MN Parts trucks!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AJs72K5 · 06-19-2010, 12:09 AM

Would you be willing to part with the blue Spicer lockouts on the teal 72 4x4? Can I get a better picture of them? How much?

**too much stuff** · 06-19-2010, 09:16 AM

Quote:

Originally Posted by AJs72K5

Would you be willing to part with the blue Spicer lockouts on the teal 72 4x4? Can I get a better picture of them? How much?

They were in pretty rough shape, and if i remember right, the pass side was a different color. I can still look next time i am out there if you want.

AJs72K5 · 06-19-2010, 10:21 AM

Quote:

Originally Posted by too much stuff

They were in pretty rough shape, and if i remember right, the pass side was a different color. I can still look next time i am out there if you want.

Nah, that's ok. Thanks for the reply though.

67chevy1series · 06-19-2010, 05:54 PM

i am in terested in the hub caps from the 67 and the front fenders of the 67 as well but im in merced califorinia and shipping would kill the deal

**too much stuff** · 06-19-2010, 06:15 PM

Quote:

Originally Posted by 67chevy1series

i am in terested in the hub caps from the 67 and the front fenders of the 67 as well but im in merced califorinia and shipping would kill the deal

The fenders are no good. I can check out the caps, but they are aluminum i believe. Not original...

8bolt · 06-20-2010, 09:17 PM

Hi would you have a good set of front inner fenders if you do, pictures and price please. Thank you 8bolt.

**too much stuff** · 06-20-2010, 10:12 PM

Quote:

Originally Posted by 8bolt

Hi would you have a good set of front inner fenders if you do, pictures and price please. Thank you 8bolt.

Sorry, good sheetmetal is hard to find in MN. I can't help you on that one. Eric

**88JRFAN** · 06-21-2010, 12:09 AM

Would you be willing to sell the upper chrome piece off of that blue '68 GMC? The piece that goes under the hood. Thanks, Daren

Number98 · 06-21-2010, 06:16 PM

Quote:

Originally Posted by too much stuff

Number98, That isn't even all of them..

Dang.... We all have a sickness I think....

**too much stuff** · 06-24-2010, 10:24 AM

Quote:

Originally Posted by Number98

Dang.... We all have a sickness I think....

I don't consider it a sickness if i am in denial.

sgaylord · 06-24-2010, 01:47 PM

Do you happen to have a high hump tranny cover? If so could you pm me with a price. My zip is 32087.

Steve

Devil Pup · 06-28-2010, 02:37 AM

would you happen to have a decent automatic steering column with brackets ect. "tilt prefered however non tilt is fine" Im looking to move my shifter from the floor to the column so i can put in my cup holders on my 02 silverado seats. Thanks, Mark

67chevy1series · 06-28-2010, 04:15 AM

oh okay so they arent the original hubcaps

**Dieselwrencher** · 07-10-2010, 02:17 AM

Quote:

Originally Posted by too much stuff

Cheyenne cab that someone did a bunch of work to already. Bolt in hump, cargo light, headliner and A/C. $150

Eric, can you get me a few more pics of the rockers and inner rockers on the first cab in post 5? Thanks Ryan.

gregg72340 · 07-10-2010, 01:00 PM

If you decide to part anything I am looking for the top grille bar for a GMC thanks

**Dieselwrencher** · 07-16-2010, 09:33 PM

Eric, can you get me a few more pics of the rockers and inner rockers on the first cab in post 5? Thanks Ryan.

**too much stuff** · 07-16-2010, 10:13 PM

Quote:

Originally Posted by Dieselwrencher

Eric, can you get me a few more pics of the rockers and inner rockers on the first cab in post 5? Thanks Ryan.

I haven't made it back out to the storage lot yet. I will post pics when i do.

**Dieselwrencher** · 07-17-2010, 01:20 AM

Ok Eric, no problem. Thanks again.

rich67 · 07-17-2010, 01:30 AM

eric do you still have truck #1? if so, could i get more pics? thanx rich

**oldgold70c10** · 07-17-2010, 03:58 PM

That blue 69-70 lwb with the 3 speed sure looks complete.... what's the story there? If you were closer I would take that home!

Duncan and son · 07-17-2010, 10:22 PM

Hey Eric, at least now we know how you got your name. Ha

**too much stuff** · 07-17-2010, 10:37 PM

Rich, adding a couple pics for you. Not sure what else you need pics of...
oldgold, my location kills most deals. It is complete and ran and drove when i got it...
Paul, this is just a part of what i am having to sell. I already crushed and sold around 10 trucks and have a few i am keeping also.

**nightmare** · 07-18-2010, 02:30 PM

Do you happen to have any '71-'72 2wd rear ends with a 3.73 posi?

**too much stuff** · 07-18-2010, 02:36 PM

Quote:

Originally Posted by nightmare

Do you happen to have any '71-'72 2wd rear ends with a 3.73 posi?

I have a couple of 6 lug rears is it. No 5 lugs with posi for sale.

**Canadian694x4** · 07-18-2010, 05:45 PM

Eric, I know your not parting but I may have to buy the whole truck (69-70 with a very nice grill, running V-8, 3 speed manual. No title. $550) if you can get me some better pictures of the complete grill when ya have the time.

Thanks, Brian.

06-19-2010, 12:09 AM	#26
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Parts trucks!!! Would you be willing to part with the blue Spicer lockouts on the teal 72 4x4? Can I get a better picture of them? How much? __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

06-19-2010, 05:54 PM	#29
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Parts trucks!!! i am in terested in the hub caps from the 67 and the front fenders of the 67 as well but im in merced califorinia and shipping would kill the deal

06-20-2010, 09:17 PM	#31
8bolt Registered User Join Date: May 2005 Location: COLD COUNTY Posts: 168	Re: Parts trucks!!! Hi would you have a good set of front inner fenders if you do, pictures and price please. Thank you 8bolt.

06-21-2010, 12:09 AM	#33
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: Parts trucks!!! Would you be willing to sell the upper chrome piece off of that blue '68 GMC? The piece that goes under the hood. Thanks, Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM Last edited by 88JRFAN; 06-21-2010 at 12:14 AM.

06-24-2010, 01:47 PM	#36
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Parts trucks!!! Do you happen to have a high hump tranny cover? If so could you pm me with a price. My zip is 32087. Steve __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

06-28-2010, 02:37 AM	#37
Devil Pup Registered User Join Date: Dec 2007 Location: Riverside, Ca Posts: 407	Re: Parts trucks!!! would you happen to have a decent automatic steering column with brackets ect. "tilt prefered however non tilt is fine" Im looking to move my shifter from the floor to the column so i can put in my cup holders on my 02 silverado seats. Thanks, Mark __________________ Lifted 2wd 1969 C20/ 5.3LS/4L60E :http://67-72chevytrucks.com/vboard/s...d.php?t=728388

06-28-2010, 04:15 AM	#38
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Parts trucks!!! oh okay so they arent the original hubcaps

07-10-2010, 01:00 PM	#40
gregg72340 Registered User Join Date: May 2010 Location: ambler, pa Posts: 325	Re: Parts trucks!!! If you decide to part anything I am looking for the top grille bar for a GMC thanks __________________ Just would like the snow to stop so I can actually work on my truck!!!!!!!!!!!

07-16-2010, 09:33 PM	#41
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Parts trucks!!! Eric, can you get me a few more pics of the rockers and inner rockers on the first cab in post 5? Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-17-2010, 01:20 AM	#43
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Parts trucks!!! Ok Eric, no problem. Thanks again. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-17-2010, 01:30 AM	#44
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Parts trucks!!! eric do you still have truck #1? if so, could i get more pics? thanx rich

07-17-2010, 03:58 PM	#45
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,025	Re: Parts trucks!!! That blue 69-70 lwb with the 3 speed sure looks complete.... what's the story there? If you were closer I would take that home! __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

07-17-2010, 10:22 PM	#46
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: Parts trucks!!! Hey Eric, at least now we know how you got your name. Ha __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

07-17-2010, 10:37 PM	#47
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Parts trucks!!! Rich, adding a couple pics for you. Not sure what else you need pics of... oldgold, my location kills most deals. It is complete and ran and drove when i got it... Paul, this is just a part of what i am having to sell. I already crushed and sold around 10 trucks and have a few i am keeping also. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-18-2010, 05:45 PM	#50
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Re: Parts trucks!!! Eric, I know your not parting but I may have to buy the whole truck (69-70 with a very nice grill, running V-8, 3 speed manual. No title. $550) if you can get me some better pictures of the complete grill when ya have the time. Thanks, Brian. __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.