Its on its way!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

texasfunk · 01-13-2010, 10:45 PM

also where did you get the 2 link w/ wishbone kit?

jrsmith_2010 · 01-13-2010, 10:49 PM

yea ill talk to him about the front guys, but it looks really solid to me, ill get a better pic tomorrow, hes done the same to his rockclimbers, to raise them, and they r still holding strong

texasfunk, i plan on running 22s or 24s on it, when the bank balance gets back from recovery

3r!c84, i was planning on it, it does in the front but not so much in the rear, but the body will

fat hoe, what does BOA mean? im not 100% sure about it lol

Restrorob · 01-13-2010, 10:50 PM

Quote:

Originally Posted by jrsmith_2010

took of the heater box cuz it was hitting and i dont need it

Dude, Your treadin in snow and ice and you don't need a heater ?

And, Give some serious thought to plating the inside of that Z as everyone mentioned. We'd hate to see you have problems once it's all back together....

jrsmith_2010 · 01-13-2010, 10:54 PM

Quote:

Originally Posted by texasfunk

also where did you get the 2 link w/ wishbone kit?

i got it from SD.com

jrsmith_2010 · 01-13-2010, 10:55 PM

Quote:

Originally Posted by Restrorob

Dude, Your treadin in snow and ice and you don't need a heater ?

And, Give some serious thought to plating the inside of that Z as everyone mentioned. We'd hate to see you have problems once it's all back together....

haha well this wont be going anywhere near the ice and snow, just like my 79, so there will be no need for it, thats y i bought my 92

*Stitch* · 01-13-2010, 10:55 PM

Jr, BOA is bag over axle...meaning put the bag between the axle and the c notch...that should solve your laying frame problem in the rear...also, rockcrawlers don't usually drive on the road...yours will...

jrsmith_2010 · 01-13-2010, 10:57 PM

thats what i thought it ment. yea i kno that but he takes his on the trails and rolls them, and they still r all together

*Stitch* · 01-13-2010, 11:02 PM

well, 10 different people on here have told you it's unsafe...if you don't believe us, then you don't...if you don't get it fixed, I can say I'm glad you live in Kansas and not SC...I don't have to worry about you causing an accident around me and my family...

trixter99 · 01-13-2010, 11:06 PM

Quote:

Originally Posted by Fat Hoe

well, 10 different people on here have told you it's unsafe...if you don't believe us, then you don't...if you don't get it fixed, I can say I'm glad you live in Kansas and not SC...I don't have to worry about you causing an accident around me and my family...

Amen Brother.

jrsmith_2010 · 01-13-2010, 11:07 PM

im just saying dude, the pics r from the inside of it, where it just has the one brace, the outside has been reinforced with 1/4 plates where it isnt going anywhere if it wanted to

*Stitch* · 01-13-2010, 11:10 PM

the plate on the side of the frame is only going to keep the frame from flex to the side...the engine crossmember is already going to do that...if you don't gusset on top and bottom of where the z was made, it will flex up and you will be laying frame quit quickly...there's a reason everyone is telling you to put gussets on it and plate the inside, because it's what you need to do to make it safe...just take it back and tell him to do it...easy as that...

3r!c84 · 01-13-2010, 11:12 PM

Quote:

Originally Posted by Fat Hoe

well, 10 different people on here have told you it's unsafe...if you don't believe us, then you don't...if you don't get it fixed, I can say I'm glad you live in Kansas and not SC...I don't have to worry about you causing an accident around me and my family...

we are not trying to be mean in anyway,just saying this to keep you and everyone around you safe man.

jrsmith_2010 · 01-13-2010, 11:13 PM

yea thanks guys, i dont mean to be a stuck up d!ck but i just got it back today after a month of it being gone, and im pumped to put it all back together, ill call and see what he can do about it tomrrow

Restrorob · 01-13-2010, 11:17 PM

Also see if he'll move the bags over the axle in the notch so you won't have to chop your bed up trying to get it lower.

jrsmith_2010 · 01-13-2010, 11:20 PM

yea i thought it was self explanitory with the brackets but i guess not

*Stitch* · 01-13-2010, 11:20 PM

Quote:

Originally Posted by Restrorob

Also see if he'll move the bags over the axle in the notch so you won't have to chop your bed up trying to get it lower.

x2...Jr, I'm not trying to be a PIA...I just know that you want it done right and that's how it needs to be done to be right...I didn't say it before, but I would love to have bags on one of my trucks, but family priorities get in the way sometimes...lol...anyways, I know the truck is going to look good and congrats on getting it bagged and for such a good price...

jrsmith_2010 · 01-13-2010, 11:26 PM

haha yea dude thats y im doing the majority of my truck buliding career right now when i can before i get a family of my own haha

*BGRAFX* · 01-14-2010, 12:01 AM

What part of Kansas do you live? truck looks good man!

jrsmith_2010 · 01-14-2010, 12:03 AM

i live in mclouth, about 20 miles from lawrence. i seen what looked like ur burb on CL a few days back

*BGRAFX* · 01-14-2010, 12:06 AM

Yup the burb is going to a new family and i'm getting a 86 crewcab in it's place.

jrsmith_2010 · 01-14-2010, 12:30 AM

very nice, i love crew cab squares

01-13-2010, 10:45 PM	#26
texasfunk Registered User Join Date: Jun 2009 Location: Lubbock, TX Posts: 1,671	Re: Its on its way!! also where did you get the 2 link w/ wishbone kit? __________________ 2006 GMC Sierra CCSB, 6.0 swap 2000 Chevy C3500 Crew Cab shortbed dually 1999 Chevy c2500 Crew Cab shortbed 1982 El Camino 350/350 1979 K5 2wd blazer bagged/bodied 1986 Monte Carlo SS 1991 Chevy CK SWB-67 clip and tailgate, bagged 350/700r4 1955 Chevy Bel Air 2014 Chevy Silverado ccsb

01-13-2010, 10:49 PM	#27
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! yea ill talk to him about the front guys, but it looks really solid to me, ill get a better pic tomorrow, hes done the same to his rockclimbers, to raise them, and they r still holding strong texasfunk, i plan on running 22s or 24s on it, when the bank balance gets back from recovery 3r!c84, i was planning on it, it does in the front but not so much in the rear, but the body will fat hoe, what does BOA mean? im not 100% sure about it lol __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-13-2010, 10:55 PM	#31
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Its on its way!! Jr, BOA is bag over axle...meaning put the bag between the axle and the c notch...that should solve your laying frame problem in the rear...also, rockcrawlers don't usually drive on the road...yours will...

01-13-2010, 10:57 PM	#32
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! thats what i thought it ment. yea i kno that but he takes his on the trails and rolls them, and they still r all together __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-13-2010, 11:02 PM	#33
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Its on its way!! well, 10 different people on here have told you it's unsafe...if you don't believe us, then you don't...if you don't get it fixed, I can say I'm glad you live in Kansas and not SC...I don't have to worry about you causing an accident around me and my family...

01-13-2010, 11:07 PM	#35
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! im just saying dude, the pics r from the inside of it, where it just has the one brace, the outside has been reinforced with 1/4 plates where it isnt going anywhere if it wanted to __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-13-2010, 11:10 PM	#36
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Its on its way!! the plate on the side of the frame is only going to keep the frame from flex to the side...the engine crossmember is already going to do that...if you don't gusset on top and bottom of where the z was made, it will flex up and you will be laying frame quit quickly...there's a reason everyone is telling you to put gussets on it and plate the inside, because it's what you need to do to make it safe...just take it back and tell him to do it...easy as that...

01-13-2010, 11:13 PM	#38
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! yea thanks guys, i dont mean to be a stuck up d!ck but i just got it back today after a month of it being gone, and im pumped to put it all back together, ill call and see what he can do about it tomrrow __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-13-2010, 11:17 PM	#39
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: Its on its way!! Also see if he'll move the bags over the axle in the notch so you won't have to chop your bed up trying to get it lower. __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!* Last edited by Restrorob; 01-13-2010 at 11:18 PM.

01-13-2010, 11:20 PM	#40
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! yea i thought it was self explanitory with the brackets but i guess not __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-13-2010, 11:26 PM	#42
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! haha yea dude thats y im doing the majority of my truck buliding career right now when i can before i get a family of my own haha __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-14-2010, 12:01 AM	#43
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: Its on its way!! What part of Kansas do you live? truck looks good man!

01-14-2010, 12:03 AM	#44
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! i live in mclouth, about 20 miles from lawrence. i seen what looked like ur burb on CL a few days back __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-14-2010, 12:06 AM	#45
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: Its on its way!! Yup the burb is going to a new family and i'm getting a 86 crewcab in it's place.

01-14-2010, 12:30 AM	#46
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: Its on its way!! very nice, i love crew cab squares __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.