What is your dream square??

[DBLSPRT68]

I'd love to have an Indy Hauler of any year they were made. 80 was my favorite tho!

[81ratrodc10]

a frame laying single wheel crew cab is what i am currently dreaming of but ofton two change also

[80SPORT]

1980 Chevy Sport 2wd short bed;full load with factory buckets,red/red,white interior survivor with under 10000 original miles .....as they say in the Corvette world ...it is only original once.
Second choice would be a 91 dually crewcab 2wd in red/red to tow the 80 around ...only year for the overdrive trans in a square body and you got the mark 5 454.

[texasfunk]

Originally Posted by 1972SuperCheyenne

Mine would be Hills Hotrods yellow and white LMC truck. I am so close to painting mine yellow and white it's killing me.

me tooo!!! i want to do the paint scheme but to a round eye!! i got my front clip, and even a quart of yellow for some jambing...hmmmmmm.....

[hitcher]

my currant 88 . took me a long while to find one i liked . still have plenty to do but 90% of it now is what i want . the over drive tranny will be the next big expense . after that ill just be messing with it as i go .

[jdurant]

Well, if we are talking about dreams. I've been kicking this around in my head for awhile. I've never done the swap, or studied the earlier gen. square's core support. But I've always liked the fenders of the late models because of the point at the front, and the bumpers because they are just smoother and more aesthetic--as opposed to the older ones which seem more utilitarian. But, then I like the earlier grilles. So I've always wondered what this would look like.

Of course, if possible (and anything is possible) the core support, bumper, hood, and fenders would all have to be modified.
I wish I had the ability of a few of the guys on here!

Ahh... Dreams.

[Mad Rods]

Red Rockr baby!!!! It's here somewhere....

[AceX]

[BigBlocksRule]

One that's completed and paid for. I've never had one

[Damien]

stock mint '73-74 Blazer. Doesn't matter if it is two wheel or four wheel. 350 auto

[dbmx66]

my dream square would be a full tube chassis, fiberglass body, strut front suspension, with an all aluminum 455 small block chevy, with a dry sump and all the other good stuff, fabricated 9 inch rear housing, with the weld racing magnum 2.0 drag wheels with the spindle front mount an the double beadlock rears.

dont wanna get too into the details.

[Davidmichael]

Mine is really simple. A crew cab dually 4x4 with a 6" lift, and new 6.0 w/OD and enough time to play with it.

[StrokinRat]

Mine would be a Crew Cab shorten short bed on a half ton frame big block shaved bagged on 22's. I hope ojoe doesnt mind me posting this photoshop picture of his truck.

[mooseknuckles]

Mine would have to be a '77-'78 version of Red Rocker, except it would be orange tangello instead of red, a 502 ramjet, and a set of Billet Specialties Vintec's...........i'm thinkin' photoshop?

[texasfunk]

Originally Posted by jdurant

Well, if we are talking about dreams. I've been kicking this around in my head for awhile. I've never done the swap, or studied the earlier gen. square's core support. But I've always liked the fenders of the late models because of the point at the front, and the bumpers because they are just smoother and more aesthetic--as opposed to the older ones which seem more utilitarian. But, then I like the earlier grilles. So I've always wondered what this would look like.

Of course, if possible (and anything is possible) the core support, bumper, hood, and fenders would all have to be modified.
I wish I had the ability of a few of the guys on here!

Ahh... Dreams.

omg...i love this...

[BGRAFX]

Here a pic for you guys who like the red rocker but want to go with the earlier front clip.

[3r!c84]

okk i want

this vvvvv



with this under it vvvvv




twin turbo,six speed and ehh id be happy with the stock corvette wheels too

[WigglesTheHoly]

The one I have now with the 5.7 or lt1 and a short bed on it. but I'll take the first part and be happy

[BGRAFX]

Man that corvette is sweet!

[iroc12valve]

to DRIVE : a 78 shortbox p/t 4x4 (205) 350 mild cam(roller) edelbrock performer eps intake mild holly, mild cam stage one TH350 12 bolt posi rear 3.73 gears, stock height but level, 32's on nice aluminum wheels, headers with cherry bombs. kinda a beige/grey coulour and a leather 3pc bench seat

To SHOW/talk about/drive occasionaly: My 1991 crew with a Cummins 12V around 320 horse and 800 lbs-tq big turbo with a whine, side pipes, NV 5600 6-speed np 205/203 (doubler) ARB air lockers front/rear 5.88 gears (current d60/14 bff) 44" boggers on 8 hole m/t's. 14 " lift, quad shocks, quad steering stabilizers worm gear box from a 94-02 ram 2500(my old 97 ext cab l/b had a better turning radius than a safari ) Warn 16500 hydraulic winches front and rear. bush wacker flares, With a Pearl white paint job, lit up like a big rig, rear slider window and a different front seat than i have now lol

Not that I've thought about it lol

[Leedogg]

I want a crew cab short bed dually...cummins swap, OD trans, A/C, all power interior, 3+3 layout, layed out(with Accuair) on 22 semi's like 'Pig Rig's', Phantom front(or 73 front end), Fully finished bed floor, ported bed with subs in the bed, fiberglass tonnue(sp) cover, Black down low, w/money green metallic on the top, chrome front/rear bumpers with hiddin hitch.

[tantrumpipeline]

75 K5, camo paint, bushwacker cut outs, 44in boggers on black steel beadlocks, full roll cage, 502bb, 205/203 dual transfer setup, unimog 404's with hydraulic steering setup, one day, maybe that will be the project after my 68 hahaha

[texasfunk]

Originally Posted by BGRAFX

Man that corvette is sweet!

i bet its fast...

[nbpro]

[bigwheel15]

My dream truck and ultimate goal.