CA Parting out 72 custom 10 longbed - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jd4300fel · 10-14-2009, 03:01 PM

Ray

if you could figure out the gear ratio i would defiantly be interested i can come pick it up so that would not be a problem

johnechi · 10-14-2009, 03:03 PM

I'll take it, pm sent.

KrazyRay · 10-14-2009, 03:40 PM

Quote:

Originally Posted by jd4300fel

Ray

if you could figure out the gear ratio i would defiantly be interested i can come pick it up so that would not be a problem

It appears to be 3.07 posi. pm sent

roadking-111 · 10-15-2009, 08:19 PM

next in line for power steering box. ship to 80550

KrazyRay · 10-16-2009, 09:52 AM

Quote:

Originally Posted by roadking-111

next in line for power steering box. ship to 80550

The shipping is going to be around $20 unless I can fit it into a flat rate box which would be $14. You are first in line for the box. Thanks, Ray

stynchrr · 10-16-2009, 11:44 AM

I will take the carb and bracket. Could you PM with payment info.
Tim

KrazyRay · 10-16-2009, 05:20 PM

Quote:

Originally Posted by stynchrr

I will take the carb and bracket. Could you PM with payment info.
Tim

pm sent

KrazyRay · 10-21-2009, 11:57 AM

5 lug front disc brakes and suspension complete $50 no shipping
72 front bumper brackets (all) $20 plus shipping

jd4300fel · 10-21-2009, 01:11 PM

Ray do you have a rear axle with the same lug pattern ? as the above picture 3.73 or similar gear ratio.

Mike

Liron72Blazer · 10-21-2009, 04:41 PM

Ray, Is the front bumper still around what is condition looks painted can it be restored? In Lodi will pick up.

KrazyRay · 10-21-2009, 08:23 PM

Quote:

Originally Posted by Liron72Blazer

Ray, Is the front bumper still around what is condition looks painted can it be restored? In Lodi will pick up.

The bumper overall from side to side looks relatively straight, but it has some issues toward the center where someone hooked a chain on it. I was going to scrap it but if you want it $5 LMK
Thanks, Ray

KrazyRay · 10-21-2009, 08:28 PM

Quote:

Originally Posted by jd4300fel

Ray do you have a rear axle with the same lug pattern ? as the above picture 3.73 or similar gear ratio.

Mike

The one on that truck was a 3.07 posi but I sold it local to a guy with the same rear end as yours...4.11. I'll keep looking, I might have a leaf spring rear end out of a 76 but I have to check the ratio. Thanks, Ray

sleepertruck72 · 10-21-2009, 11:06 PM

How much for the alternator bracket shipped to 95380 ? Thanks

KrazyRay · 10-21-2009, 11:36 PM

Quote:

Originally Posted by sleepertruck72

How much for the alternator bracket shipped to 95380 ? Thanks

I can do $15 shipped for the alt. brackets. Thanks, Ray

sleepertruck72 · 10-22-2009, 03:16 PM

Quote:

Originally Posted by KrazyRay

I can do $15 shipped for the alt. brackets. Thanks, Ray

I'll take them, pm me your payment info. Thanks

KrazyRay · 10-22-2009, 04:47 PM

Quote:

Originally Posted by sleepertruck72

I'll take them, pm me your payment info. Thanks

pm sent

sleepertruck72 · 10-31-2009, 03:10 PM

Ray,
Got the brackets today

Thanks
BTT for you

My F4i · 11-21-2009, 06:40 PM

do you have any of the rear wiring?

KrazyRay · 11-21-2009, 07:56 PM

Quote:

Originally Posted by My F4i

do you have any of the rear wiring?

Sorry, that went with the bed. Thanks, Ray

nicke · 11-22-2009, 12:41 AM

What condition are the black visors in? Do you have any clear pics you could post?
You dont happen to have any black door panels do you?

Thanks

screamin_c10 · 11-22-2009, 06:17 PM

Total price for the front bumper brackets to 97051?

KrazyRay · 11-22-2009, 10:48 PM

Quote:

Originally Posted by nicke

What condition are the black visors in? Do you have any clear pics you could post?
You dont happen to have any black door panels do you?

Thanks

The black visors are in good condition. Sorry, the P.O. carved speaker holes in the door panels. Thanks, Ray

KrazyRay · 11-22-2009, 10:51 PM

Quote:

Originally Posted by screamin_c10

Total price for the front bumper brackets to 97051?

The bumper brackets to 97051 would be $30 shipped. Thanks, Ray

screamin_c10 · 11-23-2009, 04:13 AM

I'll take them, PM me your payment info

Thanks

hotrod 80 · 11-23-2009, 06:28 AM

Sign me up for the booster , prop valve , mater and brackets $40 . pending shipping to 77521 .

10-14-2009, 03:01 PM	#26
jd4300fel Registered User Join Date: Aug 2002 Location: wheatland, Ca Posts: 427	Re: Parting out 72 custom 10 longbed Ray if you could figure out the gear ratio i would defiantly be interested i can come pick it up so that would not be a problem __________________ Mike K Friend of Bill W

10-14-2009, 03:03 PM	#27
johnechi Registered User Join Date: Jun 2009 Location: Hesperia, CA Posts: 159	Re: Parting out 72 custom 10 longbed I'll take it, pm sent.

10-15-2009, 08:19 PM	#29
roadking-111 Registered User Join Date: Feb 2006 Location: Windsor, CO Posts: 67	Re: Parting out 72 custom 10 longbed next in line for power steering box. ship to 80550

10-16-2009, 11:44 AM	#31
stynchrr Registered User Join Date: Oct 2005 Location: Dover Delaware Posts: 270	Re: Parting out 72 custom 10 longbed I will take the carb and bracket. Could you PM with payment info. Tim

10-21-2009, 11:57 AM	#33
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 72 custom 10 longbed 5 lug front disc brakes and suspension complete $50 no shipping 72 front bumper brackets (all) $20 plus shipping Attached Images

10-21-2009, 01:11 PM	#34
jd4300fel Registered User Join Date: Aug 2002 Location: wheatland, Ca Posts: 427	Re: Parting out 72 custom 10 longbed Ray do you have a rear axle with the same lug pattern ? as the above picture 3.73 or similar gear ratio. Mike __________________ Mike K Friend of Bill W

10-21-2009, 04:41 PM	#35
Liron72Blazer Registered User Join Date: Aug 2009 Location: Lodi, Ca Posts: 18	Re: Parting out 72 custom 10 longbed Ray, Is the front bumper still around what is condition looks painted can it be restored? In Lodi will pick up.

10-21-2009, 11:06 PM	#38
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: Parting out 72 custom 10 longbed How much for the alternator bracket shipped to 95380 ? Thanks __________________ 72 C20 Longbed 05 1500 Z71

10-31-2009, 03:10 PM	#42
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: Parting out 72 custom 10 longbed Ray, Got the brackets today Thanks BTT for you __________________ 72 C20 Longbed 05 1500 Z71

11-21-2009, 06:40 PM	#43
My F4i Registered User Join Date: May 2009 Location: Texas Posts: 28	Re: Parting out 72 custom 10 longbed do you have any of the rear wiring?

11-22-2009, 12:41 AM	#45
nicke Registered User Join Date: Aug 2009 Location: Spokane, WA Posts: 503	Re: Parting out 72 custom 10 longbed What condition are the black visors in? Do you have any clear pics you could post? You dont happen to have any black door panels do you? Thanks

11-22-2009, 06:17 PM	#46
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: Parting out 72 custom 10 longbed Total price for the front bumper brackets to 97051? __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY!

11-23-2009, 04:13 AM	#49
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: Parting out 72 custom 10 longbed I'll take them, PM me your payment info Thanks __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY!

11-23-2009, 06:28 AM	#50
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Parting out 72 custom 10 longbed Sign me up for the booster , prop valve , mater and brackets $40 . pending shipping to 77521 . __________________ 1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.