Ram Horns - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 02-24-2009, 07:43 PM

Those are nice but they don't have the turn back on the driver's side one like the orignal ones to clear the mount.

Twisted78SS · 02-24-2009, 07:44 PM

Yeah, I see that now that you mention it. Never considered them so I guess I didn't look that close. Good catch!

**leddzepp** · 02-24-2009, 07:50 PM

Quote:

Originally Posted by cparman

leddzep. there is alot to be said for no exhaust leak. I have been both ways with good results, but i think I am over the header thing. Someone posted recently with part numbers for aftermarket ram horns manifolds made by the Dorman company. I have experience with their products, and They make a set of 2 1/2 in rams horn manifolds that should flow well, and not be a PIA

I run manifolds on my C-10, and love them. I have headers on my big block C-20 (came with them) and do not really care for them. They are full length, and fit great, no clearance issues. They seem to blow out exhaust gaskets all the time. I think I am going to try a set of copper ones next time. At some point down the road, I am going to put the manifolds back on.

Andy4639 · 02-24-2009, 07:58 PM

They would make a engine compartment look nice though. I bet a set of the orignal ones would look as good as those coated with the chrome powder. I will work on the one I have this weekend and see how it goes.

cparman · 02-24-2009, 08:04 PM

had a set of hooker super comps on my Chevelle. BEFORE installing them I had the high temp coated black. Useda set of felpro header gaskets, and actually read the instructions. put them on ran car 20 or so, let cool and tightened the bolts again. after about 50 miles or so I tightened them one more time and never had a proble in the 4000 miles I drove this car

Andy4639 · 02-24-2009, 08:09 PM

Funny we are talking about this on here and my bud at work sends me this on e-mail to check out. I wonder if I could get him to make me a set.

http://www.moyermade.com/chevyV8.html

Andy4639 · 02-25-2009, 08:11 PM

ttt

02-24-2009, 07:43 PM	#26
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Ram Horns Those are nice but they don't have the turn back on the driver's side one like the orignal ones to clear the mount. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-24-2009, 07:44 PM	#27
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Ram Horns Yeah, I see that now that you mention it. Never considered them so I guess I didn't look that close. Good catch! __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

02-24-2009, 07:58 PM	#29
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Ram Horns They would make a engine compartment look nice though. I bet a set of the orignal ones would look as good as those coated with the chrome powder. I will work on the one I have this weekend and see how it goes. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-24-2009, 08:04 PM	#30
cparman sharp as a marble Join Date: Jan 2007 Location: atlantic beach,florida Posts: 1,082	Re: Ram Horns had a set of hooker super comps on my Chevelle. BEFORE installing them I had the high temp coated black. Useda set of felpro header gaskets, and actually read the instructions. put them on ran car 20 or so, let cool and tightened the bolts again. after about 50 miles or so I tightened them one more time and never had a proble in the 4000 miles I drove this car Attached Images Last edited by cparman; 02-24-2009 at 08:04 PM.

02-24-2009, 08:09 PM	#31
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Ram Horns Funny we are talking about this on here and my bud at work sends me this on e-mail to check out. I wonder if I could get him to make me a set. http://www.moyermade.com/chevyV8.html __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-25-2009, 08:11 PM	#32
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Ram Horns ttt __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.