? How many are running ram horns? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

'72 Shorty · 02-13-2003, 11:34 PM

Quote:

Originally posted by Dirt Dobber
What is a set of good, not cracked, and good studded rams horns worth?

I ended up paying $70 each at a yard for the ones on my Trooper. All the other styles of manifolds hit the firewall and there's no room for headers in there.

Really old set of seriously warped headers on the '72, I don't even know what they are. They where on when I got the truck.

Mike C · 02-13-2003, 11:48 PM

I have the 2 1/2" 'vette rams horns on my Jimmy. Love 'em.

A used set is worth about $100 IMO. New they are $150. ($75 each or so )

1971LT1SWBPOSI373 · 02-14-2003, 12:22 AM

Ceramic headers here!!!!!!!

weasel29gm · 02-14-2003, 12:26 AM

Got em' too, thinkin' about headers later.

Jackal2k9 · 02-14-2003, 12:28 AM

63-64 vette manifolds r worth the big bucks. find the numbers. if they r original the you got something

gashog · 02-14-2003, 12:55 AM

Me too at least for now.

O'l Buck · 02-14-2003, 04:48 AM

I need to get a new one for the RH side of my 4x4, the last straight dump I bought cost me either $30 or $50, I can't remember which. I'm hoping they are still that cheap......the local junkyard gets them from some company in Canada that is casting them. Oh yeah, my other 72 has ramhorns as well.

GMCjunkie · 02-14-2003, 06:42 AM

Brand spankin new!! Just ditched the headders and went back to ramhorn... also run them on the step.

Church · 02-14-2003, 08:00 AM

I'm running the 3797901 (Left Hand) & 3814970 Corvette Exhaust Manifold (Right Hand) Cast iron Corvette "ram's horn" exhaust manifolds that have extra-large 2 1/2" diameter outlets. They are recommended for street rods and other custom installations. Corvette exhaust manifolds are also popular in limited racing classes that require production-type exhaust systems. This left-hand manifold was used on high-performance 1962-63 327ci Corvettes. I grinded the gen mounts off and then used the POR-15 exhaust manifold paint.

I could not find a set of headers that would work with the angle plug heads and not hand down too low as well.

toms68cst · 02-14-2003, 09:22 AM

Stockers here. Right now they are sitting on my cart.

gangforward · 02-14-2003, 12:43 PM

me gots ram horns too!

Dandeluxe · 02-14-2003, 05:39 PM

I BOUGHT MINE FROM MODERN CHEVROLET THEY ARE 2.5 INCH CORVETTE STYLE STRAIGHT DUMPS . RUNS BETTER THAN THE HEADERS AND NO MORE BURNT WIRES . AND NO MORE LOOSE BOLTS AND ALL THE OTHER HEADACHES THAT GO WITH HEADERS. IT WAS ONE OF THE BEST THINGS I COULD HAVE DONE TO MY TRUCK. DAN

:p :p

matt_field · 02-14-2003, 08:18 PM

they are matching number ones, i had checked a a while back

**JIMs70GMC** · 02-15-2003, 07:52 PM

Got the 62' vette ones.

02-13-2003, 11:48 PM	#27
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,727	I have the 2 1/2" 'vette rams horns on my Jimmy. Love 'em. A used set is worth about $100 IMO. New they are $150. ($75 each or so ) __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

02-14-2003, 12:22 AM	#28
1971LT1SWBPOSI373 Registered User Join Date: Mar 2002 Location: Springfield, VA Posts: 460	Ceramic headers here!!!!!!! __________________ 1971 Shortbed 350/350 w/ Posi-traction 3:73's 1996 Chevy Silverado TJ in Springfield, Virginia Likes old Chevy trucks Drinks Miller MGD

02-14-2003, 12:26 AM	#29
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,096	Got em' too, thinkin' about headers later. __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

02-14-2003, 12:55 AM	#31
gashog Active Member Join Date: Oct 2002 Location: Lake co. california Posts: 192	Me too at least for now. __________________ 69 Custom/10 454 Turbo 400 and 70 Custom/20 350 Turbo 350, 73 cheyanne C/10 also 69 camaro Z/28 and 85 Iroc Z

02-14-2003, 04:48 AM	#32
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	I need to get a new one for the RH side of my 4x4, the last straight dump I bought cost me either $30 or $50, I can't remember which. I'm hoping they are still that cheap......the local junkyard gets them from some company in Canada that is casting them. Oh yeah, my other 72 has ramhorns as well. __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

02-14-2003, 12:28 AM	#30
Jackal2k9 Registered User Join Date: Apr 2002 Location: Katy, Texas Posts: 171	63-64 vette manifolds r worth the big bucks. find the numbers. if they r original the you got something

02-14-2003, 06:42 AM	#33
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Brand spankin new!! Just ditched the headders and went back to ramhorn... also run them on the step. Attached Images __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

02-14-2003, 08:00 AM	#34
Church Carolina Classic Trucks Join Date: Jan 2000 Location: The South Posts: 792	I'm running the 3797901 (Left Hand) & 3814970 Corvette Exhaust Manifold (Right Hand) Cast iron Corvette "ram's horn" exhaust manifolds that have extra-large 2 1/2" diameter outlets. They are recommended for street rods and other custom installations. Corvette exhaust manifolds are also popular in limited racing classes that require production-type exhaust systems. This left-hand manifold was used on high-performance 1962-63 327ci Corvettes. I grinded the gen mounts off and then used the POR-15 exhaust manifold paint. I could not find a set of headers that would work with the angle plug heads and not hand down too low as well. Attached Images __________________

02-14-2003, 09:22 AM	#35
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,296	Stockers here. Right now they are sitting on my cart. __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

02-14-2003, 12:43 PM	#36
gangforward Hootis is as Hootis does... Join Date: Nov 2002 Location: Southern Georgia Posts: 500	me gots ram horns too! __________________ 67 C10 LWB Fleet, 383, TH400, PS, 4BL-Holley, Headers & 3" Exhaust, 3" drop front, 4" rear springs, ECI shock relocate, Panhard Bar kit, wheels & tires 1995 Z28 Convertible - Borla, K&N, Lingenfelter Motor, C6 Wheels & Tires 1990 2500 4x4 Suburban 3" Catbac System, K&N, 2" Lift, Wheels, Tires

02-14-2003, 05:39 PM	#37
Dandeluxe Senior Member Join Date: Nov 2001 Location: st.louis mo. Posts: 717	2.5 inch ramhorns I BOUGHT MINE FROM MODERN CHEVROLET THEY ARE 2.5 INCH CORVETTE STYLE STRAIGHT DUMPS . RUNS BETTER THAN THE HEADERS AND NO MORE BURNT WIRES . AND NO MORE LOOSE BOLTS AND ALL THE OTHER HEADACHES THAT GO WITH HEADERS. IT WAS ONE OF THE BEST THINGS I COULD HAVE DONE TO MY TRUCK. DAN :p :p __________________ 1969 cst swb 350/400 th . DANNY C . ["]FRIENDS DONT LET FRIENDS DRIVE F@RD$!! 1969 cst swb corvette hugger orange with 400 hp sbc I started out with nothing and i held on to it

02-14-2003, 08:18 PM	#38
matt_field Registered User Join Date: Apr 2001 Location: Detroit Lakes, Minnesota Posts: 885	they are matching number ones, i had checked a a while back __________________ 1971 k5 blazer 80k mike survivor 1972 3/4 ton 4wd Cummins 12v 1967 swb 2wd 427bbc 1968 4wd shortbox 1971 Cheyenne swb k10 unrestored 1971 Cheyenne super 40k 402bb survivor 1967 Chevy k10 (first truck) 1968 L78 camaro survivor 18k miles 1969 z28 survivor 60k miles 1969 z28 survivor 39k miles 1969 z28 rs survivor 80k miles

02-15-2003, 07:52 PM	#39
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Got the 62' vette ones. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.