MN 1971 GMC sierra. Now parting. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fine 67 · 08-15-2010, 08:52 PM

have you sold all the linkage? for the column to the transmision and frame bracket and tranny bracket please let me know thanks shipped to 14580

*Puropedo* · 08-15-2010, 10:17 PM

Eric, how much for the 3 T-3's shipped to 93907? Are they in good shape?
Thanks.

**too much stuff** · 08-15-2010, 10:23 PM

fine67, i will look tomorrow.
puropedo, i put an ohm meter on the terminals, and they all registered. 2 have 2 prongs, and one has 3. I will try to get a pic tomorrow for you.

How about the radio with speaker, brackets and wires, headlight switch, wiper switch, and lighter all with CST knobs for $90 shipped in the U.S.

gregg72340 · 08-15-2010, 10:38 PM

Looking for a HEadlight harness if its not all cut up shipped to 19002

Thanks

**Todd68Chevy** · 08-15-2010, 11:01 PM

Eric,
If you get to pulling suspension parts or if you have another one for 71-72, I would be interested in the left lower control arm if the shipping to 47882 is not a killer. Thanks, Todd

snj8198 · 08-16-2010, 10:47 AM

Hi Eric,

I would be interested in the hood hinges and the front blinker pigtails from the core support the the housings, both sides please. Shoot me and idea on price to 59901.

Thanks, steve.

**too much stuff** · 08-16-2010, 08:07 PM

Everything is still available except the heater controls...

fine 67. $32 shipped. The trans bracket bolted on the trans is not included.
puropedo, $32 shipped for the T-3s.
gregg72340, it is in fair shape and has a repair or 2.. I cut the wire for the dual horns. $37 shipped if you still want it. That would be the whole front harness to the core support.
Todd, this thing is rusty. The less time under this truck, the better. I will be parting another 72 this fall.
snj8198, Housings and lenses look good. $35 shipped for the lenses. Hood hinges would be an extra $25

**too much stuff** · 08-16-2010, 08:14 PM

$35 shipped on the headlight bezels with screws and retainers.
$12 shipped on the clutch block-off.

O'skool 72GMC · 08-16-2010, 08:50 PM

if fine67 passes on the radio and knobs, im interested.
Thanks

gregg72340 · 08-16-2010, 08:56 PM

Quote:

Originally Posted by too much stuff

Everything is still available except the heater controls...

fine 67. $32 shipped. The trans bracket bolted on the trans is not included.
puropedo, $32 shipped for the T-3s.
gregg72340, it is in fair shape and has a repair or 2.. I cut the wire for the dual horns. $37 shipped if you still want it. That would be the whole front harness to the core support.
Todd, this thing is rusty. The less time under this truck, the better. I will be parting another 72 this fall.
snj8198, Housings and lenses look good. $35 shipped for the lenses. Hood hinges would be an extra $25

Im lookin for a clean harness I'll pass for now thanks anyway

**Todd68Chevy** · 08-16-2010, 09:30 PM

Quote:

Originally Posted by too much stuff

Everything is still available except the heater controls...

fine 67. $32 shipped. The trans bracket bolted on the trans is not included.
puropedo, $32 shipped for the T-3s.
gregg72340, it is in fair shape and has a repair or 2.. I cut the wire for the dual horns. $37 shipped if you still want it. That would be the whole front harness to the core support.
Todd, this thing is rusty. The less time under this truck, the better. I will be parting another 72 this fall.
snj8198, Housings and lenses look good. $35 shipped for the lenses. Hood hinges would be an extra $25

No problem Eric, Shipping might be to steap anyway. I am not in a hurry but I have a parts truck with a bent control arm and a good one would make the front end complete. Let me know, Todd

**too much stuff** · 08-16-2010, 10:07 PM

Quote:

Originally Posted by O'skool 72GMC

if fine67 passes on the radio and knobs, im interested.
Thanks

o'skool, I don't think anyone has asked about the radio and knobs. Let me know which package you would like. Eric

*Puropedo* · 08-16-2010, 10:55 PM

Eric, thanks for the pic, Im looking for the 3-prong bulbs with the triangle "T3' in the front, would you be willing just to sell me that single one? Also I would be interested in the the parking lamp lenses if snj8198 decides to pass, thanks.

snj8198 · 08-16-2010, 11:38 PM

Hi Eric

Sorry i miss stated my needs. I would like just the front blinker bulb sockets with the attached 2 wire pigtails running from the core support.
Puropedo is more than welcome the parking lamp lenses!

And i would like the hood hinges for $25 as you stated. Thats great!

Thanks Eric. -steve

**too much stuff** · 08-16-2010, 11:51 PM

snj. Steve, If i can split them up and sell part to you and part to puropedo, i will do that. Otherwise it would be easier to sell as a unit like i pulled them. The $25 for the hinges was for if i was shipping the turn signal housing already. I will still go for $25, but will need shipping also. Hope this makes sense. Eric

huero · 08-17-2010, 12:00 AM

How much for the outside heater box? No blower, no heater core, no inside box, just the outside box. As long as there are no cracks where the box mounts to the firewall?
Shipped to 90807 thanks,
huero.

**too much stuff** · 08-17-2010, 12:05 AM

Huero, i will check it over tomorrow...

67gmcstepside · 08-17-2010, 07:29 AM

Need the distributor, coil and bracket until I get cash for a HEI. Would you part with them?

**too much stuff** · 08-17-2010, 08:36 AM

Quote:

Originally Posted by 67gmcstepside

Need the distributor, coil and bracket until I get cash for a HEI. Would you part with them?

Keeping the engine complete for now. I have a couple of dist. here. I can check tonight for you.

67gmcstepside · 08-17-2010, 08:46 AM

Quote:

Originally Posted by too much stuff

Keeping the engine complete for now. I have a couple of dist. here. I can check tonight for you.

Thanks, just need something to get the engine running.

**too much stuff** · 08-17-2010, 08:03 PM

***** TRUCK IS SOLD *****
Sold the truck locally tonight. Anything that has been listed or spoken for is fine. I am not pulling anymore parts other than what is listed. If you have asked about a part, it will be fine until tomorrow night. Anything unclaimed by then will go with the truck, so speak up. Thanks, Eric

snj8198 · 08-17-2010, 11:02 PM

Hi Eric,

are we still on for the hood hinges and blinker wiring? If so how would you like payment? I spoke with puropedo lastnight and he was interested in the housings if i took the pigtail wires. -steve

**too much stuff** · 08-18-2010, 08:50 AM

Heater control is gone and drivers eyebrow is pending. All other parts pulled already are still up for grabs...

**too much stuff** · 08-18-2010, 07:02 PM

Almost last call on this one... (just the parts already pulled)

Field and Son · 08-18-2010, 07:05 PM

Eric,

If the gauge cluster is up to me I will still take it...Jay

08-15-2010, 08:52 PM	#26
fine 67 Junior Member Join Date: Jun 2001 Location: webster,n.y.,usa Posts: 127	Re: 1971 GMC sierra. Now parting. have you sold all the linkage? for the column to the transmision and frame bracket and tranny bracket please let me know thanks shipped to 14580

08-15-2010, 10:17 PM	#27
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: 1971 GMC sierra. Now parting. Eric, how much for the 3 T-3's shipped to 93907? Are they in good shape? Thanks.

08-15-2010, 10:23 PM	#28
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 1971 GMC sierra. Now parting. fine67, i will look tomorrow. puropedo, i put an ohm meter on the terminals, and they all registered. 2 have 2 prongs, and one has 3. I will try to get a pic tomorrow for you. How about the radio with speaker, brackets and wires, headlight switch, wiper switch, and lighter all with CST knobs for $90 shipped in the U.S. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-15-2010, 10:38 PM	#29
gregg72340 Registered User Join Date: May 2010 Location: ambler, pa Posts: 325	Re: 1971 GMC sierra. Now parting. Looking for a HEadlight harness if its not all cut up shipped to 19002 Thanks __________________ Just would like the snow to stop so I can actually work on my truck!!!!!!!!!!!

08-15-2010, 11:01 PM	#30
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: 1971 GMC sierra. Now parting. Eric, If you get to pulling suspension parts or if you have another one for 71-72, I would be interested in the left lower control arm if the shipping to 47882 is not a killer. Thanks, Todd __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

08-16-2010, 10:47 AM	#31
snj8198 Registered User Join Date: Feb 2007 Location: Star Valley, WY Posts: 2,038	Re: 1971 GMC sierra. Now parting. Hi Eric, I would be interested in the hood hinges and the front blinker pigtails from the core support the the housings, both sides please. Shoot me and idea on price to 59901. Thanks, steve. __________________ Steve 1971 GMC Longbox. Full Roller Stroker 489 w/ FiTech EFI, Chris Straub Cam/NV4500/205/D60/14B w. Grizzly Locker and 4.11's. 2" Lift on 33's

08-16-2010, 08:07 PM	#32
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 1971 GMC sierra. Now parting. Everything is still available except the heater controls... fine 67. $32 shipped. The trans bracket bolted on the trans is not included. puropedo, $32 shipped for the T-3s. gregg72340, it is in fair shape and has a repair or 2.. I cut the wire for the dual horns. $37 shipped if you still want it. That would be the whole front harness to the core support. Todd, this thing is rusty. The less time under this truck, the better. I will be parting another 72 this fall. snj8198, Housings and lenses look good. $35 shipped for the lenses. Hood hinges would be an extra $25 Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-16-2010, 08:14 PM	#33
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 1971 GMC sierra. Now parting. $35 shipped on the headlight bezels with screws and retainers. $12 shipped on the clutch block-off. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-16-2010, 08:50 PM	#34
O'skool 72GMC Registered User Join Date: Jan 2002 Location: San Diego, CA, USA Posts: 250	Re: 1971 GMC sierra. Now parting. if fine67 passes on the radio and knobs, im interested. Thanks

08-16-2010, 10:55 PM	#38
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: 1971 GMC sierra. Now parting. Eric, thanks for the pic, Im looking for the 3-prong bulbs with the triangle "T3' in the front, would you be willing just to sell me that single one? Also I would be interested in the the parking lamp lenses if snj8198 decides to pass, thanks.

08-16-2010, 11:38 PM	#39
snj8198 Registered User Join Date: Feb 2007 Location: Star Valley, WY Posts: 2,038	Re: 1971 GMC sierra. Now parting. Hi Eric Sorry i miss stated my needs. I would like just the front blinker bulb sockets with the attached 2 wire pigtails running from the core support. Puropedo is more than welcome the parking lamp lenses! And i would like the hood hinges for $25 as you stated. Thats great! Thanks Eric. -steve __________________ Steve 1971 GMC Longbox. Full Roller Stroker 489 w/ FiTech EFI, Chris Straub Cam/NV4500/205/D60/14B w. Grizzly Locker and 4.11's. 2" Lift on 33's

08-16-2010, 11:51 PM	#40
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 1971 GMC sierra. Now parting. snj. Steve, If i can split them up and sell part to you and part to puropedo, i will do that. Otherwise it would be easier to sell as a unit like i pulled them. The $25 for the hinges was for if i was shipping the turn signal housing already. I will still go for $25, but will need shipping also. Hope this makes sense. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-17-2010, 12:00 AM	#41
huero 1969 Short, Fleet, and Beat Join Date: Apr 2007 Location: Long Beach, Ca. Posts: 867	Re: 1971 GMC sierra. Now parting. How much for the outside heater box? No blower, no heater core, no inside box, just the outside box. As long as there are no cracks where the box mounts to the firewall? Shipped to 90807 thanks, huero.

08-17-2010, 12:05 AM	#42
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 1971 GMC sierra. Now parting. Huero, i will check it over tomorrow... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-17-2010, 07:29 AM	#43
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: 1971 GMC sierra. Now parting. Need the distributor, coil and bracket until I get cash for a HEI. Would you part with them?



Register or Log In To remove these advertisements.

08-17-2010, 08:03 PM	#46
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 1971 GMC sierra. Now parting. *** TRUCK IS SOLD *** Sold the truck locally tonight. Anything that has been listed or spoken for is fine. I am not pulling anymore parts other than what is listed. If you have asked about a part, it will be fine until tomorrow night. Anything unclaimed by then will go with the truck, so speak up. Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-17-2010, 11:02 PM	#47
snj8198 Registered User Join Date: Feb 2007 Location: Star Valley, WY Posts: 2,038	Re: 1971 GMC sierra. Now parting. Hi Eric, are we still on for the hood hinges and blinker wiring? If so how would you like payment? I spoke with puropedo lastnight and he was interested in the housings if i took the pigtail wires. -steve __________________ Steve 1971 GMC Longbox. Full Roller Stroker 489 w/ FiTech EFI, Chris Straub Cam/NV4500/205/D60/14B w. Grizzly Locker and 4.11's. 2" Lift on 33's

08-18-2010, 08:50 AM	#48
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 1971 GMC sierra. Now parting. Heater control is gone and drivers eyebrow is pending. All other parts pulled already are still up for grabs... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-18-2010, 07:02 PM	#49
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 1971 GMC sierra. Now parting. Almost last call on this one... (just the parts already pulled) __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-18-2010, 07:05 PM	#50
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: 1971 GMC sierra. Now parting. Eric, If the gauge cluster is up to me I will still take it...Jay

Register or Log In To remove these advertisements.