Parting 1971 Suburban (NM) - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 03-01-2009, 02:06 PM

Quote:

Originally Posted by oldgold70c10

Thanks Hart_rod. That actually doesn't look much better than mine. Do you have some pics of the right (pass) side between the 3rd door rocker & wheel? What kind of shape is the right side rear wheel arch?

Wheel arch is good, but the lower part doesn't look much better than the other side. Do you have access to a lwb bed? I think it's the same and that might be a better option for you. Any interest in the roof rack?

Quote:

Originally Posted by olblue60@aol.com

It was a long shot! Thanks for the pics.

John

No worries John. I wish I could figure something out about the tank. Do you know anyone traveling from here to you or somewhat close? Do you go on vacation to the south anywhere? I could get it to Pensacola this fall if that would help. Let me know.

R/

**Hart_Rod** · 03-02-2009, 10:13 AM

more pictures & parts added

71 super · 03-02-2009, 04:19 PM

Thanks, just let me know about the drag link. Harold

**oldgold70c10** · 03-02-2009, 08:01 PM

Thank you Hart_Rod. LWB patch panels aren't a bad idea, would be easier to find. Roof rack sounds cool, but don't have use for one.
This thing had factory gauge cluster? What kind of shape is the under hood wiring harnesses & under dash harness? I'd also like the little ko plugs where the oil pres pipe goes thru the fire wall if its not in too bad shape.

**Hart_Rod** · 03-03-2009, 10:26 AM

Quote:

Originally Posted by oldgold70c10

Thank you Hart_Rod. LWB patch panels aren't a bad idea, would be easier to find. Roof rack sounds cool, but don't have use for one.
This thing had factory gauge cluster? What kind of shape is the under hood wiring harnesses & under dash harness? I'd also like the little ko plugs where the oil pres pipe goes thru the fire wall if its not in too bad shape.

It has the factory cluster and the oil line and grommet. Wiring harnesses are trashed. How about $35 Shipped for the cluster and oil line?

R/

Frizzle Fry · 03-03-2009, 05:56 PM

Quote:

Originally Posted by Hart_Rod

I'm keeping the door "B" pillars and part of the roof.
R/

Ahhhh, straight B-Pillars for Donkey. Very nice! Wish you were closer; I'd take the 5-lug parts for my 64.

Number98 · 03-03-2009, 08:53 PM

I am trying to talk myself out of the 5-lug rear as we speak!

TTT for ya....

PortHeadlight · 03-03-2009, 09:41 PM

I'm interested in the rear seat hold down brackets... Didn't see them listed. Thanks.

**Hart_Rod** · 03-03-2009, 09:47 PM

Quote:

Originally Posted by PortHeadlight

I'm interested in the rear seat hold down brackets... Didn't see them listed. Thanks.

I moved them to here:

http://67-72chevytrucks.com/vboard/s...d.php?t=331606

utvaquero59 · 03-03-2009, 11:13 PM

Is the front seat a bench? Are you selling the seatbelts? I'm looking for ones in better shape than mine. And what about those inner door panels? Selling them separate from the doors? If so, how much?

**Hart_Rod** · 03-03-2009, 11:50 PM

Quote:

Originally Posted by Frizzle Fry

Ahhhh, straight B-Pillars for Donkey. Very nice! Wish you were closer; I'd take the 5-lug parts for my 64.

Sounds like a road trip.......

.

Quote:

Originally Posted by Number98

I am trying to talk myself out of the 5-lug rear as we speak!

TTT for ya....

Don't be greedy, you've already got a posi, you just need some axles,

.

Quote:

Originally Posted by utvaquero59

Is the front seat a bench? Are you selling the seatbelts? I'm looking for ones in better shape than mine. And what about those inner door panels? Selling them separate from the doors? If so, how much?

The bench needs recovered. Seatbelts are sold. I've got a set of metal panels if that is what you are looking for. Let me know.

R/

**oldgold70c10** · 03-04-2009, 12:39 AM

Man, my timing couldn't be any worse!! I just picked up a gauge panel and oil pres. pipe from tieteeup this weekend! Wish I was closer on the front seat. Thanks for trying to help Hart_rod!

Ozark Tim · 03-04-2009, 09:14 AM

Would you sell the positraction unit out of the third member including the ring gear for $200.00? In other words I dont need the whole axle, just the differential. Dont need it immediately so you could wait until youve parted the rest.
Thanks,
Tim

**Hart_Rod** · 03-04-2009, 12:30 PM

Quote:

Originally Posted by oldgold70c10

Man, my timing couldn't be any worse!! I just picked up a gauge panel and oil pres. pipe from tieteeup this weekend! Wish I was closer on the front seat. Thanks for trying to help Hart_rod!

No worries. Let me know if you need anything else.

R/

Quote:

Originally Posted by Ozark Tim

Would you sell the positraction unit out of the third member including the ring gear for $200.00? In other words I dont need the whole axle, just the differential. Dont need it immediately so you could wait until youve parted the rest.
Thanks,
Tim

Tim - I will keep that in mind. I would prefer to make some one a great deal on the entire chassis. I'll let you know,

Rob

Ozark Tim · 03-04-2009, 04:17 PM

O.K. I appreciate that and know what you mean.

I have an open 3:07 diff I would send you so you could have your rolling chassis without the posi. Just swap the ring gear off your posi and place it on my open diff (I said I need it but that isnt so) and re mount it. Ive done it many times w/o any issues at all.

If so just send me a p.m. and we can work it out.

Thanks,
Tim

71 burb · 03-04-2009, 05:46 PM

can you show me a pic of the spare tire holder and what shape is it in because all i got is a hole where one was and shipping to 35117 thanks jason

**Hart_Rod** · 03-04-2009, 06:08 PM

Quote:

Originally Posted by 71 burb

can you show me a pic of the spare tire holder and what shape is it in because all i got is a hole where one was and shipping to 35117 thanks jason

Jason, - It has surface rust only and in great shape. I'll go $100 shipped. I can post better pictures later when I get home.

**Hart_Rod** · 03-05-2009, 11:22 AM

Quote:

Originally Posted by Ozark Tim

O.K. I appreciate that and know what you mean.

I have an open 3:07 diff I would send you so you could have your rolling chassis without the posi. Just swap the ring gear off your posi and place it on my open diff (I said I need it but that isnt so) and re mount it. Ive done it many times w/o any issues at all.

If so just send me a p.m. and we can work it out.

Thanks,
Tim

PM Sent, bttt.

Kansas Tinner · 03-05-2009, 09:01 PM

Hi. Could you show a pick of the back bumper please. Thanks.

DINS 1 · 03-06-2009, 01:45 AM

what about the bed sheet metal that run across the back of the burb where the tailgate mounts to the plywood floor? metal the is under the tail gate when it is closed. area that is red box in picture

**Hart_Rod** · 03-06-2009, 01:22 PM

Quote:

Originally Posted by Kansas Tinner

Hi. Could you show a pick of the back bumper please. Thanks.

Sorry KT, the bumper is gone.

Quote:

Originally Posted by DINS 1

what about the bed sheet metal that run across the back of the burb where the tailgate mounts to the plywood floor? metal the is under the tail gate when it is closed. area that is red box in picture

It's in great shape. How about $100 shipped? Let me know.

R/

MrGoodpliers · 03-06-2009, 07:05 PM

I'd be interested in lower trim clips. I also need one good headliner bow.

sourkraut · 03-07-2009, 09:21 AM

do you know if the all the guages had work? interested if they worked and shipping to 17022, please.

**Hart_Rod** · 03-07-2009, 01:15 PM

Quote:

Originally Posted by MrGoodpliers

I'd be interested in lower trim clips. I also need one good headliner bow.

There's only a few clips left on, how many do you need. What headliner bow are you talking about, the plastic ones or the metal ones? Pictures?

R/

Quote:

Originally Posted by sourkraut

do you know if the all the guages had work? interested if they worked and shipping to 17022, please.

I'm not sure if they work or not. They look to be in good shape though. Let me know.

R/

MrGoodpliers · 03-07-2009, 06:47 PM

I need one of the chromed plastic headliner bows. I like to use all push-in/bolt-on trim clips (ala 69-70) because they pull up nice and tight, unlike 71-72 that bulge and you see the tape. I'd be interested in all of them that you have.

03-02-2009, 10:13 AM	#27
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: Parting 1971 Suburban (NM) more pictures & parts added __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-02-2009, 04:19 PM	#28
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: Parting 1971 Suburban (NM) Thanks, just let me know about the drag link. Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

03-02-2009, 08:01 PM	#29
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,026	Re: Parting 1971 Suburban (NM) Thank you Hart_Rod. LWB patch panels aren't a bad idea, would be easier to find. Roof rack sounds cool, but don't have use for one. This thing had factory gauge cluster? What kind of shape is the under hood wiring harnesses & under dash harness? I'd also like the little ko plugs where the oil pres pipe goes thru the fire wall if its not in too bad shape. __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel Last edited by oldgold70c10; 03-02-2009 at 08:03 PM.

03-03-2009, 08:53 PM	#32
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: Parting 1971 Suburban (NM) I am trying to talk myself out of the 5-lug rear as we speak! TTT for ya....

03-03-2009, 09:41 PM	#33
PortHeadlight Registered User Join Date: Nov 2007 Location: Cape Elizabeth, Maine Posts: 196	Re: Parting 1971 Suburban (NM) I'm interested in the rear seat hold down brackets... Didn't see them listed. Thanks.

03-03-2009, 11:13 PM	#35
utvaquero59 Registered User Join Date: Aug 2007 Location: St. George, UT Posts: 70	Re: Parting 1971 Suburban (NM) Is the front seat a bench? Are you selling the seatbelts? I'm looking for ones in better shape than mine. And what about those inner door panels? Selling them separate from the doors? If so, how much?

03-04-2009, 12:39 AM	#37
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,026	Re: Parting 1971 Suburban (NM) Man, my timing couldn't be any worse!! I just picked up a gauge panel and oil pres. pipe from tieteeup this weekend! Wish I was closer on the front seat. Thanks for trying to help Hart_rod! __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

03-04-2009, 09:14 AM	#38
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Parting 1971 Suburban (NM) Would you sell the positraction unit out of the third member including the ring gear for $200.00? In other words I dont need the whole axle, just the differential. Dont need it immediately so you could wait until youve parted the rest. Thanks, Tim

03-04-2009, 04:17 PM	#40
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Parting 1971 Suburban (NM) O.K. I appreciate that and know what you mean. I have an open 3:07 diff I would send you so you could have your rolling chassis without the posi. Just swap the ring gear off your posi and place it on my open diff (I said I need it but that isnt so) and re mount it. Ive done it many times w/o any issues at all. If so just send me a p.m. and we can work it out. Thanks, Tim

03-04-2009, 05:46 PM	#41
71 burb Registered User Join Date: Mar 2008 Location: mount olive al Posts: 176	Re: Parting 1971 Suburban (NM) can you show me a pic of the spare tire holder and what shape is it in because all i got is a hole where one was and shipping to 35117 thanks jason

03-05-2009, 09:01 PM	#44
Kansas Tinner Registered User Join Date: Mar 2009 Location: Derby, Kansas Posts: 11	Re: Parting 1971 Suburban (NM) Hi. Could you show a pick of the back bumper please. Thanks.

03-06-2009, 01:45 AM	#45
DINS 1 Registered User Join Date: Apr 2000 Location: Webster City, Iowa USA Posts: 572	Re: Parting 1971 Suburban (NM) what about the bed sheet metal that run across the back of the burb where the tailgate mounts to the plywood floor? metal the is under the tail gate when it is closed. area that is red box in picture Attached Images __________________ Wade "DURAMAX BURB" Burb on 2004 chevy 2500HD 4x4 Duramax chassis Long term project 2004 2500HD 4x4 crew cab GMC Duramax 4" lift 35's 79 RS Camaro

03-06-2009, 07:05 PM	#47
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Re: Parting 1971 Suburban (NM) I'd be interested in lower trim clips. I also need one good headliner bow. __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

03-07-2009, 09:21 AM	#48
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Parting 1971 Suburban (NM) do you know if the all the guages had work? interested if they worked and shipping to 17022, please. __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

03-07-2009, 06:47 PM	#50
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Re: Parting 1971 Suburban (NM) I need one of the chromed plastic headliner bows. I like to use all push-in/bolt-on trim clips (ala 69-70) because they pull up nice and tight, unlike 71-72 that bulge and you see the tape. I'd be interested in all of them that you have. __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.