GA standalone 5.3 harness and chopped crossmember - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GCncsuHD · 05-18-2010, 11:31 AM

Do you have any pics of the harness so I can see how well it was made? I've never seen one of wait4me's harnesses, although I had my 01 tuned by them 5 years ago so I can vouch for their tuning abilities.

Possibly a pic of it laid out on the floor, as well as when you had it installed?

If it looks like what I need, I may buy this week.

Thanks,
Garrett

blazerboy72 · 05-18-2010, 06:25 PM

This is the only pic I have. I can take more if needed. My motor is disassembled right now but I should have it back together Thursday.

GCncsuHD · 05-18-2010, 06:49 PM

Are the wires labeled? Any problems with the harness? Does it have the OBDII Diagnostic port? I don't see the plug in the picture above.

blazerboy72 · 05-18-2010, 06:55 PM

It does not have the obd port. All of the wires are labeled except for one or two which the labels have fallen off of. As far as I know nothing is wrong with the harness. I have had it in my truck running for a few years but the truck hasn't been drivable but I don't see why there would be any problems.

blazerboy72 · 05-18-2010, 06:56 PM

Im pretty sure the wires for the obd II are labeled the plug just isnt there.

05-18-2010, 11:31 AM	#26
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: standalone 5.3 harness and chopped crossmember Do you have any pics of the harness so I can see how well it was made? I've never seen one of wait4me's harnesses, although I had my 01 tuned by them 5 years ago so I can vouch for their tuning abilities. Possibly a pic of it laid out on the floor, as well as when you had it installed? If it looks like what I need, I may buy this week. Thanks, Garrett __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s Last edited by GCncsuHD; 05-18-2010 at 11:32 AM.

05-18-2010, 06:25 PM	#27
blazerboy72 Senior Member Join Date: Mar 2002 Location: Temple, Ga Posts: 854	Re: standalone 5.3 harness and chopped crossmember This is the only pic I have. I can take more if needed. My motor is disassembled right now but I should have it back together Thursday.

05-18-2010, 06:49 PM	#28
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: standalone 5.3 harness and chopped crossmember Are the wires labeled? Any problems with the harness? Does it have the OBDII Diagnostic port? I don't see the plug in the picture above. __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s Last edited by GCncsuHD; 05-18-2010 at 06:52 PM.

05-18-2010, 06:55 PM	#29
blazerboy72 Senior Member Join Date: Mar 2002 Location: Temple, Ga Posts: 854	Re: standalone 5.3 harness and chopped crossmember It does not have the obd port. All of the wires are labeled except for one or two which the labels have fallen off of. As far as I know nothing is wrong with the harness. I have had it in my truck running for a few years but the truck hasn't been drivable but I don't see why there would be any problems.

05-18-2010, 06:56 PM	#30
blazerboy72 Senior Member Join Date: Mar 2002 Location: Temple, Ga Posts: 854	Re: standalone 5.3 harness and chopped crossmember Im pretty sure the wires for the obd II are labeled the plug just isnt there.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.