need build ideas!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vega_67C10 · 07-08-2010, 07:53 PM

I love the truck og! But I'm bias, because it looks identical to my truck. I've got half the side molding off tonight and it ISN'T any fun. I'm using Goo be Gone then rolling it off with my fingers. PITA!

Any how, great start on the truck. I will be watching closely on this one, look for great build ideas for mine also. Good luck and make it fun.

70BLAZERX2 · 07-08-2010, 08:03 PM

I use a shop rag and carbarator cleaner,spray the rag and wipe it off..then wax over where you did it..Works fine. or even lacquer cleaner on a rag will do the same to get that glue off.

Quote:

Originally Posted by Vega_67C10

I love the truck og! But I'm bias, because it looks identical to my truck. I've got half the side molding off tonight and it ISN'T any fun. I'm using Goo be Gone then rolling it off with my fingers. PITA!

Any how, great start on the truck. I will be watching closely on this one, look for great build ideas for mine also. Good luck and make it fun.

og350 · 07-08-2010, 11:13 PM

sorry 70blazer i pulled them off a few eeks ago and sold them to another guy in town. it went back to stock then got a 5-7 drop from norcalss and it is back where it belongs!
i have a few picture updates. for what i told my boss would be a quick paint job turned into a lillt bit more! not happy with how the box came out ( i got lazy) so this winter when i swap motors it will go back to the shop and get the taillights filled and re block the box! there is somthing to be said for sprayable polyester for anyone doing alot of body work! i didn't use it on this one but wish i would have it saves alot of time! i didn't get to crazy with this truck yet... but when i get bored i will!!
well here ya go.

og350 · 07-08-2010, 11:19 PM

a few more. i could not get a sir micheals pan so used one just like it off ebay for 160. not a ban pan just didn't fit! oh yeah i knew the sway bar wasn't siting right so i got new end links and found the po had 4x4 links in it

og350 · 07-08-2010, 11:24 PM

still need to get new front tires! the 275/60/15's are just a tad to big and will hit the fenders! i hope it comes down more after i drive it some. i just need to pull the seat and put in the dynamatt and new crapet and put the box back on and its on the road!!

og350 · 07-08-2010, 11:28 PM

ok sorry one more! this is what i had built for a pull truck i had but then sold the truck so it will go in this one!! ill give the info tomorrow on it i want ideas for more power out of it and more carb vs tbi ideas please!!

og350 · 07-08-2010, 11:33 PM

Quote:

Originally Posted by Vega_67C10

I love the truck og! But I'm bias, because it looks identical to my truck. I've got half the side molding off tonight and it ISN'T any fun. I'm using Goo be Gone then rolling it off with my fingers. PITA!

Any how, great start on the truck. I will be watching closely on this one, look for great build ideas for mine also. Good luck and make it fun.

thanks man your bild looks good! when i take the moldings off at work i use a sharp flexable putty knife behind it then use a 3m rubber wheel in a drill. they work great just go slow and dont get the paint to hot!

http://www.tcpglobal.com/autobodydep...temno=MMM+7498

**scotts62** · 07-08-2010, 11:42 PM

Looks good! Nice build you have!

You can get more power out of a carb but then again you can do more to the tbi setups now a days and make them run pretty good. Check it out http://www.tbichips.com/

Vega_67C10 · 07-09-2010, 11:26 PM

The paint looks awesome, I love red. And the valve covers are my favorite.

og350 · 10-04-2010, 08:56 PM

well the big day came for me and the truck! the reason i bought the truck was to use it in my wedding. eight years ago i had another truck just like this one an i took my wife for our first date in it. the truck got sold a few years later, when i proposed to Pam she told me she wanted the truck back for our wedding. so i found this one on craigslist and had a limitied budget to get it ready for the wedding. it turned out good but the winter plans are just starting.....

**scotts62** · 10-04-2010, 11:06 PM

Well thats pretty cool! Congrats!!

jb1016 · 10-05-2010, 12:20 AM

That's awesome -- you know you can never sell this one now!

JohnC · 10-05-2010, 08:49 AM

Nice job man! Congrats, on both accounts!

I also like how her shoes match the truck!

og350 · 10-05-2010, 10:29 PM

Quote:

Originally Posted by jb1016

you know you can never sell this one now!

now do you mean the wife or the truck? just kidding i said that when i bought it that it will never get re sold!

Vega_67C10 · 10-05-2010, 10:32 PM

Very nice Og!

JohnC · 10-06-2010, 04:38 PM

You know we never did get any really good done pics of the truck. "hint hint"

og350 · 10-06-2010, 11:03 PM

ah man sorry about that!! i went and took pictures of it loaded them on my computer and that is as far as i got. thanks for the "hint" here ya go...

I call this phase 1: repaint, fix alot of po stuff and drive the crap out of it!

phase 2 willbe a motor and maybe a 700r4 swap and if the wife will let me some air ride!! she does not like how it rides so i told her if i air bag it, it will ride better! so we will see. i don't like how the box came out cause i did it really fast ans it has some waves i dont like. so i think i will put caddy taillights in and flip tailgate handle this winter.

og350 · 10-06-2010, 11:05 PM

i need to get one of the shifter yet, maybe tomorrow. i took 70 blazers idea and put a cool shift knob on it!

i do feel the truck is missing something but not so sure what yet. what do you guys think? maybe just bigger wheels and tires? or lower?

JohnC · 10-07-2010, 03:26 PM

I don't think it's missing anything! It turned out awesome man. You could go with some 20's, but it's really hard to beat those SS wheels. My vote would be to just drive it and have fun!!!!

Richie · 10-07-2010, 04:20 PM

I think it looks sweet the way it is.Me personally,I would put a set of wheels on it.Other than that I would drive it and smile.Stance looks great,color is awesome.Congrats on the marraige.Hope it is long and prosperous(and air ride equipped).

LQsFinest · 02-13-2011, 11:42 PM

That a nice truck, question can u tell how to purchase that back bumper peice. I'm new to this remodeling thing. if u can help thank

og350 · 04-28-2011, 11:23 PM

well it was a long winter but it is finally getting warm so i dug the truck out and pulled the v6 out and dropped in the 383! i kept the 5 speed for now due to money. i used a centerforce dual friction clutch set, i found a really really good deal on a set of tri y headers off ebay! i hope to have it started this weekend then it will be off to the muffler shop once i figure out what to have put on it. i have a bunch of pictures but i only have a few on the computer so here are the headers.

SledBurban · 04-29-2011, 10:32 PM

I love that you kept the early grille and didnt swap to the 94 up. Looks really clean. If I had seen this before paint I would have said go for the 454ss mirrors.

ilikethewoods · 09-26-2012, 08:05 AM

NICe truck, what ever happened to the Engine SPECS....?! HA!

07-08-2010, 07:53 PM	#26
Vega_67C10 Registered User Join Date: Aug 2009 Location: Central Indiana Posts: 201	Re: need build ideas!! I love the truck og! But I'm bias, because it looks identical to my truck. I've got half the side molding off tonight and it ISN'T any fun. I'm using Goo be Gone then rolling it off with my fingers. PITA! Any how, great start on the truck. I will be watching closely on this one, look for great build ideas for mine also. Good luck and make it fun. __________________ I Saw Elvis at 1000 Feet - John Force

07-08-2010, 11:13 PM	#28
og350 Registered User Join Date: Apr 2008 Location: river falls, Wisconsin Posts: 236	Re: need build ideas!! sorry 70blazer i pulled them off a few eeks ago and sold them to another guy in town. it went back to stock then got a 5-7 drop from norcalss and it is back where it belongs! i have a few picture updates. for what i told my boss would be a quick paint job turned into a lillt bit more! not happy with how the box came out ( i got lazy) so this winter when i swap motors it will go back to the shop and get the taillights filled and re block the box! there is somthing to be said for sprayable polyester for anyone doing alot of body work! i didn't use it on this one but wish i would have it saves alot of time! i didn't get to crazy with this truck yet... but when i get bored i will!! well here ya go. Attached Images

07-08-2010, 11:19 PM	#29
og350 Registered User Join Date: Apr 2008 Location: river falls, Wisconsin Posts: 236	Re: need build ideas!! a few more. i could not get a sir micheals pan so used one just like it off ebay for 160. not a ban pan just didn't fit! oh yeah i knew the sway bar wasn't siting right so i got new end links and found the po had 4x4 links in it Attached Images

07-08-2010, 11:24 PM	#30
og350 Registered User Join Date: Apr 2008 Location: river falls, Wisconsin Posts: 236	Re: need build ideas!! still need to get new front tires! the 275/60/15's are just a tad to big and will hit the fenders! i hope it comes down more after i drive it some. i just need to pull the seat and put in the dynamatt and new crapet and put the box back on and its on the road!! Attached Images

07-08-2010, 11:28 PM	#31
og350 Registered User Join Date: Apr 2008 Location: river falls, Wisconsin Posts: 236	Re: need build ideas!! ok sorry one more! this is what i had built for a pull truck i had but then sold the truck so it will go in this one!! ill give the info tomorrow on it i want ideas for more power out of it and more carb vs tbi ideas please!! Attached Images

07-08-2010, 11:42 PM	#33
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: need build ideas!! Looks good! Nice build you have! You can get more power out of a carb but then again you can do more to the tbi setups now a days and make them run pretty good. Check it out http://www.tbichips.com/ __________________ Scott 93 crew cab build Project 62

07-09-2010, 11:26 PM	#34
Vega_67C10 Registered User Join Date: Aug 2009 Location: Central Indiana Posts: 201	Re: need build ideas!! The paint looks awesome, I love red. And the valve covers are my favorite. __________________ I Saw Elvis at 1000 Feet - John Force

10-04-2010, 08:56 PM	#35
og350 Registered User Join Date: Apr 2008 Location: river falls, Wisconsin Posts: 236	Re: need build ideas!! well the big day came for me and the truck! the reason i bought the truck was to use it in my wedding. eight years ago i had another truck just like this one an i took my wife for our first date in it. the truck got sold a few years later, when i proposed to Pam she told me she wanted the truck back for our wedding. so i found this one on craigslist and had a limitied budget to get it ready for the wedding. it turned out good but the winter plans are just starting..... Attached Images

10-04-2010, 11:06 PM	#36
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: need build ideas!! Well thats pretty cool! Congrats!! __________________ Scott 93 crew cab build Project 62

10-05-2010, 08:49 AM	#38
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: need build ideas!! Nice job man! Congrats, on both accounts! I also like how her shoes match the truck! Last edited by JohnC; 10-05-2010 at 08:49 AM.

10-05-2010, 10:32 PM	#40
Vega_67C10 Registered User Join Date: Aug 2009 Location: Central Indiana Posts: 201	Re: need build ideas!! Very nice Og! __________________ I Saw Elvis at 1000 Feet - John Force

10-06-2010, 04:38 PM	#41
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: need build ideas!! You know we never did get any really good done pics of the truck. "hint hint"

10-06-2010, 11:03 PM	#42
og350 Registered User Join Date: Apr 2008 Location: river falls, Wisconsin Posts: 236	Re: need build ideas!! ah man sorry about that!! i went and took pictures of it loaded them on my computer and that is as far as i got. thanks for the "hint" here ya go... I call this phase 1: repaint, fix alot of po stuff and drive the crap out of it! phase 2 willbe a motor and maybe a 700r4 swap and if the wife will let me some air ride!! she does not like how it rides so i told her if i air bag it, it will ride better! so we will see. i don't like how the box came out cause i did it really fast ans it has some waves i dont like. so i think i will put caddy taillights in and flip tailgate handle this winter. Attached Images Last edited by og350; 10-06-2010 at 11:03 PM.

10-06-2010, 11:05 PM	#43
og350 Registered User Join Date: Apr 2008 Location: river falls, Wisconsin Posts: 236	Re: need build ideas!! i need to get one of the shifter yet, maybe tomorrow. i took 70 blazers idea and put a cool shift knob on it! i do feel the truck is missing something but not so sure what yet. what do you guys think? maybe just bigger wheels and tires? or lower? Last edited by og350; 10-06-2010 at 11:06 PM.

10-07-2010, 03:26 PM	#44
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: need build ideas!! I don't think it's missing anything! It turned out awesome man. You could go with some 20's, but it's really hard to beat those SS wheels. My vote would be to just drive it and have fun!!!!



Register or Log In To remove these advertisements.

10-07-2010, 04:20 PM	#45
Richie 4:13 Join Date: Dec 1999 Location: St. Cloud, Florida Posts: 500	Re: need build ideas!! I think it looks sweet the way it is.Me personally,I would put a set of wheels on it.Other than that I would drive it and smile.Stance looks great,color is awesome.Congrats on the marraige.Hope it is long and prosperous(and air ride equipped).

02-13-2011, 11:42 PM	#46
LQsFinest Registered User Join Date: Feb 2011 Location: South Carolina Posts: 1	Re: need build ideas!! That a nice truck, question can u tell how to purchase that back bumper peice. I'm new to this remodeling thing. if u can help thank

04-28-2011, 11:23 PM	#47
og350 Registered User Join Date: Apr 2008 Location: river falls, Wisconsin Posts: 236	Re: need build ideas!! well it was a long winter but it is finally getting warm so i dug the truck out and pulled the v6 out and dropped in the 383! i kept the 5 speed for now due to money. i used a centerforce dual friction clutch set, i found a really really good deal on a set of tri y headers off ebay! i hope to have it started this weekend then it will be off to the muffler shop once i figure out what to have put on it. i have a bunch of pictures but i only have a few on the computer so here are the headers. Attached Images

04-29-2011, 10:32 PM	#48
SledBurban Registered User Join Date: Aug 2004 Location: DF DUB Posts: 97	Re: need build ideas!! I love that you kept the early grille and didnt swap to the 94 up. Looks really clean. If I had seen this before paint I would have said go for the 454ss mirrors.

09-26-2012, 08:05 AM	#49
ilikethewoods Registered User Join Date: Aug 2012 Location: AUstiN, TX Posts: 70	Re: need build ideas!! NICe truck, what ever happened to the Engine SPECS....?! HA!

Register or Log In To remove these advertisements.