VA FREE PARTS Large pickup only - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 03-07-2011, 09:43 AM

We'll see what Jim needs/wants first. I could use some rear parts but would help just clear things out and see what I can do with it all.

**va72longhorn** · 03-07-2011, 12:17 PM

Bill, do you have any passenger doors with the window hardware still intact? Especially a chrome vent window? Wouldnt mind finding a higher geared rear as well. Need to get with you on releasing a majority of that order this week too.

Bishops Trucks · 03-07-2011, 05:05 PM

Thanks Tim, I don't want much as storage at my house is pretty slim with 3 trucks. 2 cars and a van in the driveway. I'll be looking at a couple doors and a couple fenders if they are available. Maybe some bed parts if he has some.

pickupman · 03-07-2011, 08:21 PM

no doors with chrome vent wds in it, tim sure there will be plenty left. Jim not much left of the ole 68 parts truck, but you can bring that ochre one up and I can part it for you, got an empty bay I can work on it in

Tacolite · 03-07-2011, 08:53 PM

Quote:

Originally Posted by 1969stepside

any left stepside fenders?

I have step side fenders
Posted via Mobile Device

ECU PIRATE · 03-08-2011, 07:41 PM

Bill........ I am interested in some 1/2 ton 4wd rears if you have any left. Looking for a set to put under s frame I just picked up. I gather you are around this Saturday? I can drive out after I drop a load of scrap off in manassas.

Mike

pickupman · 03-08-2011, 09:13 PM

Mike, I am not for sure that I have a matched set of rears. I know I have rears just not a matched set. Yes I will be here sat 9-4

ECU PIRATE · 03-08-2011, 09:20 PM

Thanks bill. Do you have an address for me? I can probably be there about 9:30. I don't care about the being a matched set. As long as I can get a front and a rear, I will be happy. Going to re gear them anyway.

pickupman · 03-08-2011, 09:31 PM

461 Rocky Lane
Front Royal, Va 22630
540-636-7405

WV72 · 03-08-2011, 10:42 PM

Hey Bill, I wanted to thank you again for the door. hope you are doing well.

Bishops Trucks · 03-11-2011, 08:46 PM

Be there at 9 am Bill, I'll take my steak med rare and my eggs over med.

pickupman · 03-11-2011, 11:05 PM

Jim, will be here,sorry just forgot to stop and get the steak n eggs, you better go ahead and stop by mcdonalds and pick your breakfast up, or you will go hungry, unless you want to stop by first with your pocket full of money then we can go get some.

ECU PIRATE · 03-12-2011, 11:53 AM

[QUOTE=pickupman;4539701]Mike, I am not for sure that I have a matched set of rears. I know I have rears just not a matched set. Yes I will be here sat 9-4[/QUOTE
Bill,

A pleasure to meet you this morning. Many thanks for the fender. It will go to good use. I will come back (probably 2nd weekend in April) and pick up those 1/2 ton rears off the 86' we talked about this morning if you can hold on to them for me (and maybe an extra fender or two if some are still available. I was going to bring a buddy with me this morning but, his wife had plans for him.

Thanks again,

Mike
(703) 984-9879

pickupman · 03-12-2011, 02:38 PM

Nice to meet you to MIke. Be glad to hold the rears for you. Just bring you some help, lol. I will be out of town april 6-12 but just check with me before you come,
Thanks, Bill

ECU PIRATE · 03-12-2011, 05:08 PM

Thanks Bill. I am the a^%hole who showed up still thinking I was 18 instead of months shy of 40........... I am realizing now that I can't muscle or man handle things like I used to..... I will give you a shout mid 3rd week in April. This time, I am bringing my engine hoist, my best buddy, and (2) trucks.............hopefully, I don't throw out my back....lol I also need to see about getting some bed side patch patch panels (full wheel arch) for my 82................... I have that 396 that I am thinking about putting on this 77' 4wd frame. I need a transfer case too if you have a spare laying around.............the only automatic I will ever have again will be my DD...........all of my toys are going to be manual..........

Mike

JJchamp48 · 03-13-2011, 01:35 AM

Do you have an idea of what you have left that's available?

pickupman · 03-13-2011, 02:37 PM

I have lots of hoods, couple RH doors, LH Fenders, few 4wd 1/2 ton rears, misc rears, couple GMC Radiator supports, all parts need work, but were good enough not to toss over the years

ECU PIRATE · 04-01-2011, 04:46 PM

Quote:

Originally Posted by pickupman

Nice to meet you to MIke. Be glad to hold the rears for you. Just bring you some help, lol. I will be out of town april 6-12 but just check with me before you come,
Thanks, Bill

Bill,

I am planning on making it back down on the 16th of April with some help to pick up the rears. I hope you have a good time on your vacation. Thanks again,

Mike

pickupman · 04-01-2011, 09:45 PM

Sounds good, we will see you then

ECU PIRATE · 04-29-2011, 12:00 PM

Bill,

Still have any transmissions you are looking to part with or any transfer cases? I guess I will check wiht you in the morning when I come out. Looking for an SM420 or SM465 with a NP203 or NP205 transfer case.

Mike

pickupman · 04-29-2011, 03:01 PM

Mike, PM Sent

WV72 · 04-29-2011, 03:07 PM

Mike, Do you know if you happen to have a 400 turbo?

03-07-2011, 09:43 AM	#26
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: FREE PARTS Large pickup only We'll see what Jim needs/wants first. I could use some rear parts but would help just clear things out and see what I can do with it all. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-07-2011, 12:17 PM	#27
va72longhorn Senior Member Join Date: Dec 2009 Location: Culpeper, VA Posts: 432	Re: FREE PARTS Large pickup only Bill, do you have any passenger doors with the window hardware still intact? Especially a chrome vent window? Wouldnt mind finding a higher geared rear as well. Need to get with you on releasing a majority of that order this week too.

03-07-2011, 05:05 PM	#28
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: FREE PARTS Large pickup only Thanks Tim, I don't want much as storage at my house is pretty slim with 3 trucks. 2 cars and a van in the driveway. I'll be looking at a couple doors and a couple fenders if they are available. Maybe some bed parts if he has some. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

03-07-2011, 08:21 PM	#29
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Re: FREE PARTS Large pickup only no doors with chrome vent wds in it, tim sure there will be plenty left. Jim not much left of the ole 68 parts truck, but you can bring that ochre one up and I can part it for you, got an empty bay I can work on it in __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-08-2011, 07:41 PM	#31
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: FREE PARTS Large pickup only Bill........ I am interested in some 1/2 ton 4wd rears if you have any left. Looking for a set to put under s frame I just picked up. I gather you are around this Saturday? I can drive out after I drop a load of scrap off in manassas. Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

03-08-2011, 09:13 PM	#32
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Re: FREE PARTS Large pickup only Mike, I am not for sure that I have a matched set of rears. I know I have rears just not a matched set. Yes I will be here sat 9-4 __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-08-2011, 09:20 PM	#33
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: FREE PARTS Large pickup only Thanks bill. Do you have an address for me? I can probably be there about 9:30. I don't care about the being a matched set. As long as I can get a front and a rear, I will be happy. Going to re gear them anyway. __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

03-08-2011, 09:31 PM	#34
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Re: FREE PARTS Large pickup only 461 Rocky Lane Front Royal, Va 22630 540-636-7405 __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-08-2011, 10:42 PM	#35
WV72 Registered User Join Date: Nov 2010 Location: Kearneysville WV Posts: 90	Re: FREE PARTS Large pickup only Hey Bill, I wanted to thank you again for the door. hope you are doing well.

03-11-2011, 08:46 PM	#36
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: FREE PARTS Large pickup only Be there at 9 am Bill, I'll take my steak med rare and my eggs over med. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

03-11-2011, 11:05 PM	#37
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Re: FREE PARTS Large pickup only Jim, will be here,sorry just forgot to stop and get the steak n eggs, you better go ahead and stop by mcdonalds and pick your breakfast up, or you will go hungry, unless you want to stop by first with your pocket full of money then we can go get some. __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-12-2011, 11:53 AM	#38
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: FREE PARTS Large pickup only [QUOTE=pickupman;4539701]Mike, I am not for sure that I have a matched set of rears. I know I have rears just not a matched set. Yes I will be here sat 9-4[/QUOTE Bill, A pleasure to meet you this morning. Many thanks for the fender. It will go to good use. I will come back (probably 2nd weekend in April) and pick up those 1/2 ton rears off the 86' we talked about this morning if you can hold on to them for me (and maybe an extra fender or two if some are still available. I was going to bring a buddy with me this morning but, his wife had plans for him. Thanks again, Mike (703) 984-9879 __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold) Last edited by ECU PIRATE; 03-12-2011 at 11:53 AM.

03-12-2011, 02:38 PM	#39
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Re: FREE PARTS Large pickup only Nice to meet you to MIke. Be glad to hold the rears for you. Just bring you some help, lol. I will be out of town april 6-12 but just check with me before you come, Thanks, Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-12-2011, 05:08 PM	#40
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: FREE PARTS Large pickup only Thanks Bill. I am the a^%hole who showed up still thinking I was 18 instead of months shy of 40........... I am realizing now that I can't muscle or man handle things like I used to..... I will give you a shout mid 3rd week in April. This time, I am bringing my engine hoist, my best buddy, and (2) trucks.............hopefully, I don't throw out my back....lol I also need to see about getting some bed side patch patch panels (full wheel arch) for my 82................... I have that 396 that I am thinking about putting on this 77' 4wd frame. I need a transfer case too if you have a spare laying around.............the only automatic I will ever have again will be my DD...........all of my toys are going to be manual.......... Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold) Last edited by ECU PIRATE; 03-12-2011 at 05:09 PM.

03-13-2011, 01:35 AM	#41
JJchamp48 Registered User Join Date: Oct 2010 Location: Tyro, VA Posts: 209	Re: FREE PARTS Large pickup only Do you have an idea of what you have left that's available?



Register or Log In To remove these advertisements.

03-13-2011, 02:37 PM	#42
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Re: FREE PARTS Large pickup only I have lots of hoods, couple RH doors, LH Fenders, few 4wd 1/2 ton rears, misc rears, couple GMC Radiator supports, all parts need work, but were good enough not to toss over the years __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

04-01-2011, 09:45 PM	#44
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Re: FREE PARTS Large pickup only Sounds good, we will see you then __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

04-29-2011, 12:00 PM	#45
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: FREE PARTS Large pickup only Bill, Still have any transmissions you are looking to part with or any transfer cases? I guess I will check wiht you in the morning when I come out. Looking for an SM420 or SM465 with a NP203 or NP205 transfer case. Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

04-29-2011, 03:01 PM	#46
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Re: FREE PARTS Large pickup only Mike, PM Sent __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

04-29-2011, 03:07 PM	#47
WV72 Registered User Join Date: Nov 2010 Location: Kearneysville WV Posts: 90	Re: FREE PARTS Large pickup only Mike, Do you know if you happen to have a 400 turbo?

Register or Log In To remove these advertisements.