Car wash find - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Duncan and son · 04-06-2010, 02:21 PM

Quote:

Originally Posted by Gene

Drivers side is a 1/2 ton and the pass. side is a 1 ton

good find there!

Yeah, the driver door and fender have been replaced.. good eye

**slomotion** · 04-06-2010, 02:36 PM

So, it's a 3/4 ton?

**special-K** · 04-06-2010, 09:06 PM

Quote:

Originally Posted by slomotion

So, it's a 3/4 ton?

A 1/2-azzed one ton.

my67chevytruck · 04-06-2010, 09:13 PM

Paul,
does it have the all-ilusive 7042218?

Duncan and son · 04-07-2010, 09:20 AM

Quote:

Originally Posted by my67chevytruck

Paul,
does it have the all-ilusive 7042218?

Heath, good Question. It has the correct original Qjet ( dont have no. in front of me) but this truck is a 402 4sd and the 7042218 is for a 402 with auto.

Mr-Jack · 04-07-2010, 10:01 AM

very slick looking find...good luck on the plans...that would be a tough one for me, but i probably wouldn't pass on it either.

seafoam is great been using it for years. the way i use it is take the vaccume line off the booster going to the intake manifold let it suck about 1/3 the can out the seafoam bottle while it's running and then pour it down til it stalls out the engine. Reconnect the vaccume line to the booster and dump the rest of the can in the crank case. then pour a full can in the tank and let it sit for about 15-20 minutes. after that...start it up and drive it. get on it as much as your vehicle can afford...should smoke like a SOB for a little bit...that's all the carbon being blown out. drive around for about 30 minutes then go back and change oil. i put 1 can in the gas tank for every 8 gallons (ish) this will clean injectors and lines and such depending on your setup. i do this about twice a year to all my vehicles depending on how much i drive them. I swear by seafoam. you can also get this stuff called SEAFOAM Deep Creap. it's the same thing in an aeresol spray can. I use that in the carb and throttle bodies then reconnect filters or intake tubes. Deep Creap doubles as an excellent penetrating lubricant/hand cleaner too

just don't leave it on your hands too long

Duncan and son · 04-07-2010, 10:55 AM

Good info, Thank you Paul

davebloomer · 04-07-2010, 06:40 PM

Quote:

Originally Posted by Gene

Drivers side is a 1/2 ton and the pass. side is a 1 ton

good find there!

I've looked and looked and don't notice a difference.... anyone care to elaborate?

tim21391 · 04-07-2010, 07:27 PM

if i had the money i would be the young punk to turn it into a sleeper like the oklahoma farm truck id leave flatbed on it and all

**jamie72** · 04-07-2010, 08:24 PM

Quote:

Originally Posted by davebloomer

I've looked and looked and don't notice a difference.... anyone care to elaborate?

fender badges....

nice find.. seems it has gone to a good home..

West Texas Z · 04-07-2010, 08:28 PM

Another Lubbock Member! sweet. We got to meet one day bro.

davebloomer · 04-07-2010, 08:46 PM

Quote:

Originally Posted by jamie72

fender badges....

nice find.. seems it has gone to a good home..

oh lol BAM big ole custom 10 badge.

Duncan and son · 04-07-2010, 09:05 PM

Quote:

Originally Posted by davebloomer

I've looked and looked and don't notice a difference.... anyone care to elaborate?

Dave, years ago the driver fender was replaced and the replacement had C-10 and the original passenger has the correct custom deluxe 30.
Hope that helps Paul

Duncan and son · 04-23-2010, 06:15 PM

Take another look

04-06-2010, 02:36 PM	#27
slomotion Old Duffer Join Date: Mar 2003 Location: Maine Posts: 1,822	Re: Car wash find So, it's a 3/4 ton? __________________ '68 Short C20 Flatbed Dually w/ 292 4bbl, Langdon cast headers, and WC T5 trans. '81 G10 Shorty Van "Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers "Under promise, then over achieve."

04-06-2010, 09:13 PM	#29
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Car wash find Paul, does it have the all-ilusive 7042218? __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

04-07-2010, 10:01 AM	#31
Mr-Jack Beer Drink'n Knuckle Dragger Join Date: Mar 2010 Location: Eatonville, WA Posts: 493	Re: Car wash find very slick looking find...good luck on the plans...that would be a tough one for me, but i probably wouldn't pass on it either. seafoam is great been using it for years. the way i use it is take the vaccume line off the booster going to the intake manifold let it suck about 1/3 the can out the seafoam bottle while it's running and then pour it down til it stalls out the engine. Reconnect the vaccume line to the booster and dump the rest of the can in the crank case. then pour a full can in the tank and let it sit for about 15-20 minutes. after that...start it up and drive it. get on it as much as your vehicle can afford...should smoke like a SOB for a little bit...that's all the carbon being blown out. drive around for about 30 minutes then go back and change oil. i put 1 can in the gas tank for every 8 gallons (ish) this will clean injectors and lines and such depending on your setup. i do this about twice a year to all my vehicles depending on how much i drive them. I swear by seafoam. you can also get this stuff called SEAFOAM Deep Creap. it's the same thing in an aeresol spray can. I use that in the carb and throttle bodies then reconnect filters or intake tubes. Deep Creap doubles as an excellent penetrating lubricant/hand cleaner too just don't leave it on your hands too long __________________ GOD BLESS MY BROTHERS & SISTERS THAT SERVE WITH US *- 67 GMC Long-Wide* *350/SM420* *My BACON Wrapped Meatloaf Recipe*

04-07-2010, 10:55 AM	#32
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: Car wash find Good info, Thank you Paul __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

04-07-2010, 07:27 PM	#34
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: Car wash find if i had the money i would be the young punk to turn it into a sleeper like the oklahoma farm truck id leave flatbed on it and all __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

04-07-2010, 08:28 PM	#36
West Texas Z El Mero Mero Frijolero!! Join Date: Mar 2010 Location: Lubbock, Texas Posts: 669	Re: Car wash find Another Lubbock Member! sweet. We got to meet one day bro. __________________ My Toys: 1993 Ford Mustang LX 5.0 2001 Yamaha V Star 650 1984 Silverado > Build Page <

04-23-2010, 06:15 PM	#39
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: Car wash find Take another look __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.