'82 Shortbed 6.0 project - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kSStamp0182 · 07-21-2010, 07:36 PM

Quote:

Originally Posted by 1972SuperCheyenne

A transmission shop can swap the mainshaft and the tailshaft housing for a 2wd version. Maybe sell the transfer case to offset the cost.

yeah ive been looking at doing that too. i would just rather trade someone than having to screw with all that

glock35ipsc · 07-22-2010, 03:27 PM

Quote:

Originally Posted by kSStamp0182

so do i need to replace the ones on the sending unit as well? geez haha thats such a PITA

Yes, you definitely need to use FI clamps.

68GMCCustom · 07-20-2010, 06:49 PM

that wiring looks like some real fun!

franky69c10 · 07-21-2010, 07:19 PM

look'n nice

*1LOW4X4* · 07-21-2010, 07:39 PM

Lookin good man. I wish I had my LS1 ready for my '01 silverado, cause i'd drop the old 5.3 in my 85 fer sure.

Tyler Texas? I'm about 3 hrs South of you in Lumberton Texas...but still in the Piney woods lol

mcbassin · 07-21-2010, 11:59 PM

Looks like a solid start for a project! Hard to believe someone could survive that crash! Wow!

Puglia10 · 08-02-2010, 01:00 PM

mine is a 2001 too, do you mean we dont need the vette stuff, or what needs to be done? sorry im just a little confused, thanks

STOCKISH · 08-02-2010, 01:52 PM

In 2003 I think ? they went to the returnless style rails on the trucks. My 2006 6.0 truck motor has a returnless style fuel rail.

Puglia10 · 08-02-2010, 04:33 PM

Quote:

Originally Posted by 1972SuperCheyenne

In 2003 I think ? they went to the returnless style rails on the trucks. My 2006 6.0 truck motor has a returnless style fuel rail.

so we want a returnless style?

kSStamp0182 · 12-28-2010, 07:46 PM

Quote:

Originally Posted by Puglia10

so we want a returnless style?

returnless seems safer to me, having only one full length fuel line. but i used the vette filter/regulator, and all you need is the driver fuel rail from an 04+ truck. the passenger is (or on mine) the exact same part #. simple to swap. and a small cap to cap the vacuum port that is no longer needed. sorry for the late reply.

GmtGmt · 08-02-2010, 06:44 PM

Quote:

Originally Posted by kSStamp0182

an this is it after being hit by a hydroplaning semi..

a testimony to the safety of these trucks!

WOW

What kind of injurys did you get after that?

Going to be a sweet build

kSStamp0182 · 12-28-2010, 07:50 PM

Quote:

Originally Posted by GmtGmt

WOW

What kind of injurys did you get after that?

Going to be a sweet build

i had double pneumothorax, shattered pelvis, a few cracked ribs and plenty of cuts. our steering wheels dont feel too great to the chest.

kSStamp0182 · 12-31-2010, 12:20 AM

and another, of the truck itself. it is in great condition, has anyone heard of a 1/2 ton shortbed diesel? thats what it was originally (and the diesel title exempts me from emissions i believe

). it had a 350/350 when i got it tho.

mcbassin · 12-31-2010, 02:10 AM

Quote:

Originally Posted by kSStamp0182

and another, of the truck itself. it is in great condition, has anyone heard of a 1/2 ton shortbed diesel? thats what it was originally (and the diesel title exempts me from emissions i believe

). it had a 350/350 when i got it tho.

My Brother in-law had a 1980 "Mini 18" stepside deisel with stacks and all.

kSStamp0182 · 12-07-2010, 11:39 AM

sorry i havent updated in awhile guys, been so busy between work an school. i will update later today when i get off tho.

jasonhall · 12-17-2010, 11:10 PM

Lookin good!

kikkegek · 12-18-2010, 05:55 PM

respect!

I am gonna follow your build!

JuicyJ · 12-22-2010, 02:56 AM

Nice truck and good luck with the build. Those ls engines are sweet.

*87 chevy silverado* · 12-31-2010, 12:45 AM

yea stitch has one

http://67-72chevytrucks.com/vboard/s...d.php?t=418169

franky69c10 · 12-31-2010, 01:47 AM

Posted via Mobile Device

grayharville · 01-03-2011, 11:27 PM

nice lookin truck man! tyler huh? im about 10 minutes away in chandler, right down highway 31. i noticed you said somethin about an auto tech class. Wouldnt happen to be at TJC would it?

kSStamp0182 · 01-04-2011, 04:18 PM

Quote:

Originally Posted by grayharville

nice lookin truck man! tyler huh? im about 10 minutes away in chandler, right down highway 31. i noticed you said somethin about an auto tech class. Wouldnt happen to be at TJC would it?

thats the one. its right close to 31, about half a mile right there by tractor supply

grayharville · 01-05-2011, 12:15 AM

You wouldnt happen to know a kid named colby that attends the auto tech classes would ya? kinda big guy that drives a grey ex-cab 99 chevy?

kSStamp0182 · 01-05-2011, 08:23 PM

Quote:

Originally Posted by grayharville

You wouldnt happen to know a kid named colby that attends the auto tech classes would ya? kinda big guy that drives a grey ex-cab 99 chevy?

sure do, we've actually traded a few parts off. cuz i have a black lifted '01 chevy similar to his thats my DD

grayharville · 01-06-2011, 11:13 PM

Hah, what a small world! I remember him tellin me about your truck, Its a black ex-cab with a 6 inch lift right? I believe thats what we were talkin bout. We went to highschool together and used to run around quite alot. Anyways, good lookin truck, what are your plans for the body?

07-20-2010, 06:49 PM	#3
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: '82 Shortbed 6.0 project that wiring looks like some real fun! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

07-21-2010, 07:19 PM	#4
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: '82 Shortbed 6.0 project look'n nice __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

07-21-2010, 07:39 PM	#5
1LOW4X4 Account Suspended Join Date: Jul 2010 Location: Southeast Texas Posts: 189	Re: '82 Shortbed 6.0 project Lookin good man. I wish I had my LS1 ready for my '01 silverado, cause i'd drop the old 5.3 in my 85 fer sure. Tyler Texas? I'm about 3 hrs South of you in Lumberton Texas...but still in the Piney woods lol

07-21-2010, 11:59 PM	#6
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: '82 Shortbed 6.0 project Looks like a solid start for a project! Hard to believe someone could survive that crash! Wow! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-02-2010, 01:00 PM	#7
Puglia10 Registered User Join Date: Apr 2009 Location: Boston MA Posts: 387	Re: '82 Shortbed 6.0 project mine is a 2001 too, do you mean we dont need the vette stuff, or what needs to be done? sorry im just a little confused, thanks __________________ 1979 c30 3+3 dually 1946 GMC

08-02-2010, 01:52 PM	#8
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: '82 Shortbed 6.0 project In 2003 I think ? they went to the returnless style rails on the trucks. My 2006 6.0 truck motor has a returnless style fuel rail. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-31-2010, 12:20 AM	#13
kSStamp0182 LSX addict Join Date: Jun 2009 Location: Tyler, Texas Posts: 262	Re: '82 Shortbed 6.0 project and another, of the truck itself. it is in great condition, has anyone heard of a 1/2 ton shortbed diesel? thats what it was originally (and the diesel title exempts me from emissions i believe ). it had a 350/350 when i got it tho.

12-07-2010, 11:39 AM	#15
kSStamp0182 LSX addict Join Date: Jun 2009 Location: Tyler, Texas Posts: 262	Re: '82 Shortbed 6.0 project sorry i havent updated in awhile guys, been so busy between work an school. i will update later today when i get off tho.

12-17-2010, 11:10 PM	#16
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: '82 Shortbed 6.0 project Lookin good!

12-18-2010, 05:55 PM	#17
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: '82 Shortbed 6.0 project respect! I am gonna follow your build! __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

12-22-2010, 02:56 AM	#18
JuicyJ Registered User Join Date: Jun 2010 Location: San Antonio, Texas Posts: 123	Re: '82 Shortbed 6.0 project Nice truck and good luck with the build. Those ls engines are sweet. __________________ America is all about speed, hot nasty bad ass speed

12-31-2010, 12:45 AM	#19
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: '82 Shortbed 6.0 project yea stitch has one http://67-72chevytrucks.com/vboard/s...d.php?t=418169 Last edited by 87 chevy silverado; 12-31-2010 at 12:46 AM.

12-31-2010, 01:47 AM	#20
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: '82 Shortbed 6.0 project Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

01-03-2011, 11:27 PM	#21
grayharville ^^who I am^^ what I say> Join Date: Jun 2009 Location: Murchison, Tx Posts: 992	Re: '82 Shortbed 6.0 project nice lookin truck man! tyler huh? im about 10 minutes away in chandler, right down highway 31. i noticed you said somethin about an auto tech class. Wouldnt happen to be at TJC would it? __________________ 70 chevy LWB 350/TH350 Barn find (AKA the 70) http://www.67-72chevytrucks.com/vboa...d.php?t=406364 East Tx Squares

01-05-2011, 12:15 AM	#23
grayharville ^^who I am^^ what I say> Join Date: Jun 2009 Location: Murchison, Tx Posts: 992	Re: '82 Shortbed 6.0 project You wouldnt happen to know a kid named colby that attends the auto tech classes would ya? kinda big guy that drives a grey ex-cab 99 chevy? __________________ 70 chevy LWB 350/TH350 Barn find (AKA the 70) http://www.67-72chevytrucks.com/vboa...d.php?t=406364 East Tx Squares



Register or Log In To remove these advertisements.

01-06-2011, 11:13 PM	#25
grayharville ^^who I am^^ what I say> Join Date: Jun 2009 Location: Murchison, Tx Posts: 992	Re: '82 Shortbed 6.0 project Hah, what a small world! I remember him tellin me about your truck, Its a black ex-cab with a 6 inch lift right? I believe thats what we were talkin bout. We went to highschool together and used to run around quite alot. Anyways, good lookin truck, what are your plans for the body? __________________ 70 chevy LWB 350/TH350 Barn find (AKA the 70) http://www.67-72chevytrucks.com/vboa...d.php?t=406364 East Tx Squares

Register or Log In To remove these advertisements.