WY 1971 4x4 blazer parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HarleyT · 01-19-2010, 10:38 PM

How about seat belts, front and rears?
Thanks
HArley

*sharpie1972* · 01-19-2010, 10:47 PM

There are a few belts for both. None are great condition though. Sharpie

drunkbus · 01-19-2010, 10:48 PM

Quote:

Originally Posted by sharpie1972

Drunkbus: Only fuel tank parts so far are the ones pictured. Rear strip is there, but not in great shape. Sharpie

How bad is the rear strip? As long as it's fairly straight and solid I don't care about the chrome. I just need it to hold the seal in place. I could also use the two vertical pieces that hold the tailgate seal as well.

tjsblazer · 01-19-2010, 11:26 PM

Hey Dennis,
What about speaker parts brkts, grill, etc. Also oem Antenna assy (base, mast. wire)
What about front grill outer condition?
Thanks, Jeff.

*sharpie1972* · 01-19-2010, 11:27 PM

Drunkbus: I will get you some pics tomorrow. Sharpie

*sharpie1972* · 01-19-2010, 11:28 PM

Hi Jeff, nothing good speaker or antenna wise. Sharpie

tjsblazer · 01-19-2010, 11:31 PM

Quote:

Originally Posted by sharpie1972

Hi Jeff, nothing good speaker or antenna wise. Sharpie

Added to my request above. What about condition of front grill outer? Jeff.

*sharpie1972* · 01-19-2010, 11:37 PM

Hi Jeff, driver quality only. Thanks, Sharpie

**too much stuff** · 01-19-2010, 11:40 PM

Dennis, how about a 4x4 oil dipstick and tube? Eric

*sharpie1972* · 01-19-2010, 11:48 PM

Hi Eric, I will check for you tomorrow. There are several dipsticks and tubes, both engine and trans. All of the parts were bunched together and I'm just starting to go through them. Sharpie

badpeanut · 01-19-2010, 11:54 PM

Transfer case skid plate?

*sharpie1972* · 01-19-2010, 11:59 PM

Badpeanut: The second blazer has one but I won't have it home until this weekend. You get first shot. Sharpie

badpeanut · 01-20-2010, 12:01 AM

Quote:

Originally Posted by sharpie1972

Badpeanut: The second blazer has one but I won't have it home until this weekend. You get first shot. Sharpie

Sounds good! No rush.

daves71k5 · 01-20-2010, 01:41 AM

Sharpie' how about a factory roll bar for a Blazer? I didn't see one in the pictures of this Blazer but maybe in your second one? thanks Dave

**D.PASSMORE** · 01-20-2010, 07:19 AM

Quote:

Originally Posted by sharpie1972

I will let you know when I get the second blazer home and check it over. The drivers bedside on this one has previous bodywork. Sharpie

Sounds good, If the body damage isn't really bad (I can't really tell in the picture). Still very intrested in either one. Thanks

*sharpie1972* · 01-20-2010, 09:46 AM

Daves71k5: No roll bars. Sorry.
D.Passmore: The body damage on this one is pretty bad. I will let you know how the other looks. Sharpie

*sharpie1972* · 01-20-2010, 02:58 PM

Drunkbus: the rear strip is solid, it's pretty crusty on the center of the backside, but still sturdy. The side seal holders look good. UPS is probably going to kill us because of the length. I'll go $50 shipped and take the hit from them. Sharpie

drunkbus · 01-20-2010, 03:14 PM

Quote:

Originally Posted by sharpie1972

Drunkbus: the rear strip is solid, it's pretty crusty on the center of the backside, but still sturdy. The side seal holders look good. UPS is probably going to kill us because of the length. I'll go $50 shipped and take the hit from them. Sharpie

I'll take them. Send me payment info. I would check postal service for shipping. I was sent a dash cap and I don't think postage was too bad and it was probably just as long and a bigger piece. Thanks, Shaun

*sharpie1972* · 01-20-2010, 03:15 PM

Hi Shaun, PM sent. Sharpie

72 4x4 chevy · 01-21-2010, 12:41 AM

Do you have a front drive shaft?

68 C-10 Panel · 01-21-2010, 12:51 AM

Hey Sharpie is that an auto column ... I see the manual shifter on the floor but in one of the pics it looks like a shifter on the column as well. If so I may be interested in the column and the door skins. Thanks.

**tnblazerk5** · 01-21-2010, 01:30 AM

can i get better pics of the headers ? do they fit a 3/4 ton 4x4 with a auto th350 without getting in the way of the shifter or a 2wheel drive with a 327 in the 6banger spot ?

*sharpie1972* · 01-21-2010, 08:39 AM

72 4x4 Chevy: No front shaft
68 C10 panel: Yes it's an auto column. The floor shifter is for the transfer case. Not parting the doors at this time. $95 shipped on the column.
tnblazerk5: They should work fine on the 4x4 with smallblock and TH350. That was the setup in the Blazer and they fit fine and cleared the shifter. As far as the 2wd goes I'm not sure. Any areas or angles in particular you would like more pics of? Thanks, Sharpie

tjsblazer · 01-21-2010, 12:30 PM

are both of them auto or is the other a 4spd?

looking for some 4x4 4 spd parts, clutch, linkages, etc.

**lks dcvn** · 01-21-2010, 12:48 PM

I might be interested in the other rolling body [pending price, pix and condition].

Thx!

01-19-2010, 10:38 PM	#26
HarleyT Registered User Join Date: Dec 2007 Location: Memphis,Tn. Posts: 145	Re: 1971 4x4 blazer parts How about seat belts, front and rears? Thanks HArley

01-19-2010, 10:47 PM	#27
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts There are a few belts for both. None are great condition though. Sharpie

01-19-2010, 11:26 PM	#29
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: 1971 4x4 blazer parts Hey Dennis, What about speaker parts brkts, grill, etc. Also oem Antenna assy (base, mast. wire) What about front grill outer condition? Thanks, Jeff. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 Last edited by tjsblazer; 01-19-2010 at 11:28 PM. Reason: add request

01-19-2010, 11:27 PM	#30
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Drunkbus: I will get you some pics tomorrow. Sharpie

01-19-2010, 11:28 PM	#31
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Hi Jeff, nothing good speaker or antenna wise. Sharpie

01-19-2010, 11:37 PM	#33
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Hi Jeff, driver quality only. Thanks, Sharpie

01-19-2010, 11:40 PM	#34
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: 1971 4x4 blazer parts Dennis, how about a 4x4 oil dipstick and tube? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-19-2010, 11:48 PM	#35
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Hi Eric, I will check for you tomorrow. There are several dipsticks and tubes, both engine and trans. All of the parts were bunched together and I'm just starting to go through them. Sharpie

01-19-2010, 11:54 PM	#36
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	Re: 1971 4x4 blazer parts Transfer case skid plate? __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

01-19-2010, 11:59 PM	#37
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Badpeanut: The second blazer has one but I won't have it home until this weekend. You get first shot. Sharpie

01-20-2010, 01:41 AM	#39
daves71k5 Registered User Join Date: Jan 2002 Location: American Falls, Idaho-USA Posts: 318	Re: 1971 4x4 blazer parts Sharpie' how about a factory roll bar for a Blazer? I didn't see one in the pictures of this Blazer but maybe in your second one? thanks Dave

01-20-2010, 09:46 AM	#41
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Daves71k5: No roll bars. Sorry. D.Passmore: The body damage on this one is pretty bad. I will let you know how the other looks. Sharpie

01-20-2010, 02:58 PM	#42
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Drunkbus: the rear strip is solid, it's pretty crusty on the center of the backside, but still sturdy. The side seal holders look good. UPS is probably going to kill us because of the length. I'll go $50 shipped and take the hit from them. Sharpie Attached Images

01-20-2010, 03:15 PM	#44
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Hi Shaun, PM sent. Sharpie

01-21-2010, 12:41 AM	#45
72 4x4 chevy Registered User Join Date: Dec 2009 Location: Liberty, Ky Posts: 11	Re: 1971 4x4 blazer parts Do you have a front drive shaft?



Register or Log In To remove these advertisements.

01-21-2010, 12:51 AM	#46
68 C-10 Panel Registered User Join Date: Apr 2009 Location: MI Posts: 88	Re: 1971 4x4 blazer parts Hey Sharpie is that an auto column ... I see the manual shifter on the floor but in one of the pics it looks like a shifter on the column as well. If so I may be interested in the column and the door skins. Thanks. __________________ 68 C-10 Panel (fixing) 250-6,3ott 93 k1500 pickup DD "When a man is old enough to figure out his dad was right, he has a son who thinks he's wrong" Charles Wadsworth

01-21-2010, 01:30 AM	#47
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	Re: 1971 4x4 blazer parts can i get better pics of the headers ? do they fit a 3/4 ton 4x4 with a auto th350 without getting in the way of the shifter or a 2wheel drive with a 327 in the 6banger spot ?

01-21-2010, 08:39 AM	#48
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts 72 4x4 Chevy: No front shaft 68 C10 panel: Yes it's an auto column. The floor shifter is for the transfer case. Not parting the doors at this time. $95 shipped on the column. tnblazerk5: They should work fine on the 4x4 with smallblock and TH350. That was the setup in the Blazer and they fit fine and cleared the shifter. As far as the 2wd goes I'm not sure. Any areas or angles in particular you would like more pics of? Thanks, Sharpie

01-21-2010, 12:30 PM	#49
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: 1971 4x4 blazer parts are both of them auto or is the other a 4spd? looking for some 4x4 4 spd parts, clutch, linkages, etc. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 Last edited by tjsblazer; 01-21-2010 at 12:31 PM. Reason: add detail

01-21-2010, 12:48 PM	#50
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: 1971 4x4 blazer parts I might be interested in the other rolling body [pending price, pix and condition]. Thx!

Register or Log In To remove these advertisements.