KS 73+ DJM 3" Drop spindles for 1.25" rotor - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

m6z · 07-30-2010, 12:11 PM

Quote:

Originally Posted by hayesperformanceplus

Would they work on a 3/4 ton?

No, unless you were changing to 1/2 ton disc brakes. Then I think you can just change the ball joints to the 1/2 ton ones. They are not going to work with the 8 lug stuff.

hayesperformanceplus · 07-30-2010, 12:17 PM

Which companies made the spindles for the 3/4 tons and 1 tons?

m6z · 07-30-2010, 12:30 PM

Quote:

Originally Posted by hayesperformanceplus

Which companies made the spindles for the 3/4 tons and 1 tons?

No idea. Might check the suspension section.

07-30-2010, 12:17 PM	#27
hayesperformanceplus Performance Shop Owner Join Date: Oct 2009 Location: Edmonton, Alberta, CANADA Posts: 332	Re: 73+ DJM 3" Drop spindles for 1.25" rotor Which companies made the spindles for the 3/4 tons and 1 tons? __________________ 1980 GMC C25 Sierra Classic with 20,000 ORIGINAL MILES (32,000Km's) & Matching numbers 1977 GMC C35 Sierra Classic Crew Cab 454 A/C with 21,000 Miles & Matching numbers 1980 Chevrolet Silverado K20 400 4spd 4X4 74,000km's 1980 GMC C25 Sierra Classic CREW CAB, All Options, with 49,000 Miles 1979 GMC C15 Sierra Classic 454 1989 GMC R3500 CREW CAB 2003 Grand Prix GTP 1998 Regal GS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.