Parting out 71 LWB GMC - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Daverde · 06-21-2009, 07:09 AM

Is the bed and fenders sold?
could use em on my 71 c20
can you ship?em (fenders)by greyhound are they solid?
thanks Dave

sgaylord · 06-21-2009, 07:52 AM

They are still available. However they will require some work. The Dr. front fender is in decent shape, where the passenger side will require a patch in the bottom of the front section. The bed floor is rusted along the edges. I will take some close up pics and post them later today.

Thanks for your interest.

Steve

sgaylord · 06-21-2009, 08:09 AM

david wiebelt

Re: Parting out 71 LWB GMC
The steering wheel and the trim I'm going to pass on. I just bought another truck and the roof and the drip edge molding is rusted thru. can I get pics of that. If not rusted out I'm interesed in that plus the back window.

I will get some pics today and post them. The drip rails are in good shape, I will include some pics of that as well. I do have someone inline for the cab roof, if that falls through, I will have you next in line and will remove the drip rails if you want them. The back window is yours. How's $20 + shipping sound on the window? Let me know.

IndyRich

Re: Parting out 71 LWB GMC
Thanks , but I'll pass on the inner fender.I might as well find both instead of just one.

Not a problem. Good luck with your truck. I will say you probably want to find them local. I checked LMC and Goodmark on shipping and they both ship inner fenders truck freight. LMC was $125 shipping on a $99 part. That is crazy...

c10_1971

Re: Parting out 71 LWB GMC
what is the shape of the vent window assemblies? how much for the vent window assemblies shipped to 28787?

I will get you some pics today as well. I have several of these and will include pics of them all.

Thanks again everyone for your interest.

sgaylord · 06-21-2009, 02:01 PM

c10_1971

Re: Parting out 71 LWB GMC
what is the shape of the vent window assemblies? how much for the vent window assemblies shipped to 28787?

Here are the pics. They are in good driver shape

Name: DSCN1940.jpg
Views: 142
Size: 99.2 KB

Name: DSCN1940.jpg
Views: 142
Size: 99.2 KB

Name: DSCN1941.jpg
Views: 142
Size: 55.0 KB

.

I would not consider them ready for a show truck because the chrome has some pitting. Nothing big, it just looks like dirt on it. I don't think it would polish off though. All of the parts appear to be there and if you still want them how's $35 + shipping for the pair?

david wiebelt

Re: Parting out 71 LWB GMC
The steering wheel and the trim I'm going to pass on. I just bought another truck and the roof and the drip edge molding is rusted thru. can I get pics of that. If not rusted out I'm interesed in that plus the back window.

Here are the pics of the cab dripwelds. Let me know if you are still interested. They look like they are in good shape. Like I mentioned before, i have someone who is interested in the entire roof. If they back out and you are still interested, it's yours.

Name: DSCN1932.jpg
Views: 141
Size: 100.3 KB

Name: DSCN1932.jpg
Views: 141
Size: 100.3 KB

Name: DSCN1927.jpg
Views: 140
Size: 28.8 KB

Name: DSCN1930.jpg
Views: 138
Size: 100.1 KB

Daverde

Is the bed and fenders sold?
could use em on my 71 c20
can you ship?em (fenders)by greyhound are they solid?

You may want to source some fenders locally. Here are the pics I promised. They are not in bad shape but for what you would have to pay in shipping, it may be worth finding some in better shape locally.

Thanks again guys. Happy Fathers Day and I appreciate your interest.

sgaylord · 06-21-2009, 02:05 PM

More pics:::::

Name: DSCN1945.jpg
Views: 136
Size: 49.9 KB

Name: DSCN1935.jpg
Views: 135
Size: 100.3 KB

Name: DSCN1944.jpg
Views: 136
Size: 55.2 KB

Name: DSCN1933.jpg
Views: 137
Size: 98.6 KB

Name: DSCN1936.jpg
Views: 134
Size: 99.6 KB

*c10_1971* · 06-21-2009, 07:11 PM

I'll take the vent windows pending shipping quote to 28787.

**steinepstein** · 06-21-2009, 07:23 PM

I'm interested in the radiator and radiator brackets, if they don't have any rust and the radiator isn't leaking. They will ship to 88220

david wiebelt · 06-21-2009, 08:15 PM

If he pass I'll take it with the back cab including the back window cut 3inches below the back window chrome trim. Let me know the price for the entire piece and I'll pick it up.

sgaylord · 06-21-2009, 10:42 PM

steinepstein

Re: Parting out 71 LWB GMC
I'm interested in the radiator and radiator brackets, if they don't have any rust and the radiator isn't leaking. They will ship to 88220

I did not see where the radiator was leaking anywhere. Are you just looking for the upper brackets or upper and lower? I will take some pics tomorrow and post them.

david wiebelt

Re: Parting out 71 LWB GMC
If he pass I'll take it with the back cab including the back window cut 3inches below the back window chrome trim. Let me know the price for the entire piece and I'll pick it up.

You are up he backed out. I will send you a PM and we can discuss.

sgaylord · 06-22-2009, 11:08 AM

steinepstein
Re: Parting out 71 LWB GMC
I'm interested in the radiator and radiator brackets, if they don't have any rust and the radiator isn't leaking. They will ship to 88220

Here are the pics I promised. When I drove it home it did not leak or run the engine hot. I tested it again this morning by filling it with water and after setting for a while it did not leak. I have no way of pressure testing it. There are two copper tabs with numbers stamped on them protruding from the lower middle section. I included pics of these because in the second pic it looks like there is some damage in that area but it's just these tabs.

The braces are in great shape. I will sell that rad for $50 and the braces for $10. $60 plus shipping which looks to be about $25 via UPS ground. Let me know.

Name: DSCN1967.jpg
Views: 129
Size: 102.4 KB

Name: DSCN1967.jpg
Views: 129
Size: 102.4 KB

Name: DSCN1968.jpg
Views: 129
Size: 42.3 KB

Name: DSCN1969.jpg
Views: 126
Size: 56.9 KB

Name: DSCN1970.jpg
Views: 127
Size: 39.2 KB

Name: DSCN1971.jpg
Views: 125
Size: 42.0 KB

**steinepstein** · 06-22-2009, 11:33 AM

I'm going to need those lower rad brackets also.

How about $75 shipped for the rad and brackets?

Thanks,

JE

sgaylord · 06-22-2009, 12:42 PM

steinepstein

Re: Parting out 71 LWB GMC
I'm going to need those lower rad brackets also.

JE,
That's fine. It's yours. MO or Paypal? In the meantime, I will look and see about the lowers.

Thanks,
Steve

**steinepstein** · 06-22-2009, 12:53 PM

Paypal, I'll PM you.

JE

smith2481 · 06-22-2009, 02:37 PM

how about the heater and fan controller good shape and how much shipped

sgaylord · 06-22-2009, 03:27 PM

smith2481

Re: Parting out 71 LWB GMC
how about the heater and fan controller good shape and how much shipped

It has a broken center arm. Chrome is in decent shape and overall looks pretty good. Let me know if you are still interested and I will get you some pics.

Thanks for looking,
Steve

sgaylord · 06-23-2009, 09:17 AM

steinepstein

IRT Radiator shipment.

Hi Jon, I shipped your radiator today USPS and you should have it in about 7 days. It's insured so if there are any problems with the shipping let me know. I really appreciate your business and I have included the rubber radiator pads free of charge as a thank you.

Steve

**D.PASSMORE** · 07-08-2009, 04:18 PM

Still available? Intrested in both front fenders and drivers side bedside.

*mrhino* · 07-08-2009, 05:15 PM

id be interested in the drivers side far rear lower trim molding if still available, also both door locks and key and maybe the heater box. thanks mike

markster5 · 07-09-2009, 07:55 PM

where is sanderson ?wondering how long hf drive it would to pick ir up ?

OLEBEATER · 07-09-2009, 08:55 PM

Interested in the seat belts if they are black and also the brake booster/master cyl assembly. Price and shipping to Va. 22435. Thanks

jsmithbm · 07-09-2009, 10:04 PM

If the instrument panel is still for sale, could i get a good pic of it. Shipping to 31904? Thanks !

Grippo87 · 07-25-2009, 06:20 PM

Would you be able to post some pics of the bed and a price?

Thanks,

Mike

OLEBEATER · 07-27-2009, 07:16 AM

Brake booster assembly arrrived Friday in good shape, thanks. Roland

SevenOne · 07-27-2009, 02:24 PM

Price/Condition on the bed?Thanx -james

markster5 · 07-27-2009, 04:59 PM

i'm still interested in hood if you still hav it. thanks Mark

06-21-2009, 07:09 AM	#26
Daverde Registered User Join Date: Oct 2003 Location: Boston MA. Posts: 10	Re: Parting out 71 LWB GMC Is the bed and fenders sold? could use em on my 71 c20 can you ship?em (fenders)by greyhound are they solid? thanks Dave

06-21-2009, 07:52 AM	#27
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Parting out 71 LWB GMC They are still available. However they will require some work. The Dr. front fender is in decent shape, where the passenger side will require a patch in the bottom of the front section. The bed floor is rusted along the edges. I will take some close up pics and post them later today. Thanks for your interest. Steve __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

06-21-2009, 08:09 AM	#28
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Parting out 71 LWB GMC david wiebelt Re: Parting out 71 LWB GMC The steering wheel and the trim I'm going to pass on. I just bought another truck and the roof and the drip edge molding is rusted thru. can I get pics of that. If not rusted out I'm interesed in that plus the back window. I will get some pics today and post them. The drip rails are in good shape, I will include some pics of that as well. I do have someone inline for the cab roof, if that falls through, I will have you next in line and will remove the drip rails if you want them. The back window is yours. How's $20 + shipping sound on the window? Let me know. IndyRich Re: Parting out 71 LWB GMC Thanks , but I'll pass on the inner fender.I might as well find both instead of just one. Not a problem. Good luck with your truck. I will say you probably want to find them local. I checked LMC and Goodmark on shipping and they both ship inner fenders truck freight. LMC was $125 shipping on a $99 part. That is crazy... c10_1971 Re: Parting out 71 LWB GMC what is the shape of the vent window assemblies? how much for the vent window assemblies shipped to 28787? I will get you some pics today as well. I have several of these and will include pics of them all. Thanks again everyone for your interest. __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

06-21-2009, 02:01 PM	#29
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Parting out 71 LWB GMC c10_1971 Re: Parting out 71 LWB GMC what is the shape of the vent window assemblies? how much for the vent window assemblies shipped to 28787? Here are the pics. They are in good driver shape . I would not consider them ready for a show truck because the chrome has some pitting. Nothing big, it just looks like dirt on it. I don't think it would polish off though. All of the parts appear to be there and if you still want them how's $35 + shipping for the pair? david wiebelt Re: Parting out 71 LWB GMC The steering wheel and the trim I'm going to pass on. I just bought another truck and the roof and the drip edge molding is rusted thru. can I get pics of that. If not rusted out I'm interesed in that plus the back window. Here are the pics of the cab dripwelds. Let me know if you are still interested. They look like they are in good shape. Like I mentioned before, i have someone who is interested in the entire roof. If they back out and you are still interested, it's yours. Daverde Is the bed and fenders sold? could use em on my 71 c20 can you ship?em (fenders)by greyhound are they solid? You may want to source some fenders locally. Here are the pics I promised. They are not in bad shape but for what you would have to pay in shipping, it may be worth finding some in better shape locally. Thanks again guys. Happy Fathers Day and I appreciate your interest. __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

06-21-2009, 02:05 PM	#30
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Parting out 71 LWB GMC More pics::::: __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

06-21-2009, 07:11 PM	#31
c10_1971 Account Suspended Join Date: May 2009 Location: Asheville, NC Posts: 75	Re: Parting out 71 LWB GMC I'll take the vent windows pending shipping quote to 28787.

06-21-2009, 07:23 PM	#32
steinepstein Senior Member Join Date: Nov 2003 Location: Chicago, IL Posts: 374	Re: Parting out 71 LWB GMC I'm interested in the radiator and radiator brackets, if they don't have any rust and the radiator isn't leaking. They will ship to 88220

06-21-2009, 08:15 PM	#33
david wiebelt Registered User Join Date: Jan 2009 Location: florida Posts: 172	Re: Parting out 71 LWB GMC If he pass I'll take it with the back cab including the back window cut 3inches below the back window chrome trim. Let me know the price for the entire piece and I'll pick it up.

06-21-2009, 10:42 PM	#34
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Parting out 71 LWB GMC steinepstein Re: Parting out 71 LWB GMC I'm interested in the radiator and radiator brackets, if they don't have any rust and the radiator isn't leaking. They will ship to 88220 I did not see where the radiator was leaking anywhere. Are you just looking for the upper brackets or upper and lower? I will take some pics tomorrow and post them. david wiebelt Re: Parting out 71 LWB GMC If he pass I'll take it with the back cab including the back window cut 3inches below the back window chrome trim. Let me know the price for the entire piece and I'll pick it up. You are up he backed out. I will send you a PM and we can discuss. __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

06-22-2009, 11:08 AM	#35
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Parting out 71 LWB GMC steinepstein Re: Parting out 71 LWB GMC I'm interested in the radiator and radiator brackets, if they don't have any rust and the radiator isn't leaking. They will ship to 88220 Here are the pics I promised. When I drove it home it did not leak or run the engine hot. I tested it again this morning by filling it with water and after setting for a while it did not leak. I have no way of pressure testing it. There are two copper tabs with numbers stamped on them protruding from the lower middle section. I included pics of these because in the second pic it looks like there is some damage in that area but it's just these tabs. The braces are in great shape. I will sell that rad for $50 and the braces for $10. $60 plus shipping which looks to be about $25 via UPS ground. Let me know. __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

06-22-2009, 11:33 AM	#36
steinepstein Senior Member Join Date: Nov 2003 Location: Chicago, IL Posts: 374	Re: Parting out 71 LWB GMC I'm going to need those lower rad brackets also. How about $75 shipped for the rad and brackets? Thanks, JE

06-22-2009, 12:42 PM	#37
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Parting out 71 LWB GMC steinepstein Re: Parting out 71 LWB GMC I'm going to need those lower rad brackets also. JE, That's fine. It's yours. MO or Paypal? In the meantime, I will look and see about the lowers. Thanks, Steve __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

06-22-2009, 12:53 PM	#38
steinepstein Senior Member Join Date: Nov 2003 Location: Chicago, IL Posts: 374	Re: Parting out 71 LWB GMC Paypal, I'll PM you. JE

06-22-2009, 02:37 PM	#39
smith2481 Registered User Join Date: May 2008 Location: Millwood, WV Posts: 119	Re: Parting out 71 LWB GMC how about the heater and fan controller good shape and how much shipped

06-22-2009, 03:27 PM	#40
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Parting out 71 LWB GMC smith2481 Re: Parting out 71 LWB GMC how about the heater and fan controller good shape and how much shipped It has a broken center arm. Chrome is in decent shape and overall looks pretty good. Let me know if you are still interested and I will get you some pics. Thanks for looking, Steve __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!



Register or Log In To remove these advertisements.

06-23-2009, 09:17 AM	#41
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Parting out 71 LWB GMC steinepstein IRT Radiator shipment. Hi Jon, I shipped your radiator today USPS and you should have it in about 7 days. It's insured so if there are any problems with the shipping let me know. I really appreciate your business and I have included the rubber radiator pads free of charge as a thank you. Steve __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

07-08-2009, 04:18 PM	#42
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: Parting out 71 LWB GMC Still available? Intrested in both front fenders and drivers side bedside. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

07-08-2009, 05:15 PM	#43
mrhino Account Suspended Join Date: Aug 2007 Location: USA Posts: 1,223	Re: Parting out 71 LWB GMC id be interested in the drivers side far rear lower trim molding if still available, also both door locks and key and maybe the heater box. thanks mike

07-09-2009, 07:55 PM	#44
markster5 Registered User Join Date: Jan 2009 Location: stuart florida Posts: 59	Re: Parting out 71 LWB GMC where is sanderson ?wondering how long hf drive it would to pick ir up ?

07-09-2009, 08:55 PM	#45
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: Parting out 71 LWB GMC Interested in the seat belts if they are black and also the brake booster/master cyl assembly. Price and shipping to Va. 22435. Thanks

07-09-2009, 10:04 PM	#46
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Parting out 71 LWB GMC If the instrument panel is still for sale, could i get a good pic of it. Shipping to 31904? Thanks ! __________________ Learning as I go! -------------------------------------

07-25-2009, 06:20 PM	#47
Grippo87 Registered User Join Date: Jun 2009 Location: Galway, NY Posts: 12	Re: Parting out 71 LWB GMC Would you be able to post some pics of the bed and a price? Thanks, Mike

07-27-2009, 07:16 AM	#48
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: Parting out 71 LWB GMC Brake booster assembly arrrived Friday in good shape, thanks. Roland

07-27-2009, 02:24 PM	#49
SevenOne Registered User Join Date: Sep 2007 Location: Tampa,Fl Posts: 82	Re: Parting out 71 LWB GMC Price/Condition on the bed?Thanx -james

07-27-2009, 04:59 PM	#50
markster5 Registered User Join Date: Jan 2009 Location: stuart florida Posts: 59	Re: Parting out 71 LWB GMC i'm still interested in hood if you still hav it. thanks Mark

Register or Log In To remove these advertisements.