? __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

03-27-2009, 09:20 AM	#36
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting 83 K10 700R4 NP208 MM hubs* blue85, I believe it would fit your 80 but u may want to post a question on the message board just to verify. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

03-27-2009, 10:53 AM	#37
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Parting 83 K10 700R4 NP208 MM hubs* ok i'll check it out and get back to you asap. __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

03-27-2009, 08:07 PM	#38
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: Parting 83 K10 700R4 NP208 MM hubs* Doesnt look like it will work, I pass __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

03-29-2009, 06:22 PM	#39
73chevyman Registered User Join Date: Nov 2008 Location: Lusby, MD Posts: 563	Re: Parting 83 K10 700R4 NP208 MM hubs* tailgate band with clips how much i live around the corner threw the woods and across the bay lol maryland here shipping might be easier i live in maryland 20657 __________________ http://67-72chevytrucks.com/vboard/group.php?groupid=37 73 C10 Fleetside If it ain't a Chevy it's foreign http://hotridesmag.com/

03-29-2009, 06:24 PM	#40
73chevyman Registered User Join Date: Nov 2008 Location: Lusby, MD Posts: 563	Re: Parting 83 K10 700R4 NP208 MM hubs* ohh and the tail lights too they look better then mine lol __________________ http://67-72chevytrucks.com/vboard/group.php?groupid=37 73 C10 Fleetside If it ain't a Chevy it's foreign http://hotridesmag.com/



Register or Log In To remove these advertisements.

03-30-2009, 10:32 PM	#41
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting 83 K10 700R4 NP208 MM hubs* 73chevyman, I'd like to keep the band with the tailgate for now but will let u know if that changes. The tailgate is in real nice shape, straight, only want $75 for it. I can pull the taillights if u want them, $25 shipped. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-08-2009, 10:26 AM	#42
86ltrain Registered User Join Date: Jul 2004 Location: deer, MN Posts: 43	Re: Parting 83 K10 700R4 NP208 MM hubs* I would love to have the drivers door, but I don't suppose you want to ship that to MN? Do you still have the grille? If so what would you want for just the grille & shipping to 56636? Thanks Leo __________________ 1986 K10, Prof. built 700R4, 357 cu/in, 9.4:1, Vortec heads, RPM intake, Performer cam, 600 Holley, Perf. curved HEI w/ Flamethrower coil, headers w/ 2-1/4 duals,

04-08-2009, 10:53 AM	#43
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting 83 K10 700R4 NP208 MM hubs* Leo, the drivers door is not in good shape, needs a skin, and would rather not ship large parts. As for the grille, did u want just the grille or the grille and the headlight bezels? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-09-2009, 10:46 AM	#44
86ltrain Registered User Join Date: Jul 2004 Location: deer, MN Posts: 43	Re: Parting 83 K10 700R4 NP208 MM hubs* I'm looking for just the grille... __________________ 1986 K10, Prof. built 700R4, 357 cu/in, 9.4:1, Vortec heads, RPM intake, Performer cam, 600 Holley, Perf. curved HEI w/ Flamethrower coil, headers w/ 2-1/4 duals,

04-09-2009, 01:23 PM	#45
86ltrain Registered User Join Date: Jul 2004 Location: deer, MN Posts: 43	Re: Parting 83 K10 700R4 NP208 MM hubs* One more thing if available...the chrome strip that runs from headlight to headlight above the grille. Its about 3/4" tall, I believe it snaps into place. If you could quote that as well i'd appreciate it... Leo __________________ 1986 K10, Prof. built 700R4, 357 cu/in, 9.4:1, Vortec heads, RPM intake, Performer cam, 600 Holley, Perf. curved HEI w/ Flamethrower coil, headers w/ 2-1/4 duals,

04-13-2009, 09:29 PM	#46
86ltrain Registered User Join Date: Jul 2004 Location: deer, MN Posts: 43	Re: Parting 83 K10 700R4 NP208 MM hubs* Are these parts still available??? __________________ 1986 K10, Prof. built 700R4, 357 cu/in, 9.4:1, Vortec heads, RPM intake, Performer cam, 600 Holley, Perf. curved HEI w/ Flamethrower coil, headers w/ 2-1/4 duals,

04-13-2009, 11:18 PM	#47
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting 83 K10 700R4 NP208 MM hubs* Sorry, been really busy lately and haven't had time to pull your parts. Yes they are still available, I should get a chance to pull them this weekend. If u would rather not wait that long I understand. Sorry for the delay. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-14-2009, 09:57 AM	#48
86ltrain Registered User Join Date: Jul 2004 Location: deer, MN Posts: 43	Re: Parting 83 K10 700R4 NP208 MM hubs* Yeah, thats no problem...I can wait. What are you asking for the grille & the chrome trim piece above it? __________________ 1986 K10, Prof. built 700R4, 357 cu/in, 9.4:1, Vortec heads, RPM intake, Performer cam, 600 Holley, Perf. curved HEI w/ Flamethrower coil, headers w/ 2-1/4 duals,

04-14-2009, 10:08 AM	#49
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting 83 K10 700R4 NP208 MM hubs* How about $50 plus the ride __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-14-2009, 12:20 PM	#50
86ltrain Registered User Join Date: Jul 2004 Location: deer, MN Posts: 43	Re: Parting 83 K10 700R4 NP208 MM hubs* Yeah, that'll work...that does include the chrome piece (about 4-5 ft long)right above the grille? Do you accept Paypal? Thanks Leo __________________ 1986 K10, Prof. built 700R4, 357 cu/in, 9.4:1, Vortec heads, RPM intake, Performer cam, 600 Holley, Perf. curved HEI w/ Flamethrower coil, headers w/ 2-1/4 duals,

Register or Log In To remove these advertisements.