"Made Bail" - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rustSpot · 07-23-2009, 03:01 AM

Quote:

Originally Posted by SCOTI

What size/brand tires?

Mickey Thompson Sportsman S/R.They're 29x18x20. The owner of the vette below says these are on his 20x12s.

rustSpot · 07-23-2009, 03:22 AM

While looking for a tire pic I came across these from 1993. When I started this build originally. My daily driver for two years was a 67 black swb lurking in the background of the first pic.

*1sik52* · 07-23-2009, 08:17 AM

Im putting 22x12s on my blazer, but cant seem to find a good tire to fit

ANTHONY67 · 07-23-2009, 09:01 AM

Man i seen your truck at scraping the cost love the wheels and stance .

rustSpot · 07-23-2009, 01:29 PM

Quote:

Originally Posted by ANTHONY67

Man i seen your truck at scraping the cost love the wheels and stance .

Thanks man!

Quote:

Originally Posted by 1sik52

Im putting 22x12s on my blazer, but cant seem to find a good tire to fit

Really all depends on how low profile you want to go. I've seen quite a few 22x12's rollin around. Saw three sets of 12's at Bills shop last I was there with tires mounted.

rustSpot · 07-30-2009, 10:27 PM

New rendering thanks to Darryl Tracy.

SCOTI · 07-30-2009, 11:50 PM

Nice. I need to get by there & check this bad boy out.

vsoree · 08-08-2009, 02:19 PM

I guess I better give you back the picture I stole from you at Bill shop

Painter D · 08-09-2009, 10:37 AM

That rendering is sweet, I'm diggin the green.

rustSpot · 08-10-2009, 12:25 AM

Quote:

Originally Posted by vsoree

I guess I better give you back the picture I stole from you at Bill shop

Nice! That was the morning headed to TexMex I think!

rustSpot · 08-10-2009, 12:27 AM

Quote:

Originally Posted by 69chevyshort

That rendering is sweet, I'm diggin the green.

Thanks man! Wasnt sure what reaction I would get to the green.

**youngrodder** · 08-10-2009, 12:16 PM

Quote:

Originally Posted by rustSpot

Thanks man! Wasnt sure what reaction I would get to the green.

I went with a green/black combo on my 48 Chevy. I love the wheels. What are the specs on the tires? Your original post stated 265 x 35 front and 295 x25 rear. If that is for a 22" wheel, the front wheel diameter would be larger then the rear. I tried looking up the wheel on the B.A.D. site but they are not listed. Is it a one off design? I was hoping could make me a set? Just curious.

Looking good.
Marc

rustSpot · 08-10-2009, 01:16 PM

Thanks! Had to change that! It's actually 265/30 and 295/25. The fronts are a little less then 1/2 of an inch taller. Not really noticeable unless your looking for it. The wheels are called Sandovals. He's made my set, a set for a chopper and a solid powdercoated grey set for a newer 300. They're made per order. He'll make you a set. They'd look sik on your truck. Send me a link to your build I can't find it.

**youngrodder** · 08-10-2009, 02:46 PM

Quote:

Originally Posted by rustSpot

Thanks! Had to change that! It's actually 265/30 and 295/25. The fronts are a little less then 1/2 of an inch taller. Not really noticeable unless your looking for it. The wheels are called Sandovals. He's made my set, a set for a chopper and a solid powdercoated grey set for a newer 300. They're made per order. He'll make you a set. They'd look sik on your truck. Send me a link to your build I can't find it.

Thanks for the great info.

I did send an e-mail to their general box asking about building me some. Do you have a direct e-mail for someone there. There is a reason you can't find my build thread.........its a secret..JK. I will PM you some pics.

Thanks again
Marc

LOW DOUGH · 08-10-2009, 03:11 PM

love your truck rustSpot

rustSpot · 08-10-2009, 05:16 PM

Quote:

Originally Posted by youngrodder

Thanks for the great info.

I did send an e-mail to their general box asking about building me some. Do you have a direct e-mail for someone there. There is a reason you can't find my build thread.........its a secret..JK. I will PM you some pics.

Thanks again
Marc

Send me some pics for sure. therustspot@yahoo.com as for a email address for Jason I dont have. I just call the main number which is 918-836-6030.

rustSpot · 08-10-2009, 05:17 PM

Quote:

Originally Posted by LOW DOUGH

love your truck rustSpot

Thanks Low Dough!

**youngrodder** · 08-10-2009, 09:33 PM

Quote:

Originally Posted by rustSpot

Send me some pics for sure. therustspot@yahoo.com as for a email address for Jason I dont have. I just call the main number which is 918-836-6030.

E-mail sent. Thanks, I will give them a call.

Marc

nuke1 · 08-10-2009, 10:23 PM

your truck is turning out sick, i love the rendering that thing will stand out by all means. great job so far.

454inthehood · 08-10-2009, 11:27 PM

awsome build, love those wheels

rustSpot · 08-11-2009, 02:57 AM

Quote:

Originally Posted by youngrodder

E-mail sent. Thanks, I will give them a call.

Marc

Thanks for the pics man! I'll have to open a photobucket account tomorrow I guess. lol

rustSpot · 08-11-2009, 02:58 AM

Quote:

Originally Posted by nuke1

your truck is turning out sick, i love the rendering that thing will stand out by all means. great job so far.

Thanks man! I really appreciate that!

rustSpot · 08-11-2009, 02:59 AM

Quote:

Originally Posted by 454inthehood

awsome build, love those wheels

Thanks man! I apprecaite it....the wheels fully make this truck!

RED65 · 08-13-2009, 06:35 PM

love this truck. the wheels are very cool. hurry and finish it can't wait to see

rustSpot · 08-13-2009, 11:59 PM

Quote:

Originally Posted by RED65

love this truck. the wheels are very cool. hurry and finish it can't wait to see

Thanks man! Im tryin! Lack of funds is the only hold up, everything else is in place.

07-23-2009, 03:22 AM	#27
rustSpot NO REGRETS Join Date: Oct 2006 Location: Rockwall, Texas Posts: 498	Re: "Made Bail" While looking for a tire pic I came across these from 1993. When I started this build originally. My daily driver for two years was a 67 black swb lurking in the background of the first pic. Attached Images Last edited by rustSpot; 07-23-2009 at 03:22 AM.

07-23-2009, 08:17 AM	#28
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: "Made Bail" Im putting 22x12s on my blazer, but cant seem to find a good tire to fit

07-23-2009, 09:01 AM	#29
ANTHONY67 Registered User Join Date: Nov 2008 Location: FOREST MS Posts: 92	Re: "Made Bail" Man i seen your truck at scraping the cost love the wheels and stance .

07-30-2009, 10:27 PM	#31
rustSpot NO REGRETS Join Date: Oct 2006 Location: Rockwall, Texas Posts: 498	Re: "Made Bail" New rendering thanks to Darryl Tracy. Attached Images Last edited by rustSpot; 07-30-2009 at 10:28 PM.

07-30-2009, 11:50 PM	#32
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,951	Re: "Made Bail" Nice. I need to get by there & check this bad boy out. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

08-08-2009, 02:19 PM	#33
vsoree Registered User Join Date: Jun 2009 Location: Houston/ Boston Posts: 83	Re: "Made Bail" I guess I better give you back the picture I stole from you at Bill shop __________________ Stay blessed not Stressed!

08-09-2009, 10:37 AM	#34
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Re: "Made Bail" That rendering is sweet, I'm diggin the green. __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5

08-10-2009, 01:16 PM	#38
rustSpot NO REGRETS Join Date: Oct 2006 Location: Rockwall, Texas Posts: 498	Re: "Made Bail" Thanks! Had to change that! It's actually 265/30 and 295/25. The fronts are a little less then 1/2 of an inch taller. Not really noticeable unless your looking for it. The wheels are called Sandovals. He's made my set, a set for a chopper and a solid powdercoated grey set for a newer 300. They're made per order. He'll make you a set. They'd look sik on your truck. Send me a link to your build I can't find it. Last edited by rustSpot; 08-10-2009 at 01:19 PM.

08-10-2009, 03:11 PM	#40
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: "Made Bail" love your truck rustSpot

08-10-2009, 10:23 PM	#44
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: "Made Bail" your truck is turning out sick, i love the rendering that thing will stand out by all means. great job so far. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

08-10-2009, 11:27 PM	#45
454inthehood Registered User Join Date: Dec 2008 Location: Poughkeepsie, NY Posts: 43	Re: "Made Bail" awsome build, love those wheels __________________ 67 c10 Stockfloor Bodydrop

08-13-2009, 06:35 PM	#49
RED65 Registered User Join Date: Feb 2009 Location: charlotte, nc Posts: 27	Re: "Made Bail" love this truck. the wheels are very cool. hurry and finish it can't wait to see



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.