What mufflers are you guys running? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AceX · 03-27-2009, 11:02 PM

<<< One of the first Flowmaster Super 44's on a 2.5" cat-back system.

flamingbig10 · 03-28-2009, 12:15 AM

I have true duals no cats with 2 1/4 flowmasters super 40s cut a few inches after the muffler without turn downs, It's kinda loud inside and out, and really loud at 2,500 rpm in 1 st gear and I have a a coat of under coating, a roll of heat shield, floor mat sound deader and carpet, eventually I'm going to change to super 44 with 2 1/2 pipe that exits behind the rear tires

enaberif · 03-28-2009, 12:29 AM

flow 40s (i think) with the mufflers just behind the cab with 3 foot extensions to dump just behind the axles.

No drone and sounds good.

Manbearpig · 03-28-2009, 12:32 AM

Quote:

Originally Posted by 454HO

I've got Hooker Aero Chambers on my big block. Nice mellow tone at idle, no noticable drone at cruise, get comfortably loud at WOT.

http://www.holley.com/types/Aero%20Chamber.asp

http://www.holleytv.com/video_detail.php?mId=1598

Thats what I'm running on my 04 Sierra.

Planning on running a Dynomax Bullet on the K5

fast75 · 03-28-2009, 03:39 AM

40 series flowmasters, dumps LOUDLY right behind the cab.

tds · 03-28-2009, 09:03 AM

hooker headers, dual 3" pipe, dual cherry bomb extremes. its loud. to loud dumped before the axle...

87Lowrider · 03-28-2009, 09:21 AM

Before I switched to the big block, I was running flows with stock manifolds.

Problem was, it sounded like a mustang. I wanted a different sound for the 454. The 87 has Dynomax headers now with turbos. Very deep tone. Wife doesn't like the look of the headers in the eng compartment, so we're going with ceramic coated ones.. not sure which yet.

My '86 Jimmy has Dynomax headers, mufflers and 2 1/4 out behind the tires. When you stab it, it gets loud but it has a "airy" sound to it also.

Kenny

magwakeenercew2jh · 03-28-2009, 10:44 PM

Quote:

Originally Posted by boatpuller

i have flowmaster original 40's.i wanna be loud and obnoxious....snip.... i'm hard of hearing from 31yrs of working in the paper mill.so,it all work's out.

Very cool. The link below is a 72 I built and sold.

I am working on the "combo truck" right now. Many year's parts....Just put 40's on it, too. As a matter of fact, today I just sold a set of 40's with 50 miles on them for 80 bucks.....

YouTube - Rumble in the Driveway

I'm a fan of Flowmasters. But, then again, the truck is not my primary transportation. When we go off into the sunset, we take the wife's Japanese car.....I think she's running Nissan Morano exhaust.

If I'm tripping around by myself, I drive the Jeep. Six banger geared to drive up a flagpole, and get out of the way of faster traffic once I'm up to highway speed. Works for me. Nothing's as good as driving the truck......You guys know that.

Well, I guess if I had a 34 Ford Vickie with a 350/700R/air/electric windows, satellite radio, etc......

bowtiecb · 03-28-2009, 11:15 PM

i have 3 chamber flows, but i want some borlas, but have never heard them on carbed, true dual v8, so i dont want to spend that much money, and have to yankem off

tvblazer78 · 03-29-2009, 11:43 AM

That's what I have two 3" 3 chamber flows and it get's..

*78 Chevyrado* · 03-29-2009, 01:14 PM

I have a dynomax super turbo muffler, single exhaust. When I do my duals I'm going to get cherry bomb vortex mufflers.

84 400 · 03-29-2009, 05:46 PM

Flows drone like no tomorrow. Ando on long road trips it gets really really old!!!!!!!!!!! I do like that mine is somewhat loud but I think I would be happier with cut outs and some dynomax mufflers. that way it is loud when I want and mellow but agressive when you get on it.

I have long tube hookers to y to a cat flowmaster 50, then two straight out the back.

My 77 has stock manifolds, y then a Thrush glass pack and dumps out the side before the rea. It has less drone then the flowsmaster. My freind has try headers to an X pipe two twin stainless dynomax mufflers. It sounds real classy. small rumble on idle but not a dead give away. then when u get one it it screams. No highway drone.

cjracing15 · 03-29-2009, 07:54 PM

Here are some pics I took of my mufflers and how they are run. I plan on running them all the way out the back next month.

pokethesmot · 03-29-2009, 08:05 PM

duel cherry bombs

babyJay · 03-29-2009, 08:38 PM

I run wide open Cat on the 87...and several peeps have stated it sounds great...I hate it tho. Will fix someday...

badblu97 · 03-30-2009, 11:02 AM

two in, one out to a turn down before the axle, but im running a melowtone on a 400 smallblock with a bit done to it. I Love it! Also running a melowtone on the 07 silverado, after-cat with turn downs after the axle...no drone, not too loud, just right...I think it adds a "classy rumble" to the truck......

Adams74Chevy · 03-30-2009, 11:56 AM

Before I spun the bearing in my 350 I had stock manifolds & y-pipe to a generic $15glasspack to stock tailpipe. It sounds decent but I have summit truck headers waiting for when I switch the engine with the intent to run duals and still up in the air for which mufflers to get...

87Bob · 03-30-2009, 12:22 PM

No mufflers at all just left the cat on. Mellow tone like motor boat!

grinch4om · 03-30-2009, 04:22 PM

hooker headers, 3" exhaust, had 2 chamber flows, dump right in front of axle, changed mufflers to 2 maremont 102311(fit 94 c3500 HD) 3'' all the way through and quiet. notice no change in seat of the pants feel and doesn't wake the dead to and from the fire house...

Mike_D · 03-30-2009, 06:17 PM

I'm running Heddman headers, true duals (2.5"), to Summit 2.5" turbo mufflers. I've run flowmasters, and Bassani on previous vehicles, both of which have a mean rumble and a lot of interior noise. I choose the Summit mufflers because they have very little interior noise and they were dirt cheap.

Mike_D · 03-31-2009, 01:08 AM

Here's how my set up is

[IMG]

[/IMG]

[IMG]

[/IMG]

632bbc · 04-07-2009, 10:45 PM

Running 3" 40 series Flowmasters. . . . love the sound. . .took radio out. . .couldn't here it over exhaust and tire whine. . . lol

88 Dippy · 04-08-2009, 01:12 AM

dual glasspacks that are quiter then my grand Prix's stock cat back

i need to find a way to fix this so i can hear my truck

*nekkidhillbilly* · 04-08-2009, 01:16 AM

i dont think i am at the moment but it will get magnaflows or dynomaxs

slash crashley · 04-08-2009, 07:27 PM

250 I6 to cat.

muffler rusted / fell off. i really like the sound. if i do replace the exhaust while i still have the 250, i'll run a cherry bomb glass pack that i already have. i'll run this motor until the head cracks. there's only so much money to go around. as long as it's driving and sounding decent i'm not replacing the 250. shame there's not much you can do with the integral head inline.

03-27-2009, 11:02 PM	#26
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: What mufflers are you guys running? <<< One of the first Flowmaster Super 44's on a 2.5" cat-back system. __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

03-28-2009, 12:15 AM	#27
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: What mufflers are you guys running? I have true duals no cats with 2 1/4 flowmasters super 40s cut a few inches after the muffler without turn downs, It's kinda loud inside and out, and really loud at 2,500 rpm in 1 st gear and I have a a coat of under coating, a roll of heat shield, floor mat sound deader and carpet, eventually I'm going to change to super 44 with 2 1/2 pipe that exits behind the rear tires __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 03-28-2009 at 12:22 AM.

03-28-2009, 12:29 AM	#28
enaberif Registered User Join Date: Jan 2009 Location: Calgary, AB Posts: 1,181	Re: What mufflers are you guys running? flow 40s (i think) with the mufflers just behind the cab with 3 foot extensions to dump just behind the axles. No drone and sounds good.

03-28-2009, 03:39 AM	#30
fast75 Go Hard or Go Home! Join Date: Dec 2008 Location: quitman, tx Posts: 261	Re: What mufflers are you guys running? 40 series flowmasters, dumps LOUDLY right behind the cab. __________________ 75 short wide 350, some mods, scare the piss outta ya quick. 2008 Dodge crew cab. YEAH, it's got a hemi, your ass is going to jail quick. Some day's, it's just not worth chewing through the restraints................................

03-28-2009, 09:03 AM	#31
tds Registered User Join Date: Jul 2007 Location: minnesota Posts: 191	Re: What mufflers are you guys running? hooker headers, dual 3" pipe, dual cherry bomb extremes. its loud. to loud dumped before the axle... __________________ 1981 - C-10 SCSB Planning on putting this thing on it's rocker!

03-28-2009, 09:21 AM	#32
87Lowrider Navy Radioman Veteran Join Date: Jul 2007 Location: Western Kentucky Posts: 1,350	Re: What mufflers are you guys running? Before I switched to the big block, I was running flows with stock manifolds. Problem was, it sounded like a mustang. I wanted a different sound for the 454. The 87 has Dynomax headers now with turbos. Very deep tone. Wife doesn't like the look of the headers in the eng compartment, so we're going with ceramic coated ones.. not sure which yet. My '86 Jimmy has Dynomax headers, mufflers and 2 1/4 out behind the tires. When you stab it, it gets loud but it has a "airy" sound to it also. Kenny __________________ 1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side - At the Body Shop Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside Last edited by 87Lowrider; 03-28-2009 at 09:24 AM.

03-28-2009, 11:15 PM	#34
bowtiecb Registered User Join Date: Oct 2006 Location: alabama Posts: 79	Re: What mufflers are you guys running? i have 3 chamber flows, but i want some borlas, but have never heard them on carbed, true dual v8, so i dont want to spend that much money, and have to yankem off

03-29-2009, 11:43 AM	#35
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: What mufflers are you guys running? That's what I have two 3" 3 chamber flows and it get's.. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

03-29-2009, 01:14 PM	#36
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: What mufflers are you guys running? I have a dynomax super turbo muffler, single exhaust. When I do my duals I'm going to get cherry bomb vortex mufflers.

03-29-2009, 05:46 PM	#37
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: What mufflers are you guys running? Flows drone like no tomorrow. Ando on long road trips it gets really really old!!!!!!!!!!! I do like that mine is somewhat loud but I think I would be happier with cut outs and some dynomax mufflers. that way it is loud when I want and mellow but agressive when you get on it. I have long tube hookers to y to a cat flowmaster 50, then two straight out the back. My 77 has stock manifolds, y then a Thrush glass pack and dumps out the side before the rea. It has less drone then the flowsmaster. My freind has try headers to an X pipe two twin stainless dynomax mufflers. It sounds real classy. small rumble on idle but not a dead give away. then when u get one it it screams. No highway drone. __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

03-29-2009, 07:54 PM	#38
cjracing15 Registered User Join Date: Jan 2007 Location: Lexington, TN Posts: 1,427	Re: What mufflers are you guys running? Here are some pics I took of my mufflers and how they are run. I plan on running them all the way out the back next month. Attached Images __________________ The fleet 94 Chevy 4x4 reg cab 2018 Traverse (wifes car) 1977 SWB stepside 1949 Chevy truck Last edited by cjracing15; 03-29-2009 at 07:55 PM.

03-29-2009, 08:05 PM	#39
pokethesmot profeshinaly unimployed Join Date: Dec 2008 Location: hazlehurst, GA Posts: 1,232	Re: What mufflers are you guys running? duel cherry bombs __________________ my ride click here my myspace "having mud flaps is like asking for a smaller trophy"

03-29-2009, 08:38 PM	#40
babyJay Arrived on a Pale Horse Join Date: Mar 2007 Location: SnagTown Indiana Posts: 2,524	Re: What mufflers are you guys running? I run wide open Cat on the 87...and several peeps have stated it sounds great...I hate it tho. Will fix someday... __________________ Jason 87 V30 350TBI/400 White w/Boss V-plow 89 R3500 CC SRW

03-30-2009, 11:02 AM	#41
badblu97 Double 6's Join Date: Oct 2008 Location: Winter Haven, FL Posts: 349	Re: What mufflers are you guys running? two in, one out to a turn down before the axle, but im running a melowtone on a 400 smallblock with a bit done to it. I Love it! Also running a melowtone on the 07 silverado, after-cat with turn downs after the axle...no drone, not too loud, just right...I think it adds a "classy rumble" to the truck...... __________________ Street Glidin! 1966 LWB Custom Cab (sold) 1982 Short Fleet (under the knife) 1998 S10 2wd Fleet 2007 Chevy Silverado Crew 2007 Harley Davidson Street Glide Last edited by badblu97; 03-30-2009 at 11:02 AM.

03-30-2009, 11:56 AM	#42
Adams74Chevy Registered User Join Date: Mar 2009 Location: MD Posts: 417	Re: What mufflers are you guys running? Before I spun the bearing in my 350 I had stock manifolds & y-pipe to a generic $15glasspack to stock tailpipe. It sounds decent but I have summit truck headers waiting for when I switch the engine with the intent to run duals and still up in the air for which mufflers to get...



Register or Log In To remove these advertisements.

03-30-2009, 12:22 PM	#43
87Bob Registered User Join Date: Nov 2007 Location: Franklin Indiana Posts: 635	Re: What mufflers are you guys running? No mufflers at all just left the cat on. Mellow tone like motor boat! __________________ My Truck's not leaking its marking its territory!

03-30-2009, 04:22 PM	#44
grinch4om dang its hot Join Date: Nov 2006 Location: frankfort kentucky Posts: 1,349	Re: What mufflers are you guys running? hooker headers, 3" exhaust, had 2 chamber flows, dump right in front of axle, changed mufflers to 2 maremont 102311(fit 94 c3500 HD) 3'' all the way through and quiet. notice no change in seat of the pants feel and doesn't wake the dead to and from the fire house... Last edited by grinch4om; 03-30-2009 at 04:22 PM.

03-30-2009, 06:17 PM	#45
Mike_D Registered User Join Date: Jan 2009 Location: South Bay, Ca Posts: 36	Re: What mufflers are you guys running? I'm running Heddman headers, true duals (2.5"), to Summit 2.5" turbo mufflers. I've run flowmasters, and Bassani on previous vehicles, both of which have a mean rumble and a lot of interior noise. I choose the Summit mufflers because they have very little interior noise and they were dirt cheap.

03-31-2009, 01:08 AM	#46
Mike_D Registered User Join Date: Jan 2009 Location: South Bay, Ca Posts: 36	Re: What mufflers are you guys running? Here's how my set up is [IMG][/IMG] [IMG][/IMG]

04-07-2009, 10:45 PM	#47
632bbc Registered User Join Date: Nov 2008 Location: Excelsior Springs MO Posts: 24	Re: What mufflers are you guys running? Running 3" 40 series Flowmasters. . . . love the sound. . .took radio out. . .couldn't here it over exhaust and tire whine. . . lol

04-08-2009, 01:12 AM	#48
88 Dippy Registered User Join Date: Feb 2009 Location: mt. Pleasant, MI Posts: 246	Re: What mufflers are you guys running? dual glasspacks that are quiter then my grand Prix's stock cat back i need to find a way to fix this so i can hear my truck __________________ 1974 chevy Cheyenne C10 "The Mutt":4x4 convertion, NP208, 700-R4, stock 350, edelbrock Torker intake, edelbrock 600 CFM carb, duels 2001 Pontiac Grand Prix GT: 3.8L supercharged, 9.2:1 comprestion, ZZP XP cam, home made intake, 2 1/2" exhuast, 10psi of boost

04-08-2009, 01:16 AM	#49
nekkidhillbilly Account Suspended Join Date: Apr 2009 Location: hazard, ky Posts: 1,674	Re: What mufflers are you guys running? i dont think i am at the moment but it will get magnaflows or dynomaxs

04-08-2009, 07:27 PM	#50
slash crashley lucky knuckles Join Date: Nov 2007 Location: orlando, florida Posts: 124	250 I6 to cat. muffler rusted / fell off. i really like the sound. if i do replace the exhaust while i still have the 250, i'll run a cherry bomb glass pack that i already have. i'll run this motor until the head cracks. there's only so much money to go around. as long as it's driving and sounding decent i'm not replacing the 250. shame there's not much you can do with the integral head inline.

Register or Log In To remove these advertisements.