LA Leftovers for sale - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

swyfor5 · 12-06-2009, 01:17 AM

Looking at the bowtie. Interested if still available. Seen a few aftermarket ties, and looking for a NOS, or real good after/market one.

HuggerCST · 12-06-2009, 01:22 AM

Thanks, but Mcbassin is taking the bowtie.

**ScottH** · 12-06-2009, 11:22 AM

Can u tell me how tall the center caps are, and how far apart the screw holes are spaced?

thanks.

HuggerCST · 12-07-2009, 12:27 AM

They are 2 & 3/8" tall, and measuring across the screw holes, they are 3 & 5/8" center to center. The part # inside the caps is 3505203. The spacing between each screw hole is about 2 & 1/4", center to center.

HuggerCST · 12-07-2009, 12:37 AM

STP67-72- Everything that you are interested in is still available except for the driver side cab trim. I'll PM you.

Chevy4Life · 12-07-2009, 01:40 AM

Any rear window trim left? I'm looking for a nice set.
Thanks,
Jay

mcbassin · 12-07-2009, 08:57 AM

Wynn,
It might cost me too much but can you check shipping charge for the column to 74851 OK? Also, I guess it would work in a 69 model? thanks,
Mike

HuggerCST · 12-07-2009, 10:41 AM

Quote:

Originally Posted by Chevy4Life

Any rear window trim left? I'm looking for a nice set.
Thanks,
Jay

I do have some, but I don't have a good lower piece. All of mine have at least one dent.

Quote:

Originally Posted by mcbassin

Wynn,
It might cost me too much but can you check shipping charge for the column to 74851 OK? Also, I guess it would work in a 69 model? thanks,
Mike

Guessing at the size and weight, it looks like 17-18 dollars. I can measure and weigh it tonight if you are interested. Thanks

mcbassin · 12-07-2009, 12:01 PM

Quote:

Originally Posted by HuggerCST

Guessing at the size and weight, it looks like 17-18 dollars. I can measure and weigh it tonight if you are interested. Thanks

Yea, if you don't mind get an accurate quote. thanks,
Mike

FOREVER71 · 12-08-2009, 09:27 PM

money order sent for driver side cab moulding....jeremy

**STP67-72** · 12-08-2009, 11:27 PM

Hey Wynne
What is the total on the items i asked about. Column also,if still available. No hurry. Let me know.
Thanks Steve

HuggerCST · 12-09-2009, 12:41 AM

Quote:

Originally Posted by STP67-72

Hey Wynne
What is the total on the items i asked about. Column also,if still available. No hurry. Let me know.
Thanks Steve

$50 for the 3 pieces of trim Steve. I'm not sure if the fender piece came with clips, but they are not there, so I knocked off $5. I have some used and new aftermarket clips if you want. The column hasn't been spoken for yet, $50 for it. Do you want me to ship, or bring this stuff to Pate? (If I don't get to Houston before then)

mcbassin · 12-09-2009, 08:26 PM

Wynne,
I got the Bowtie emblem today. It looks perfect! I haven't taken out of the bag yet but, quality looks good. Thanks for SUPER quick shipping and packaging! thanks,
Mike

HuggerCST · 12-09-2009, 11:24 PM

Isn't that the way it's supposed to be?

Thanks!

ksbeatty · 01-05-2010, 04:35 PM

saddle door escutcheons (set)- $8 shipped

Are these still available?

HuggerCST · 01-05-2010, 05:29 PM

Yes, still available.

ksbeatty · 01-05-2010, 10:13 PM

Please PM me payment information. I'll take them.

darkhorse970 · 01-06-2010, 06:22 AM

Wynne, if you've still got those center caps I'd like to take a look. I need at least two.

ksbeatty · 01-06-2010, 09:19 AM

Payment sent

HuggerCST · 01-06-2010, 10:42 AM

Quote:

Originally Posted by darkhorse970

Wynne, if you've still got those center caps I'd like to take a look. I need at least two.

Yes I still have them Keith.

ksbeatty · 01-08-2010, 10:22 PM

just wanted to check and make sure you got my payment.

HuggerCST · 01-08-2010, 11:06 PM

Yes I did and it went out in wednesday's mail. Thanks

12-06-2009, 01:17 AM	#26
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Leftovers for sale Looking at the bowtie. Interested if still available. Seen a few aftermarket ties, and looking for a NOS, or real good after/market one.

12-06-2009, 01:22 AM	#27
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Leftovers for sale Thanks, but Mcbassin is taking the bowtie. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

12-06-2009, 11:22 AM	#28
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Leftovers for sale Can u tell me how tall the center caps are, and how far apart the screw holes are spaced? thanks. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 12-06-2009 at 11:50 AM.

12-07-2009, 12:27 AM	#29
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Leftovers for sale They are 2 & 3/8" tall, and measuring across the screw holes, they are 3 & 5/8" center to center. The part # inside the caps is 3505203. The spacing between each screw hole is about 2 & 1/4", center to center. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 12-07-2009 at 12:30 AM.

12-07-2009, 12:37 AM	#30
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Leftovers for sale STP67-72- Everything that you are interested in is still available except for the driver side cab trim. I'll PM you. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

12-07-2009, 01:40 AM	#31
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	Re: Leftovers for sale Any rear window trim left? I'm looking for a nice set. Thanks, Jay

12-07-2009, 08:57 AM	#32
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Leftovers for sale Wynn, It might cost me too much but can you check shipping charge for the column to 74851 OK? Also, I guess it would work in a 69 model? thanks, Mike __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-08-2009, 09:27 PM	#35
FOREVER71 Registered User Join Date: May 2008 Location: PORTLAND,ORGON Posts: 585	Re: Leftovers for sale money order sent for driver side cab moulding....jeremy

12-08-2009, 11:27 PM	#36
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,668	Re: Leftovers for sale Hey Wynne What is the total on the items i asked about. Column also,if still available. No hurry. Let me know. Thanks Steve __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

12-09-2009, 08:26 PM	#38
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Leftovers for sale Wynne, I got the Bowtie emblem today. It looks perfect! I haven't taken out of the bag yet but, quality looks good. Thanks for SUPER quick shipping and packaging! thanks, Mike __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-09-2009, 11:24 PM	#39
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Leftovers for sale Isn't that the way it's supposed to be? Thanks! __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-05-2010, 04:35 PM	#40
ksbeatty Registered User Join Date: Mar 2006 Location: Kansas Posts: 300	Re: Leftovers for sale saddle door escutcheons (set)- $8 shipped Are these still available? __________________ 1969 GMC 3/4 Ton 4x4 2" Lift, A/C, PS, PB 383 Stroker, 700R4, 205, 4.10 GM Medium Bronze (Copper Poly) no new nick name yet. She is to pretty to be the Beater. http://67-72chevytrucks.com/vboard/s...d.php?t=241855

01-05-2010, 05:29 PM	#41
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Leftovers for sale Yes, still available. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-05-2010, 10:13 PM	#42
ksbeatty Registered User Join Date: Mar 2006 Location: Kansas Posts: 300	Re: Leftovers for sale Please PM me payment information. I'll take them. __________________ 1969 GMC 3/4 Ton 4x4 2" Lift, A/C, PS, PB 383 Stroker, 700R4, 205, 4.10 GM Medium Bronze (Copper Poly) no new nick name yet. She is to pretty to be the Beater. http://67-72chevytrucks.com/vboard/s...d.php?t=241855

01-06-2010, 06:22 AM	#43
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,104	Re: Leftovers for sale Wynne, if you've still got those center caps I'd like to take a look. I need at least two. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941



Register or Log In To remove these advertisements.

01-06-2010, 09:19 AM	#44
ksbeatty Registered User Join Date: Mar 2006 Location: Kansas Posts: 300	Re: Leftovers for sale Payment sent __________________ 1969 GMC 3/4 Ton 4x4 2" Lift, A/C, PS, PB 383 Stroker, 700R4, 205, 4.10 GM Medium Bronze (Copper Poly) no new nick name yet. She is to pretty to be the Beater. http://67-72chevytrucks.com/vboard/s...d.php?t=241855

01-08-2010, 10:22 PM	#46
ksbeatty Registered User Join Date: Mar 2006 Location: Kansas Posts: 300	Re: Leftovers for sale just wanted to check and make sure you got my payment. __________________ 1969 GMC 3/4 Ton 4x4 2" Lift, A/C, PS, PB 383 Stroker, 700R4, 205, 4.10 GM Medium Bronze (Copper Poly) no new nick name yet. She is to pretty to be the Beater. http://67-72chevytrucks.com/vboard/s...d.php?t=241855

01-08-2010, 11:06 PM	#47
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Leftovers for sale Yes I did and it went out in wednesday's mail. Thanks __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

Register or Log In To remove these advertisements.