71 Cheyenne Super for parts AZ

[71jimmy]

Any chance you'll be cutting up the bed for patch panels? thanks

[t korinek]

Here we go will try to answer all the questions

71blksuper4x4, Glove box lid staying with cab for now, emblem chrome in nice shape, no pitting, needs paint, seat belts are sold local(they were faded anyways)Tailgate is a good driver quality, there are some dents & a slot was ground in the top near the center, its not beat to death, about a 6.5 on a scale of 1-10, no rust.

chuckmc8 headliner is in good shape, bright blue, plastic chrome will need a paint job $25 shipping

rockc fender has a dent on the lip, see pic no rust except surface, will have to double check size for shipping looks like about $40

too much stuff, your in line on the glovebox

oldblue60 The trim is in good shape, no major dents or dings, how about $35 + shipping

novafrog, see pics & previous description of tailgate, door bottoms are nice with only surface rust, see pics.

turpmcspray rearview has a few spots, not perfect though, hard to get a pic of it $10, stainless handle is in good shape $20

lks dcvn what part of the wiring are you looking for?

rangerfj40 grill & inner is $50, see pics, has a hole punched in it near the top pass. side & a a few small dings This support is rusted, I have another good one for $75. Shipping will run about $100

mosesburb, already have it set aside for my 4x4 project, You get the next one.

Space, they are the same in just about every aspect except they don't have the screw under the wing window, you will have to swap your regulators & inner door handle to accomodate the thicker plastic panel on the 72 . If you have a greyhound station near you it will cost abot $85 each door for shipping.

Thanks, yote, don't have any passenger mirrors, may have a line on an nos pair though if interested.

markster5, bumper not for sale, brackets $35 shipped

blalip94 selling the trim as complete sets

ewoody, glass is coming out, seat & seat belts coming out, coulmn coming out, the sooner you buy it the more that comes with it & it has a title. Non AC, low hump cab

jw76 heres a pic of the trailing arm, they will only have surface rust or I don't sell them, $115 shipped, Crossmember $45 shipped.

71 jimmy, I have a few beds for patch panels, what do u need?

[t korinek]

more pics

[t korinek]

Some more pics

[t korinek]

& some more pics

[t korinek]

Outer door handles in good shape $20 pair

[t korinek]

The last of the pics for now.
Thanks,
Tom

[71blksuper4x4]

Tom, I would like to speak for the fender emblems. The glovebox door and tailgate, I will respectively decline. Glovebox door seems to have a 72' emblem in it. Thank you and let me know what I owe and how to get it to you again. Trevor

[JW76]

I will take both the trailing arms and crossmember shipped to 02917. That will total $160. Is this correct? Also, I am very new at this. How do I send you payment? Thanks for you help.

[JW76]

I do not have Paypal. Could I do a certified check or money order?

[CUSTOM/10]

What kind of shape are the front inner fenders in & price ?

Shipping to 03873

Gary

[rockc]

Thanks, I will pass on fender.

[JW76]

I just wanted to clarify, $45 is the price for the trailing arm crossmember?

[t korinek]

JW76 & 71blksuper4x4 pms sent

custom10, driver inner is good, passenger is rusted under the battery tray, I'll see if I have another good passenger side. these require a very large box, last time I shipped a pair of these it cost about $70 If I have a nice pair they will be $150 shipped & may have to go to the bus station.

[CUSTOM/10]

OK Let me know what you have, I'm looking for very nice stuff for the truck I doing, No rust, or damage.

Let me know.

Gary

[283 Man]

motor&tranny what are you asking for those?

[ewoody625]

Thanks Tom, I am very interested in the cab. How much for the cab w/atleast the glass and the doors? I would pick them up.
Eric

[t korinek]

Custom10 OK
283man $250 for motor & trans, don't know if they run or not.
ewoody $600 for the cab & doors & all the glass intact

[ewoody625]

Tom if there is no one in line for the doors I will take them. I'm going to pass on the cab for now. I'm new to this so please tell me what the process is. I have a buddy in your area that will pick them up for me.
Thanks
Eric

[turp mcspray]

On the interior mirror assembly and tailgate handle stainless, would you take $25for the pair? Thanks.
Scott

[timzrides]

interested in cab if next. can you give more details on the cab, what needs fixed besides rockers, i will contact a shipper i know on wednesday. thanks

[t korinek]

timzrides, looks like just the rockers, a spot of rust on the passenger cab corner, floor supports solid, floor good, no big dents. Cab is located in mesa az & can be loaded onto just about anything with a tractor.

turp I'll take $25 + shipping

ewoody, there were a couple others asking for pics & shipping quotes. I'll give them both until tomorrow at this time to decide if they want them.

[turp mcspray]

I will take the mirror and stainless piece. pm to you.

[FOREVER71]

need price on power steering pump and all pullies...to 97060..thanks.

[71jimmy]

Tom, I need a passenger side rear quarter panel section. Basically about 2 inches down from the top of the bed side, a couple of inches in front of the side marker, all the way down and including the tail light section. It needs to be dent and rust free (relatively speaking). Would prefer without the holes for chrome etc. Mine's a plain Jimmy.

Shipping would be to 95628. I can do cash, MO, Cashiers Check or Paypal. Thanks for your help.
Roland