project "never enough" - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

belowme51 · 05-03-2011, 12:45 PM

here is some more progress.

**67cheby** · 05-03-2011, 12:50 PM

nice

belowme51 · 05-03-2011, 12:59 PM

dont forgett the front and the roller..waiting on a front body drop piece and accuair at this point.

belowme51 · 05-03-2011, 01:06 PM

4 countersunk grade 8 hardware solves the rear x-member bottom bolt issue. now the frame is flat. and of course big thanks to Nate at Porterbuilt. that plaque will be incorporated into the build as well

TruAggression · 05-03-2011, 02:45 PM

Mike, don't forget the rear end that put you out of commission and the stiches involved with your finger haha!!!!! "Take my good hand child"!!!!!! Haha, gotta give you a hard time bro you know me!!!! But it is looking good just let me know when the other stuff comes in.....I'll be there to help out on the build and then we can start on my bread-box right???!!!

**67cheby** · 05-03-2011, 03:11 PM

SHOW OFF.....i wish i was important enough to get one of those plaques......sigh....

belowme51 · 05-03-2011, 03:50 PM

Quote:

Originally Posted by TruAggression

Mike, don't forget the rear end that put you out of commission and the stiches involved with your finger haha!!!!! "Take my good hand child"!!!!!! Haha, gotta give you a hard time bro you know me!!!! But it is looking good just let me know when the other stuff comes in.....I'll be there to help out on the build and then we can start on my bread-box right???!!!

lol...yeah the stitches suck! i lost alot of feeling in my finger....gotta love nerve damage. ill need some help definetly. thank god it wasnt my pimp hand..definetly ready to help you whenever.

belowme51 · 05-03-2011, 03:52 PM

Quote:

Originally Posted by 67cheby

SHOW OFF.....i wish i was important enough to get one of those plaques......sigh....

lol, just ask nate. but you can borrow mine if ya wanna lol

**67cheby** · 05-03-2011, 03:56 PM

I HAVE ASKED ABOUT 2 DOZEN TIMES........ i am just not special enough .....

belowme51 · 05-03-2011, 04:01 PM

im sorry brother

**67cheby** · 05-03-2011, 04:02 PM

ya....it's lonely down here at the bottom where you get no love .........LOL

belowme51 · 05-03-2011, 04:11 PM

Quote:

Originally Posted by 67cheby

ya....it's lonely down here at the bottom where you get no love .........LOL

coming from someone who created some bad a** fenders....im sure you get alot of love..lol...i wonder how many "sponsored"sets have been asked for. lol

**67cheby** · 05-03-2011, 04:14 PM

LOL....i am sure it's coming....

belowme51 · 05-03-2011, 06:57 PM

well I hope you get yours soon too. Im gonna put mine in the headlinder or the notch cover will have it frenched in, havent got to that point yet so not sure yet. but this is gonna be my dd so it will make a good conversation piece. The notch cover will open up to access all the Accuair plumbing and to showcase all the Porterbuilt goodies. As soon as I get the sway bar and the front body drop parts installed I will be able to move onto plumbing when I do the Accuair set up...The wheels on the first page are a no go and for sale due to the company going out of business. they were Agio Sport Thirteens. So Billet Specialties or Bonspeed are in order...Would love to see some 6 lug billets on these trucks bagged not very many seeing that all do 5 lug conversions. Feel free to post em up if you got em. 22 fr and rr or 20/22 combos

**67cheby** · 05-03-2011, 07:03 PM

mine are Budnik 20's and 22's

jasonhall · 05-03-2011, 09:34 PM

Frame and truck look great! cant wait to see progress on this one!

belowme51 · 05-04-2011, 10:13 AM

Quote:

Originally Posted by jasonhall

Frame and truck look great! cant wait to see progress on this one!

Thank you very much.

belowme51 · 05-10-2011, 07:17 PM

got my front Body Drop mounts today!!! ill install them tommorow with pics to follow. Thank you Nate

**67cheby** · 05-11-2011, 11:04 AM

hurry up we want to see !! LOL

belowme51 · 05-11-2011, 03:11 PM

here ya go cheby. got one side done...super easy.

**67cheby** · 05-11-2011, 04:03 PM

LOL.....you are FAST !!! looks great

belowme51 · 05-12-2011, 12:01 PM

yeah im super happy to have those on. I need to test fit the front clip and bumper so see if I want to bring the bumper in some more or adjust as needed, that the beauty of this piece.

belowme51 · 06-13-2011, 03:38 PM

well while im waiting on my rear end...lol to be narrowed 2" I got some goodies in the mail. My Fessler Billet tail lights, these things are awesome they have a glass face to them with the reflector behind and they will have some sequential led's with them. Aslo got my Accuair E-Level set up. I also got my new frame x-member in from Nathan for the Body Drop. Big thanks to Nate for all the help as everything has been bought thru his company. Waiting on my sway bar to show up too but shall be working away on mounting this beautiful stuff.

**67cheby** · 06-13-2011, 04:01 PM

man those taillights....are BADDD

belowme51 · 06-13-2011, 05:10 PM

Quote:

Originally Posted by 67cheby

man those taillights....are BADDD

thanks man. Ive had them for a year now but forgott all about them. got them at the super chevy show in vegas here last year and have never mounted them yet but cant wait.....now I need to figure out where I should mount my tanks and comps as well as all the accuair stuff.. driving me nuts...ideas are appreciated. N2billet gave me a great Idea for the sensors but I need to figure out the rest.

05-03-2011, 12:45 PM	#26
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: project "never enough" here is some more progress. Attached Images Last edited by belowme51; 05-03-2011 at 12:52 PM. Reason: pics

05-03-2011, 12:50 PM	#27
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: project "never enough" nice __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-03-2011, 12:59 PM	#28
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: project "never enough" dont forgett the front and the roller..waiting on a front body drop piece and accuair at this point. Attached Images

05-03-2011, 01:06 PM	#29
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: project "never enough" 4 countersunk grade 8 hardware solves the rear x-member bottom bolt issue. now the frame is flat. and of course big thanks to Nate at Porterbuilt. that plaque will be incorporated into the build as well Attached Images

05-03-2011, 02:45 PM	#30
TruAggression Registered User Join Date: Aug 2010 Location: Las Vegas,NV Posts: 118	Re: project "never enough" Mike, don't forget the rear end that put you out of commission and the stiches involved with your finger haha!!!!! "Take my good hand child"!!!!!! Haha, gotta give you a hard time bro you know me!!!! But it is looking good just let me know when the other stuff comes in.....I'll be there to help out on the build and then we can start on my bread-box right???!!!

05-03-2011, 03:11 PM	#31
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: project "never enough" SHOW OFF.....i wish i was important enough to get one of those plaques......sigh.... __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-03-2011, 03:56 PM	#34
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: project "never enough" I HAVE ASKED ABOUT 2 DOZEN TIMES........ i am just not special enough ..... __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-03-2011, 04:01 PM	#35
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: project "never enough" im sorry brother

05-03-2011, 04:02 PM	#36
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: project "never enough" ya....it's lonely down here at the bottom where you get no love .........LOL __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-03-2011, 04:14 PM	#38
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: project "never enough" LOL....i am sure it's coming.... __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-03-2011, 06:57 PM	#39
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: project "never enough" well I hope you get yours soon too. Im gonna put mine in the headlinder or the notch cover will have it frenched in, havent got to that point yet so not sure yet. but this is gonna be my dd so it will make a good conversation piece. The notch cover will open up to access all the Accuair plumbing and to showcase all the Porterbuilt goodies. As soon as I get the sway bar and the front body drop parts installed I will be able to move onto plumbing when I do the Accuair set up...The wheels on the first page are a no go and for sale due to the company going out of business. they were Agio Sport Thirteens. So Billet Specialties or Bonspeed are in order...Would love to see some 6 lug billets on these trucks bagged not very many seeing that all do 5 lug conversions. Feel free to post em up if you got em. 22 fr and rr or 20/22 combos

05-03-2011, 07:03 PM	#40
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: project "never enough" mine are Budnik 20's and 22's Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-03-2011, 09:34 PM	#41
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: project "never enough" Frame and truck look great! cant wait to see progress on this one!

05-10-2011, 07:17 PM	#43
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: project "never enough" got my front Body Drop mounts today!!! ill install them tommorow with pics to follow. Thank you Nate

05-11-2011, 11:04 AM	#44
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: project "never enough" hurry up we want to see !! LOL __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

05-11-2011, 03:11 PM	#45
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: project "never enough" here ya go cheby. got one side done...super easy. Attached Images

05-11-2011, 04:03 PM	#46
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: project "never enough" LOL.....you are FAST !!! looks great __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-12-2011, 12:01 PM	#47
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: project "never enough" yeah im super happy to have those on. I need to test fit the front clip and bumper so see if I want to bring the bumper in some more or adjust as needed, that the beauty of this piece.

06-13-2011, 03:38 PM	#48
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: project "never enough" well while im waiting on my rear end...lol to be narrowed 2" I got some goodies in the mail. My Fessler Billet tail lights, these things are awesome they have a glass face to them with the reflector behind and they will have some sequential led's with them. Aslo got my Accuair E-Level set up. I also got my new frame x-member in from Nathan for the Body Drop. Big thanks to Nate for all the help as everything has been bought thru his company. Waiting on my sway bar to show up too but shall be working away on mounting this beautiful stuff. Attached Images

06-13-2011, 04:01 PM	#49
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: project "never enough" man those taillights....are BADDD __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Register or Log In To remove these advertisements.