Rebuild of my K-10

[jott_06]

sorry for the small pic. I took it with my cell phone

[Rollinsqrbdy]

shes looking good bud

[jott_06]

well I've been filling my gas tank through the wheel well all summer because my gas tank is on the wrong side for the bed so i decided to get creative and graft a gas filler door into my fender. Its out of a 96 chevy pickup. I used the factory filler neck and hose along with a piece of exhaust tubing i had bent to get it working.

[jott_06]

and some more...

[jott_06]

and just for the record it is fully welded in. I just didnt take any pics of that or the body work.

[Devil'S Ride]

Nice work bud. Looks good. What are your plans? Just building it as a daily driver? Show truck? Trail rig?

[jott_06]

for now its just a toy. I drive it occasionally to work, around town, and to haul my 4 wheeler. Then sometimes on the weekends i take it out wheeling. I'm gonna have to drive it this coming winter because my other vehicles are to nice to take out in the snow and salt.

[jott_06]

No new progress. I did think of a name though

[Rollinsqrbdy]

jott 06- Man i am really lovn that truck. Its sweet. That gas fuel door is sweet. nice touch. You got some more pics of it?

[thirdstreettito]

So far that is sweet. I'd do it to my truck, but Im lookin for a dually, plus my truck is too rare to "pimp it".

[jott_06]

No real progress lately. I took a nice chunk out of the yoke on my transfer case right after christmas when my universal joint broke so the truck was down for about a month while i tried to find a used yoke for it. It is fixed now though and i've been driving it daily in all the snow we've been getting. here is a pic i took at my girlfriends. I didnt want to block the driveway so i made my own parking spot in the snow.

[Rollinsqrbdy]

Nice. Its nice to see you back on here.

[jott_06]

thanks. I'm wanting to get back to work on the truck this summer. I'm gonna try to find a door and a set of fenders this weekend at a local swap meet. Then i'm going to order rockers and cab corners at work.

[hawleykt]

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

[jott_06]

Sorry i dont have the steps anymore. I sold all of my unused parts from both trucks to my buddy last summer because he wanted the axles for a geo tracker he was building for mud bogging and he gave up on the project and scrapped it all

[semperfidoordie]

I know I'm bringing back a dead thread but this truck is sweet. Any insight on how those 36s cleared that lift? Also what your fender measurements with that lift are. I have an unknown lift on my truck and didn't know how to tell what size it is

[jott_06]

Been a long time since i have posted about this truck. Over the past few years i swapped in a bench seat, rust free fleetside bed from a truck that was on fire, and i put my 15x10 slots on it. It has just been a winter/work truck. I have a family now so the truck doesnt have enough room for all of us. But thanks to a new addition to my fleet thats about to change.

[jott_06]

I got a 1988 2wd suburban silverado with a perfect original body. The plans are to swap the entire drivetrain from the truck into the suburban.

[jott_06]

Here is the link to my new build. Its slow now but once some garage space clears up it will take off.
http://67-72chevytrucks.com/vboard/s...d.php?t=626263

[jott_06]

Here the truck is at its last stop...The Crusher!

[jott_06]

It was a good truck but now I have an even better Suburban

[ryanroo]

nice burb!