Seats Q?

[1tonchevy]

Originally Posted by Captkaos

FYI, for pickups if you want buckets, get them out of a Suburban and remove the inner floor mount (it is tacked on) bend the rear seat mount brackets and it will bolt in once you weld the inner mount back on.

Would love burban buckets but thats like finding gold around here hard enough to find a CC let alone a burban.

[mitch1965]

I couldn't get any decent pictures of the seat mounts I made. I welded up a rectangular frame from 1x1 with tabs. This tied both sides of th e60/40 bench together. I then figured out just where I wanted the forward/rear movement of the seat to be for adjustability, and added tabs to mate to the original '85 seat slides. Weld it all together, paint it, bolt on the seat, and done.

[pvkj454]

Originally Posted by MARKDTN

I have an 88-99 bench seat in mine. Used the original tracks and just drilled new holes in the seat. As close to a bolt-in as you could ask for. It is much more comfortable than the original. I am 6'1"

I have a 96 Silverado bench in mine and would go back with the same thing if I built another truck. I forgot how uncomfortable the original seats are until lately I have been working on a truck with a stock seat.