Found a place to stash my spare motor - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

low'n slow · 08-06-2010, 10:04 PM

Looks good. Did I miss the paint color?

screamin_c10 · 08-07-2010, 12:06 AM

My wife is wanting to go with Marina Blue and a Black Landau top.... Her mom had one when she was a kid and I am trying to emulate it, with a pro touring twist.

screamin_c10 · 08-14-2010, 02:29 PM

Went with longer 2-1/8 inch studs front and rear, which necessitated pulling the rear axles out. The fronts can be popped out and the new ones slid in from the rear without too much issue. I am alot happier with the amount of thread in the lugs now.

I've drug those axles out of the housing so many times now that I'm worried about the seals. I'll replace them again once I get the locker.

The stance came out pretty close with no rubbing so far. we piled my 2teenage boys onto the trunk to squat her down well past the top of the rims and the tires have good clearance.

I figure with glass, exhaust, interior, and driver/passenger she should be fine, I may end up lopping off another inch or so in the front...I'll see once she's on the road and a few miles have been put on 'er....

Probably going to put the headers and steering column back in this evening once it cools down a bit, and then look at getting the exhaust and fuel tank aquired....

JohnC · 08-15-2010, 02:55 PM

Looks good! Looking forward to the progress.

screamin_c10 · 08-16-2010, 01:14 AM

Put the headers and tranny back in, and figured I would crank 'er up for a bit to check for any leaks and enjoy the sound of open headers...

YouTube- 102_2665.MOV

FRENCHBLUE72 · 08-23-2010, 10:00 AM

She is damn near ready for a burn out it looks like..

screamin_c10 · 08-23-2010, 10:25 AM

Quote:

Originally Posted by FRENCHBLUE72

She is damn near ready for a burn out it looks like..

Ohh lord dont tempt me....

screamin_c10 · 09-10-2010, 10:15 PM

So we installed the flowmaster exhaust and man does she sound mean, switched out the eddy 1406 for an AVS thunder 1806 and you can hear and feel a difference in the engine. I dunno if my 1406 is messed up or just jetted wrong but I really am happy with the 1806 so far.

Started work on the pro-touring style dash, still in its infancy but its coming along nicely....Gonna see if I can get Mike (Frizzle Fry) to pop the holes in it for the gauges...

screamin_c10 · 09-10-2010, 10:19 PM

Couple more of the exhaust....

JohnC · 09-11-2010, 10:58 AM

Looks good man!

**oldwagon** · 09-12-2010, 06:45 PM

Making great progress. I've always loved the 67 body style!

Frizzle Fry · 09-29-2010, 09:06 PM

Just found this. Looking schweeeet!

**LEEVON** · 09-30-2010, 11:23 AM

Marina blue is the best color from GM ever in my opinion. Can't go wrong there. And I think it goes great with black interiors (and top).

screamin_c10 · 10-02-2010, 05:17 PM

She wants to keep it a drivable project so we will probably go with Hot Rod Black until all the tweaks and mods are done. That will also give her a chance to completely settle on a final color, she has changed her mind 4 times now.

I know I wish I had held off on painting Screamin', there are so many things I want to do but cant in fear messing up the paint.

Any ways heres a couple more pics of the dash. It sits kind wonky on the stand, so it leans forward a bit. It sits "flatter" in the car.

screamin_c10 · 10-02-2010, 05:59 PM

Thought this might be of use for those that are looking to go 700r4 and keep the install clean. I went with BTO (Bowtie Overdrives) 1406 TV Made Easy kit (130.00), Spectre universal throttle cable 2431 (20.00) , and the Summit G1327 (10.00) dual return spring kit. The Summit part is designed for a Holley but works on the 1406/1806 with some trimming of the base. This whole setup looks and works good in the chevelle and with some tweaking would work quite well with our trucks too.

6772owner · 10-13-2010, 05:47 PM

Looking good, keep it up!

cable666guy · 11-08-2010, 09:33 PM

nice!!

**Dieselwrencher** · 02-03-2011, 12:39 AM

Sweet project and nice score on the car! You are doing a great job on it. Do you have any progress on it lately?

CAL 58 GMC · 02-03-2011, 04:31 PM

Looks great man! Our wife are going to have some sweet Chevelles

NONHOG · 08-06-2011, 11:05 PM

Your Honda thread reminded me of this car. Anything new?

plummen · 08-06-2011, 11:43 PM

Nice project! I had a 67 el camino that went through many differant bigblock/tranny combos when i was younger,wish i still had it!

An air bag inside the passenger side rear coil spring makes a hell of a differance in the traction dept on these cars,and yes 4 wheel non power drum brakes make
for some interesting stopping to say the least!

screamin_c10 · 04-21-2012, 03:24 AM

Wow, its been a long time since I updated this thread... Took last summer off to have some needed surgery and do some work on the house... The Chevelle was put on the back burner, til now...So... where do I start?

We yarded the motor back out and threw it in Screamin to replace her old 307, probably a good thing as it was way more motor than the wife needs or wants. We built a mild 375 horse Vortec 350 as my sons senior project and it now resided between the frame rails of the Chevelle.

Been busy with the interior and audio stuff as this will be a driver for the wife. We finished out the floors, and trunk pan, added sound deadener, insulation and did some custom stuff to the package tray and seats. Started some body work, basically waiting for some sunshine to crank it up a bit. Spent the winter collecting parts...

Lots of little stuff going on, but it will really start takin' shape soon.

screamin_c10 · 04-21-2012, 03:35 AM

More pics...

screamin_c10 · 04-21-2012, 03:40 AM

Morer pics...

screamin_c10 · 04-21-2012, 03:43 AM

Morerer pics...

08-06-2010, 10:04 PM	#26
low'n slow Too Dumb To Know Better Join Date: Nov 2005 Location: Texas Posts: 883	Re: Found a place to stash my spare motor Looks good. Did I miss the paint color?

08-07-2010, 12:06 AM	#27
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: Found a place to stash my spare motor My wife is wanting to go with Marina Blue and a Black Landau top.... Her mom had one when she was a kid and I am trying to emulate it, with a pro touring twist. __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY!

08-14-2010, 02:29 PM	#28
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: Found a place to stash my spare motor Went with longer 2-1/8 inch studs front and rear, which necessitated pulling the rear axles out. The fronts can be popped out and the new ones slid in from the rear without too much issue. I am alot happier with the amount of thread in the lugs now. I've drug those axles out of the housing so many times now that I'm worried about the seals. I'll replace them again once I get the locker. The stance came out pretty close with no rubbing so far. we piled my 2teenage boys onto the trunk to squat her down well past the top of the rims and the tires have good clearance. I figure with glass, exhaust, interior, and driver/passenger she should be fine, I may end up lopping off another inch or so in the front...I'll see once she's on the road and a few miles have been put on 'er.... Probably going to put the headers and steering column back in this evening once it cools down a bit, and then look at getting the exhaust and fuel tank aquired.... Attached Images __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY! Last edited by screamin_c10; 08-14-2010 at 09:05 PM.

08-15-2010, 02:55 PM	#29
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Found a place to stash my spare motor Looks good! Looking forward to the progress.

08-23-2010, 10:00 AM	#31
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Found a place to stash my spare motor She is damn near ready for a burn out it looks like.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-10-2010, 10:15 PM	#33
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: Found a place to stash my spare motor So we installed the flowmaster exhaust and man does she sound mean, switched out the eddy 1406 for an AVS thunder 1806 and you can hear and feel a difference in the engine. I dunno if my 1406 is messed up or just jetted wrong but I really am happy with the 1806 so far. Started work on the pro-touring style dash, still in its infancy but its coming along nicely....Gonna see if I can get Mike (Frizzle Fry) to pop the holes in it for the gauges... Attached Images __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY!

09-10-2010, 10:19 PM	#34
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: Found a place to stash my spare motor Couple more of the exhaust.... Attached Images __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY!

09-11-2010, 10:58 AM	#35
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Found a place to stash my spare motor Looks good man!

09-12-2010, 06:45 PM	#36
oldwagon Registered User Join Date: Feb 2003 Location: Mulvane, Ks. Posts: 756	Re: Found a place to stash my spare motor Making great progress. I've always loved the 67 body style!

09-29-2010, 09:06 PM	#37
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Found a place to stash my spare motor Just found this. Looking schweeeet!

09-30-2010, 11:23 AM	#38
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,893	Re: Found a place to stash my spare motor Marina blue is the best color from GM ever in my opinion. Can't go wrong there. And I think it goes great with black interiors (and top). __________________ '86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids

10-02-2010, 05:17 PM	#39
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: Found a place to stash my spare motor She wants to keep it a drivable project so we will probably go with Hot Rod Black until all the tweaks and mods are done. That will also give her a chance to completely settle on a final color, she has changed her mind 4 times now. I know I wish I had held off on painting Screamin', there are so many things I want to do but cant in fear messing up the paint. Any ways heres a couple more pics of the dash. It sits kind wonky on the stand, so it leans forward a bit. It sits "flatter" in the car. Attached Images __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY! Last edited by screamin_c10; 10-02-2010 at 05:20 PM.

10-02-2010, 05:59 PM	#40
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: Found a place to stash my spare motor Thought this might be of use for those that are looking to go 700r4 and keep the install clean. I went with BTO (Bowtie Overdrives) 1406 TV Made Easy kit (130.00), Spectre universal throttle cable 2431 (20.00) , and the Summit G1327 (10.00) dual return spring kit. The Summit part is designed for a Holley but works on the 1406/1806 with some trimming of the base. This whole setup looks and works good in the chevelle and with some tweaking would work quite well with our trucks too. Attached Images __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY! Last edited by screamin_c10; 12-02-2010 at 01:10 PM. Reason: Too many "well"s

10-13-2010, 05:47 PM	#41
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: Found a place to stash my spare motor Looking good, keep it up! __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644

11-08-2010, 09:33 PM	#42
cable666guy Registered User Join Date: Sep 2008 Location: Willow Grove, PA Posts: 299	Re: Found a place to stash my spare motor nice!!



Register or Log In To remove these advertisements.

02-03-2011, 12:39 AM	#43
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Found a place to stash my spare motor Sweet project and nice score on the car! You are doing a great job on it. Do you have any progress on it lately? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-03-2011, 04:31 PM	#44
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: Found a place to stash my spare motor Looks great man! Our wife are going to have some sweet Chevelles __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

08-06-2011, 11:05 PM	#45
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,458	Re: Found a place to stash my spare motor Your Honda thread reminded me of this car. Anything new? __________________ "I feel the need for speed!"... as soon as I am done with my nap.

08-06-2011, 11:43 PM	#46
plummen Registered User Join Date: Jan 2011 Location: louisville ne Posts: 131	Re: Found a place to stash my spare motor Nice project! I had a 67 el camino that went through many differant bigblock/tranny combos when i was younger,wish i still had it! An air bag inside the passenger side rear coil spring makes a hell of a differance in the traction dept on these cars,and yes 4 wheel non power drum brakes make for some interesting stopping to say the least!

04-21-2012, 03:24 AM	#47
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: Found a place to stash my spare motor Wow, its been a long time since I updated this thread... Took last summer off to have some needed surgery and do some work on the house... The Chevelle was put on the back burner, til now...So... where do I start? We yarded the motor back out and threw it in Screamin to replace her old 307, probably a good thing as it was way more motor than the wife needs or wants. We built a mild 375 horse Vortec 350 as my sons senior project and it now resided between the frame rails of the Chevelle. Been busy with the interior and audio stuff as this will be a driver for the wife. We finished out the floors, and trunk pan, added sound deadener, insulation and did some custom stuff to the package tray and seats. Started some body work, basically waiting for some sunshine to crank it up a bit. Spent the winter collecting parts... Lots of little stuff going on, but it will really start takin' shape soon. Attached Images __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY! Last edited by screamin_c10; 04-21-2012 at 03:32 AM.

04-21-2012, 03:35 AM	#48
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: Found a place to stash my spare motor More pics... Attached Images __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY!

04-21-2012, 03:40 AM	#49
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: Found a place to stash my spare motor Morer pics... Attached Images __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY!

04-21-2012, 03:43 AM	#50
screamin_c10 I dun gradjiated collij!!! Join Date: Jan 2006 Location: St. Helens Oregon Posts: 1,751	Re: Found a place to stash my spare motor Morerer pics... Attached Images __________________ Built NOT Bought. Viper Red 1971 LWB C10 355 Vortec W/700R4 4/5 drop AKA Screamin' You are missed! 2006 F150 XLT 5.4L Triton Rollin' on 22s the "F1" 67 C20 PS/AC/327/TH400 we call 'er "Bessie" 67 Malibu PS/ZR1-LS1 Brakes/350 Vortec/700R4 2/2 drop on 18" 338s - Tracy's "Boo" Boosted '67 Cougar EFI 5.0 HO roller motor/T5/8.8 Tracloc/ 4 wheel disks - "Project Panther" 79 Honda Z50 - stretched, cafe'd and hotrodded 125CC Lifan/5spd FEAR THE MONKEY!

Register or Log In To remove these advertisements.