carb spacers

[81ratrodc10]

cool who makes the one you run

[bitchin85]

i have a 2 inch offy 4 hole... pretty much, a spacer is a spacer.. just make sureits not super cheap and the surfaces are warped.. happened to me once

[81ratrodc10]

i just saw one on ebay from mr gasket for 20 bucks seem about right

[ak_nut]

Im running a 305 in my 85 short bed..When I first got it it was an absolute turd..It wouldnt get out of its own way..I yanked all the emission crap of there and added a flowmaster muffler dumped and an edelbrock 600cfm carb..This 305 is a beast now!!I swear it will lay down a 30-40 black strip easily.

[81ratrodc10]

yeah i have long tube headers to flowmasters dumped before rear tires out the side has all the emission stuff off mine seams pretty nasty i also have a 2200 stall converter in a th350 definatly burns forever trying to find a little better tires on a different thread but i like it for now

[81ratrodc10]

so if get one it just needs 2 new carb gaskets one for the bottom and on for the top and longer studs

[qu1cks1lver56]

Originally Posted by 3r!c84

oh then it might be bigger..my friend has a 650cfm on his 350 and its still too big of a carb

usually the rule of thumb is you can do 2 cfm per cubic inch, so a 600 is fine on a 305 just tune it right for the weather. I find myself adjusting my idle circuits everytime the temperature makes a drastic change.