Pic Request: Rally wheels on a dropped truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BCOWANWHEELS · 08-05-2009, 01:08 PM

gonline71 super good lookin truck. wish mine was that cherry......
bob

chuckmc8 · 08-05-2009, 04:30 PM

7" wide on fronts and 9" rears.

*Shane* · 08-05-2009, 05:54 PM

what size tires on those wheels chuckmc8?

PanelDeland · 08-05-2009, 06:50 PM

Quote:

Originally Posted by mikey531

I was thinking of painting mine darker, they look great on your truck PanelDeland. What brand of paint was it ?

It was Krylon Charcoal(or dark grey) Mettalic from Wally world with a matching Krylon clear.I spent a couple hours cleaning with a wire wheel,scotch brite and foam sanding block.Then I went to town at the carwash with a degreaser and paid close attention to the seams where the center meets the hoop.I let them dry a day in the garage and an hour or so of sun to bring them to temp.I also set the can of paint in warm water for about 5 min before spraying.I used three coats on each wheel and then waited a couple days before spraying the clear.The directions on the can usually read either to recoat within x amount of time or wait at least 24 hours.
The prep is the key to getting the paint to stay.Degreasing 2-3 times is about the least I would try.Making sure they are dry and at the minimum temp for the paint is also important.
There's no magic to it just lots of grunt work prepping the wheels and some time.I do recommend lighter coats that just cover well since they seem to dry well and don't run.Don't get in a hurry to get the paint on all at once.
All of this is info I learned from hanging out here on the BB.Many don't like rattle can paint and if you don't take the same care with it that you would with a pro spray system then you will get crappy results.I have rattle canned these wheels and the interior of my truck.Both came out well and have lasted well.They wont win any shows but they sure look better than before.And to be honest you really can't tell that the wheels were rattle canned.

chuckmc8 · 08-05-2009, 07:57 PM

Quote:

Originally Posted by Shane

what size tires on those wheels chuckmc8?

235/70 on front, 255/70 on rear

Blitz · 08-05-2009, 08:13 PM

Quote:

Originally Posted by Dingfodgy

I'm totally down with prostreetc10- 'Vette style ralley's are much cleaner looking if you ask me!
Attachment 484779

I like this alot.

Quote:

Originally Posted by DZL1

Heres mine bagged on rallies.

DZL1.

As well as this.

Combine the two and it's REALLY nice.

fleetsidelarry · 11-15-2009, 03:52 PM

back to the top, one more post of rally wheels. this is Hd74's burb:

gmcdude · 11-15-2009, 03:57 PM

I like the ones like on a Corvette, but do they come in 20's ?

chevyboy55 · 11-15-2009, 05:13 PM

Here's mine

69GMCor70Chevy · 11-15-2009, 05:28 PM

Here is the best one's I have of mine....

Bpokey · 11-15-2009, 06:29 PM

Here is a 3/5 drop with 8 inch rallys and 275/60R15 tires all around.

big_al_71 · 11-15-2009, 09:30 PM

Here is mine with 4/6 drop with van rallies.......

white 67 · 11-15-2009, 11:00 PM

Heres mine with corvette rallys

miller6t9 · 11-15-2009, 11:28 PM

anybody got corvette rallys with disc brake centers?

nicolas72gmc · 11-16-2009, 01:02 AM

Here is mine with 8" rallies on all four corners and 235/70 on the front and 275/60 out back. Drop is 3.5/5

Tx Firefighter · 11-16-2009, 09:14 AM

5.5/6 drop 235/50 front 275/60 rear

4.5/6 drop 245/60 front 275/60 rear

72BlckButy · 11-16-2009, 09:17 AM

Kevin, that is one clean little stepper.

Tx Firefighter · 11-16-2009, 09:24 AM

I paid 1200 dollars for it out of the local newspaper in 2003. Drove it home. Didn't need a single rust repair. Floors, rockers, corners, all of it, dead solid.

You can't find them like that anymore for sure.

DZL1 · 11-16-2009, 09:27 AM

Heres an updated pic of mine. 8" rallies, 235/75/15, all around.

DZL1.

72BlckButy · 11-16-2009, 09:32 AM

Quote:

Originally Posted by Tx Firefighter

I paid 1200 dollars for it out of the local newspaper in 2003. Drove it home. Didn't need a single rust repair. Floors, rockers, corners, all of it, dead solid.

You can't find them like that anymore for sure.

IIRC you sold this truck right?

72BlckButy · 11-16-2009, 09:34 AM

Might as well post mine up as well... riding on 15x7 6-lug ralleys up front and 15x8 6-lug ralleys in the rear (235 75R15 on all four corners).

Name: DSCN5368.jpg
Views: 5863
Size: 50.1 KB

Name: DSCN5368.jpg
Views: 5863
Size: 50.1 KB

Name: DSCN5372.jpg
Views: 5782
Size: 45.0 KB

Name: DSCN5366.jpg
Views: 5732
Size: 43.3 KB

nicolas72gmc · 11-17-2009, 02:08 AM

Quote:

Originally Posted by DZL1

Heres an updated pic of mine. 8" rallies, 235/75/15, all around.

DZL1.

Those rallies set your truck off perfect. Forgive me if you posted it earlier, but how did you lower the front. I can't tuck my tires in front like yours. I think the drop spindles added a little width.

dakman · 11-17-2009, 08:58 AM

one of my fav's

DZL1 · 11-17-2009, 10:19 AM

Quote:

Originally Posted by nicolas72gmc

Those rallies set your truck off perfect. Forgive me if you posted it earlier, but how did you lower the front. I can't tuck my tires in front like yours. I think the drop spindles added a little width.

Thanks for the compliment! The front of the truck is bagged with dropped spindles and cut cups. The rear is bagged with c-notch and lowering blocks.

Cutting the cups in the front made a big difference in the way it sits. The pic is with truck aired out. Hope this helps.

DZL1.

LOW DOUGH · 11-17-2009, 11:48 AM

they all look good

08-05-2009, 01:08 PM	#26
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Pic Request: Rally wheels on a dropped truck gonline71 super good lookin truck. wish mine was that cherry...... bob __________________ I BELIEVE IN JOHN 3:16

08-05-2009, 04:30 PM	#27
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: Pic Request: Rally wheels on a dropped truck 7" wide on fronts and 9" rears. Attached Images

08-05-2009, 05:54 PM	#28
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Pic Request: Rally wheels on a dropped truck what size tires on those wheels chuckmc8?

11-15-2009, 03:52 PM	#32
fleetsidelarry Senior Car Nut Join Date: Jan 2008 Location: shellman bluff, GA Posts: 1,411	Re: Pic Request: Rally wheels on a dropped truck back to the top, one more post of rally wheels. this is Hd74's burb: __________________ Larry Last edited by fleetsidelarry; 11-15-2009 at 10:04 PM.

11-15-2009, 03:57 PM	#33
gmcdude Registered User Join Date: Jul 2009 Location: Abingdon, Virginia Posts: 300	Re: Pic Request: Rally wheels on a dropped truck I like the ones like on a Corvette, but do they come in 20's ?

11-15-2009, 05:13 PM	#34
chevyboy55 Senior Member Join Date: Aug 2004 Location: Kelso,Wa Posts: 3,637	Re: Pic Request: Rally wheels on a dropped truck Here's mine Attached Images __________________ Great minds think alike,So do ours

11-15-2009, 05:28 PM	#35
69GMCor70Chevy Registered User Join Date: Jul 2007 Location: Greenwater Lake, SK Posts: 175	Re: Pic Request: Rally wheels on a dropped truck Here is the best one's I have of mine.... Attached Images __________________ 68 Camaro - 327 Original Red on Red Car 69 GMC LWB - Built 350 a Blast To Drive 69 GMC LWB - "Green Machine" One Family Truck 70 Mercury Marauder - Future Project

11-15-2009, 06:29 PM	#36
Bpokey Registered User Join Date: Sep 2008 Location: Belle Chasse LA Posts: 147	Re: Pic Request: Rally wheels on a dropped truck Here is a 3/5 drop with 8 inch rallys and 275/60R15 tires all around. Attached Images

11-15-2009, 09:30 PM	#37
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Pic Request: Rally wheels on a dropped truck Here is mine with 4/6 drop with van rallies....... Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-15-2009, 11:00 PM	#38
white 67 Registered User Join Date: Oct 2009 Location: coupeville ,washington Posts: 348	Re: Pic Request: Rally wheels on a dropped truck Heres mine with corvette rallys Attached Images

11-15-2009, 11:28 PM	#39
miller6t9 Registered User Join Date: Aug 2009 Location: Rockingham, nc Posts: 166	Re: Pic Request: Rally wheels on a dropped truck anybody got corvette rallys with disc brake centers?

11-16-2009, 01:02 AM	#40
nicolas72gmc Registered User Join Date: Aug 2008 Location: Sunny Arizona Posts: 525	Re: Pic Request: Rally wheels on a dropped truck Here is mine with 8" rallies on all four corners and 235/70 on the front and 275/60 out back. Drop is 3.5/5 Attached Images __________________ Nick "Everyone has a plan, 'till they get punched in the mouth".........Mike Tyson 1968, GMC, SWB, Project 1972, GMC, LWB, Daily Driver, 383, headers, 2.5"/3" exhaust, 200r4, 3.5/5 ECE components. 1972, C/10, LWB, 350 vortec, th350

11-16-2009, 09:14 AM	#41
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Pic Request: Rally wheels on a dropped truck 5.5/6 drop 235/50 front 275/60 rear 4.5/6 drop 245/60 front 275/60 rear __________________ I'm on the Instagram- @Gearhead_Kevin

11-16-2009, 09:17 AM	#42
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Pic Request: Rally wheels on a dropped truck Kevin, that is one clean little stepper. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-16-2009, 09:24 AM	#43
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Pic Request: Rally wheels on a dropped truck I paid 1200 dollars for it out of the local newspaper in 2003. Drove it home. Didn't need a single rust repair. Floors, rockers, corners, all of it, dead solid. You can't find them like that anymore for sure. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

11-16-2009, 09:27 AM	#44
DZL1 One day..... Join Date: Aug 2008 Location: Ocala, FL. Posts: 702	Re: Pic Request: Rally wheels on a dropped truck Heres an updated pic of mine. 8" rallies, 235/75/15, all around. DZL1. Attached Images

11-16-2009, 09:34 AM	#46
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Pic Request: Rally wheels on a dropped truck Might as well post mine up as well... riding on 15x7 6-lug ralleys up front and 15x8 6-lug ralleys in the rear (235 75R15 on all four corners). __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-17-2009, 08:58 AM	#48
dakman Registered User Join Date: Jun 2008 Location: Ontario Canada Posts: 139	Re: Pic Request: Rally wheels on a dropped truck one of my fav's Attached Images

11-17-2009, 11:48 AM	#50
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Pic Request: Rally wheels on a dropped truck they all look good

Register or Log In To remove these advertisements.