My 93 CCSSB - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIGphillip79 · 10-30-2009, 08:52 PM

Is that a ford I see your driveway in one of your pics. Blaspheme!

*highperf4x4* · 10-30-2009, 09:14 PM

I can't believe you found the truck I need for work and now you're going to chop it up!!!!

They had a red one down the street from me at a car lot that is almost identical to this one including the 454 and tranny but it was gone before I could stop and ask about it. I'm sure they wanted too much for it though.

*highperf4x4* · 10-30-2009, 09:16 PM

Quote:

Originally Posted by joe231

Stepside???

Tell Travis he can have it for $4500

Heck if I had 4500 my '72 would be done. However, you can come over here and suck my big toe for 4.50 ...........

**scotts62** · 10-30-2009, 10:02 PM

Quote:

Originally Posted by BIGphillip79

Definately need to jack the seats out of a burb, with all that back seat no need for a bench up front. Make it a 2+2, That'd be nice.

Yeah thats what i was thinking about too, going to check around and see what i can find.

Quote:

Originally Posted by BIGphillip79

Is that a ford I see your driveway in one of your pics. Blaspheme!

Yeah yeah i know.. i got enough flack for that at the OK meet

Quote:

Originally Posted by highperf4x4

I can't believe you found the truck I need for work and now you're going to chop it up!!!!

sorry there homie

Quote:

Originally Posted by highperf4x4

Heck if I had 4500 my '72 would be done. However, you can come over here and suck my big toe for 4.50 ...........

*highperf4x4* · 10-30-2009, 10:37 PM

Well just make it look good brother!!

**scotts62** · 10-30-2009, 10:42 PM

Quote:

Originally Posted by highperf4x4

Well just make it look good brother!!

Will do

might be a bit though, would like to find a 5 lug setup or another parts truck, what sucks is that i just threw that one away and it had all good 5 lug front end parts

oh well

*highperf4x4* · 10-30-2009, 10:57 PM

Yeah that's a bummer. I know a guy that would have used the bed too!

joe231 · 10-30-2009, 11:43 PM

Quote:

Originally Posted by highperf4x4

Heck if I had 4500 my '72 would be done. However, you can come over here and suck my big toe for 4.50 ...........

it will cost ya way more than that

Quote:

Originally Posted by highperf4x4

Yeah that's a bummer. I know a guy that would have used the bed too!

well heck, he has another long bed to get rid of now....what do you need it for? The 4X4?

*highperf4x4* · 10-31-2009, 01:18 AM

Yeah, I have some damage on both sides of mine. You gonna make me a fancy bed lift?

joe231 · 10-31-2009, 01:24 AM

make it dump, or lift stuff into the bed? or to lift the bed off and set it back on?

*highperf4x4* · 10-31-2009, 01:35 AM

A lift for the bed swap, and allow me to change my fuel sending unit while we're at it!

joe231 · 10-31-2009, 01:43 AM

I just used 2 ratchet straps diagonal forming a X in the middle and I hooked a engine picker to the middle of the X...but with a long bed the picker might be too short to reach.....

**scotts62** · 10-31-2009, 07:42 AM

Quote:

Originally Posted by highperf4x4

Yeah, I have some damage on both sides of mine. You gonna make me a fancy bed lift?

This one is in pretty good shape, not as good as the first one but it definitely usable. I even know a guy that could paint it to match

TimE · 10-31-2009, 02:32 PM

SCORE!!!

Since you've got so much going on now, when should I drop by and pick up the '62?

**scotts62** · 10-31-2009, 02:53 PM

Quote:

Originally Posted by TimE

SCORE!!!

Since you've got so much going on now, when should I drop by and pick up the '62?

The other are for sale before that bad boy

TimE · 11-01-2009, 10:20 PM

At least you've got your priorities right!!

The crew will make a cool family cruiser though.

**scotts62** · 11-01-2009, 10:23 PM

Quote:

Originally Posted by TimE

At least you've got your priorities right!!

The crew will make a cool family cruiser though.

Yeah thats the idea, its cheaper than 35K for a new one, it would be nice to have though

bjcaldwe · 11-04-2009, 05:44 PM

That crew cab will be sweet. I really have to meet up with some of you guys sometime.

*highperf4x4* · 11-05-2009, 01:33 AM

Quote:

Originally Posted by scotts62

This one is in pretty good shape, not as good as the first one but it definitely usable. I even know a guy that could paint it to match

When you say "pretty good shape" is that better than mine or?.............

**scotts62** · 11-05-2009, 08:48 AM

Quote:

Originally Posted by highperf4x4

When you say "pretty good shape" is that better than mine or?.............

Haha well im not sure of what shape yours is in so i cant compare the two

The sides are straight, mo major caved in dents.

fiddy9apache · 11-14-2009, 06:54 PM

you still coming down on the 21st for the parts?

**scotts62** · 11-14-2009, 06:57 PM

Quote:

Originally Posted by fiddy9apache

you still coming down on the 21st for the parts?

Yeah i was just about to call you about that,

Be tomorrow actually.

Jeep & GMC · 11-16-2009, 10:59 PM

If you do a step side bed you have to put on a roll pan and shave the rear steps. Or keep your bed and make it a dually. Gotta love long and low, and you already don't care about parking.

**scotts62** · 11-16-2009, 11:04 PM

Quote:

Originally Posted by Jeep & GMC

If you do a step side bed you have to put on a roll pan and shave the rear steps. Or keep your bed and make it a dually. Gotta love long and low, and you already don't care about parking.

Na going short wide with it, seems everyone around here thinks that their beds are worth the price of gold even needing body work... Nope if i was worried about parking i would walk

*highperf4x4* · 11-17-2009, 12:13 AM

Scott, if you have a long bed then you have a short bed brother........ It's like whittlin, it's in there, you just have to carve it out man.

10-30-2009, 08:52 PM	#26
BIGphillip79 Registered User Join Date: Oct 2009 Location: McAllen TX Posts: 377	Re: My 93 Crewcab Build Is that a ford I see your driveway in one of your pics. Blaspheme!

10-30-2009, 09:14 PM	#27
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: My 93 Crewcab Build I can't believe you found the truck I need for work and now you're going to chop it up!!!! They had a red one down the street from me at a car lot that is almost identical to this one including the 454 and tranny but it was gone before I could stop and ask about it. I'm sure they wanted too much for it though.

10-30-2009, 10:37 PM	#30
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: My 93 Crewcab Build Well just make it look good brother!!

10-30-2009, 10:57 PM	#32
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: My 93 Crewcab Build Yeah that's a bummer. I know a guy that would have used the bed too!

10-31-2009, 01:18 AM	#34
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: My 93 Crewcab Build Yeah, I have some damage on both sides of mine. You gonna make me a fancy bed lift?

10-31-2009, 01:24 AM	#35
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 93 Crewcab Build make it dump, or lift stuff into the bed? or to lift the bed off and set it back on? __________________ *CHEVY ONLY* Last edited by joe231; 10-31-2009 at 01:25 AM.

10-31-2009, 01:35 AM	#36
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: My 93 Crewcab Build A lift for the bed swap, and allow me to change my fuel sending unit while we're at it!

10-31-2009, 01:43 AM	#37
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 93 Crewcab Build I just used 2 ratchet straps diagonal forming a X in the middle and I hooked a engine picker to the middle of the X...but with a long bed the picker might be too short to reach..... __________________ *CHEVY ONLY*

10-31-2009, 02:32 PM	#39
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: My 93 Crewcab Build SCORE!!! Since you've got so much going on now, when should I drop by and pick up the '62? __________________ Just hopin' I live long enough to finish something!!!

11-01-2009, 10:20 PM	#41
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: My 93 Crewcab Build At least you've got your priorities right!! The crew will make a cool family cruiser though. __________________ Just hopin' I live long enough to finish something!!!

11-04-2009, 05:44 PM	#43
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: My 93 Crewcab Build That crew cab will be sweet. I really have to meet up with some of you guys sometime.

11-14-2009, 06:54 PM	#46
fiddy9apache Registered User Join Date: Aug 2009 Location: ftw tex Posts: 682	Re: My 93 Crewcab Build you still coming down on the 21st for the parts?

11-16-2009, 10:59 PM	#48
Jeep & GMC Registered User Join Date: Aug 2007 Location: Montrose,CO Posts: 172	Re: My 93 Crewcab Build If you do a step side bed you have to put on a roll pan and shave the rear steps. Or keep your bed and make it a dually. Gotta love long and low, and you already don't care about parking. __________________ '97 Chevy z71 starline westerner conversion partially removed.

11-17-2009, 12:13 AM	#50
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: My 93 Crewcab Build Scott, if you have a long bed then you have a short bed brother........ It's like whittlin, it's in there, you just have to carve it out man.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.