OR Parting out 1970 GMC C10 350,TH350, 3.73

[gm71jimmy]

Interested in front bumper and front fender eyebrows price pending shipping and condition. Shipping to NV 89040 Thanks

[Rochlow]

Fan shroud shipped to 05478.

What are you looking to get for the hubcaps?

[tll74]

Originally Posted by neo1370

are the front leaf spring hangers off the rear end any good?

Yes they are. They are now on the list @ 40.00 plus 12.50 shipping.

[mo]

interested in he tailgate upper and lower trim as well as the tail light mouldings pending pics to 93013
thanks

[tll74]

Originally Posted by FL71C10

I'd be interested in all of the pulleys, brackets, and water pump from the front of the motor so I can change my motor over from lonmg wp to short wp.
Pending price, pictures, and shipping.

I have listed and priced all the pieces you asked about. Did you need a p/s pump and p/s (crank) pulley as well? If so I have an extra for 65.00. So...120.00 plus 25.00 shipping to FL for the following:
upper pulley
lower pulley
p/s crank pulley
alt brackets
p/s pump complete
all original bolts to mount

Pics coming soon.

Thanks, Tom

[Solego]

Will you be keeping the frame? I need the rear most crossmember.

[tll74]

projectjimmy68: the lines are shot, sorry

Cisco714: shipping to 92801 26.00

Rochlow: shipping to 30196 19.00, hub caps are decent driver qaulity 30.00
plus 10.00 shipping

Tommy454: mirror pics as requested the mirror heads are not exact matches but very close. You have to look hard to see the difference.

jmedero: shipping to 32571 47.50, this a driver qaulity only.

[tll74]

Originally Posted by Solego

Will you be keeping the frame? I need the rear most crossmember.

I'll sell any part or portion of the frame. That cross member 35.00 plus 17.00 shipping to FL.

[Solego]

$25 + shipping. Are you able to take a pic of it yet

[tll74]

more pics as requested

mo: LH tail lamp trim nice driver minor ding on outside edge. 10.00 plus, LH upper tailgate nice driver no dings 15.00. RH upper dented free with something else, center piece minor pits from age. 15.00 plus. lower trim dented LH side. 5.00 plus

gm71jimmy: RH eyebrow looks nice other than some surface rust the LH has a dent down low and surface rust. Would clean up for a driver only, RH 15.00
LH 10.00 plus. Shipping on bumper 35.00 to NV. could include the eyebrows with the bumper.

[tll74]

Originally Posted by Solego

$25 + shipping. Are you able to take a pic of it yet

Are you offering 25.00?

[tll74]

Short water pump change over pics for FL71C10.

Fan shroud pic for Rochlow.

[Solego]

Originally Posted by tll74

Are you offering 25.00?

I was, but, I'll wait. I don't want you to go to the trouble of pulling it apart. If you get that far in the course of parting it out, get a better look at it and put some pics up. Shoot me a PM to let you know you put the pics up. Don't hold it for me if you get an offer on the whole frame, though. Thanx!

[Davedr]

Can i get better pics of the Power Booster? Is it in good condition? How much shipped to 75236?

[70cst]

Originally Posted by tll74

All prices are plus shipping. I will ship anything listed. Hot tanking and acid dipping available. Hope to have this truck fully dismantled this weekend. Pics to follow. Combined shipping no problem. Package deal prices ok (pending board rules). Thanks, Tom

Front bumper driver only 50.00
Grill not perfect but nice driver 150.00
head lamp bezel RH 20.00
headlamp bezel LH 20.00
RH turn lens 15.00
LH turn lens 15.00
core support 125.00
RH fender bare 175.00
LH fender bare 175.00
Box random dings surface rust 650.00
cab low hump typical rocker cancer bare 250.00
Hood hindges tight and works nice 20.00 each
LH door shell, solid 150.00
tailgate nice inside 3hrs outside
LH inner fender 65.00
mirrors pair only 50.00 original??
Seat nice recover cloth with original center panels 225.00 SOLD locally
seat belts complete 75.00
LH door panel 50.00
RH door panel damaged pic to come 15.00
arm rest pair 25.00
sun visors 20.00 each
heater control missing top lever 20.00
LH chrome vent assy 35.00
RH chrome vent assy 35.00
LH door latch 25.00
RH door latch 25.00
LH window reg. 20.00
RH window reg. 20.00
LH outside door handle 15.00
RH outside door handle 15.00
rear slider window 45.00
AM Radio 50.00
speedo cluster basic with gauges 40.00
steering column at NOT tilt 75.00
under dash wiring 50.00
power brake booster complete 75.00
4 core rad brackets all 4 pieces 35.00
fan shroud minnor blemish on top 40.00
new HEI just installed, didn't cure bent valves, 75.00
alt brackets 20.00
water pump pulley 10.00
crank pulley 15.00
short water pump 10.00
power steering pump, gear, hoses, crank pulley complete change over 150.00
carb pre heat tube and sheild on LH manifold 65.00
air cleaner with spacer and hose 45.00
engine wiring harness 50.00
fan blade clutch type 20.00
fan clutch 20.00
shift linkage complete 40.00
transmission cross member 40.00
sb engine stands 35.00
firewall side heater housing 25.00
3.73 NL leaf spring rear end 225.00
TH350 6" tail works fine been rebuilt 200.00
front sway bar with all brackets 65.00
forward spring hanger brackets R & L 40.00
All misc parts will be gathered, pictured and priced after disassembly.

Thanks for pricing the parts. Greatly appreciated.

[sjarrett71]

How much for the Th350 slip yoke shipped to Rolla, MO 65401?

[Cisco714]

Ill take the rear sliding window.. 45.00 for window plus 26.00 for shipping= 71.00 Thanks, PM sent.

[tll74]

Solego: This truck will be stripped down to bare frame over the weekend. I have already posted picks on post #36. Should you decide it would ship as early as monday. I would let it go for 30.00 plus.

Davedr: pics to come Friday, It looks and works perfectly fine. It has been painted black. The prior owner said he recently replaced it.

sjarrett71: TH350 slip yoke 32.00 shipped

Cisco714: PM sent back and thanks!

70cst: Thanks, I was working on the list from the beginning just took me awhile. It won't happen again! I thought maybe I was going to the board Jail for a bit.

[Solego]

When you get it stripped down to the frame, take some better pics for me.

Thanx!

[crig39]

what does the manifolds look like I am interested in the carb, heat tube, heat shield, and manifolds if they are desent. Carl

[FL71C10]

I'll pass on the ps pump, etc

[jmedero]

Any chance for picture of frt bumper?
Posted via Mobile Device

[oldblue1968chevy]

I am interested in the antenna if its driver quality original. The end that plugs into the radio needs to be intact also. If its all good price to 37357?
Thanks!

[tll74]

Davedr: got the booster off today and forgot the camera at home. Pics to come tomorrow.

crig39: The rh manifold was cracked, but I do have another to check tomorrow. The lh looks fine. The heat sheild is in excellent condition except for one of the two screw holes for the heat tube has had a bigger screw in it. The carb decoded to be 69 Corvette 350 HP 350 or a 68 Nova 327 325 HP so I will probably put it on Ebay. Pics coming tomorrow.

jmedero: Forgot the camera at home. Pics to follow tomorrow.

oldblue1968chevy: Sorry, it is junk!

[denny5625]

You still have the rearend? Thanks.