MN WTB: 67 GMC sheetmetal, emblem, tailgate - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 02-15-2011, 01:50 AM

Eric, thanks for the pics. What is the stud spacing on the back of that custom script emblem you have?

Vintage Windmills · 02-20-2011, 02:44 PM

Quote:

Originally Posted by teeitup

Jud, I know I'm a ways away from you but there is a 67 gmc with a 351V6, AC, PS on Topeka Craigslist listed on 1/7/11, asking $1500 but I think they take $1200 or maybe even less. I have not seen this truck in person but if you were real interested I could go look at it for you.

Randy, I just got a message from him saying the buyer backed out afterall! He is going to send me some pics tonight and if it looks decent, was thinking maybe you could give it an inspection?

Jud

teeitup · 02-20-2011, 02:56 PM

Jud, I should have time sometime this coming week, just let me know. Randy

Vintage Windmills · 03-01-2011, 06:08 PM

Randy, Thanks again for looking at it for me. Sure was nice visiting with you on the phone too. I am still thinking on the truck, its too bad the condition isn't better on the body panels, even though there are a couple other useable parts.

In the meantime, anything new out there for '67 GMC Parts that may be a better route for me to take?? Complete parts trucks considered too.

Leroy-B1 · 03-02-2011, 12:03 AM

I've got a chrome 67 gmc grille will get pics if interested

Vintage Windmills · 03-02-2011, 12:25 AM

Yes, I'd like pics. Assuming its in good shape please post some.

Leroy-B1 · 03-02-2011, 11:05 AM

will get some today and post tonight.... Here are some pics, has one small ding above the G

Leroy-B1 · 03-02-2011, 07:55 PM

here are some more...looking for $150 shipped

Vintage Windmills · 03-02-2011, 09:02 PM

Thanks Leroy, Does it feel rough where the chrome has been painted over on the bottom edge? I'm pretty sure they were all chrome originally. Any warps in the grille?

Leroy-B1 · 03-02-2011, 09:05 PM

I think this one has always been painted just the bumper usually hides that area...doesn't feel rough at all I think it would make a real nice driver if it was just polished up, hung in a garage for 25+ years before I got it...also have two sets of headlight rings in similar shape one has black paint in the middle and the other is all chrome

Vintage Windmills · 03-02-2011, 10:37 PM

Leroy,

How much for this with the chrome headlight bezels shipped?

jud

Leroy-B1 · 03-02-2011, 10:39 PM

150 provided I can find a box

Vintage Windmills · 03-02-2011, 10:39 PM

I will take at least the grille.

Vintage Windmills · 03-02-2011, 10:40 PM

Quote:

Originally Posted by Leroy-B1

150 provided I can find a box

Ok, sounds good, I'll take the grille and bezels.

Leroy-B1 · 03-02-2011, 10:46 PM

pm sent

Vintage Windmills · 03-03-2011, 01:11 AM

Payment sent. Thanks Leroy=B1!

je406 · 03-06-2011, 03:47 PM

do any of you guys have a set of 67 gmc hubcaps for sale?

cheyenne shortstep · 03-12-2011, 11:30 PM

I'm a long ways away but I have a cherry set of '67 doors and a decent set of '67 fenders.

Vintage Windmills · 03-13-2011, 12:37 AM

Quote:

Originally Posted by cheyenne shortstep

I'm a long ways away but I have a cherry set of '67 doors and a decent set of '67 fenders.

I've got a friend in Cloverdale, CA that will be driving my way in June, would you have a way to get there? What is your zip code?

Vintage Windmills · 03-13-2011, 12:57 AM

I also updated my 1st post for a driver door handle and the bright body trim molding pcs I need.

cheyenne shortstep · 03-13-2011, 05:08 PM

I'm in 92054, where the heck is Cloverdale. Depending on distance we may be able to work out delivery/meet halfway? I have a nice door handle as well.

cheyenne shortstep · 03-13-2011, 05:11 PM

Just found Cloverdale, we're a ways away. Maybe someone is headed from SoCal to NorCal and would haul?

mal68ibu · 03-13-2011, 05:33 PM

I have a whole 67 GMC custom for sale. Also a perfect small letter tailgate and hood I was saving for the truck. Previous owner put 68 trim on the hood and fenders. Truck is otherwise original paint small window. I put a diesel in it and spun a bearing so I'm bailing out on it, and selling off all the stuff I was saving for it. It won't be a cheap parts truck but it will be a quality one. I am closeish to your buddy in cloverdale.
Adam

Vintage Windmills · 03-13-2011, 09:13 PM

Quote:

Originally Posted by mal68ibu

I have a whole 67 GMC custom for sale. Also a perfect small letter tailgate and hood I was saving for the truck. Previous owner put 68 trim on the hood and fenders. Truck is otherwise original paint small window. I put a diesel in it and spun a bearing so I'm bailing out on it, and selling off all the stuff I was saving for it. It won't be a cheap parts truck but it will be a quality one. I am closeish to your buddy in cloverdale.
Adam

PM sent. I checked out your build thread for pics. Is your grille painted on the bottom area like the one I bought above? Mine was chrome there originally.

djgebert · 03-13-2011, 09:26 PM

Is this the emblem you are looking for. It is above the handle on a spare door I have. It has some primer overspray on it, but I scraped it right off with my fingernail. If its what you are looking for I will take it off and you can have it.

02-15-2011, 01:50 AM	#26
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: 67 GMC sheetmetal, emblem, tailgate Eric, thanks for the pics. What is the stud spacing on the back of that custom script emblem you have? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6 Last edited by Vintage Windmills; 02-15-2011 at 01:51 AM.

02-20-2011, 02:56 PM	#28
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB: 67 GMC sheetmetal, emblem, tailgate Jud, I should have time sometime this coming week, just let me know. Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-01-2011, 06:08 PM	#29
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: 67 GMC sheetmetal, emblem, tailgate Randy, Thanks again for looking at it for me. Sure was nice visiting with you on the phone too. I am still thinking on the truck, its too bad the condition isn't better on the body panels, even though there are a couple other useable parts. In the meantime, anything new out there for '67 GMC Parts that may be a better route for me to take?? Complete parts trucks considered too. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-02-2011, 12:03 AM	#30
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: WTB: 67 GMC sheetmetal, emblem, tailgate I've got a chrome 67 gmc grille will get pics if interested

03-02-2011, 12:25 AM	#31
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: 67 GMC sheetmetal, emblem, tailgate Yes, I'd like pics. Assuming its in good shape please post some. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-02-2011, 11:05 AM	#32
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: WTB: 67 GMC sheetmetal, emblem, tailgate will get some today and post tonight.... Here are some pics, has one small ding above the G Attached Images Last edited by Leroy-B1; 03-02-2011 at 07:55 PM.

03-02-2011, 07:55 PM	#33
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: WTB: 67 GMC sheetmetal, emblem, tailgate here are some more...looking for $150 shipped Attached Images Last edited by Leroy-B1; 03-02-2011 at 07:57 PM.

03-02-2011, 09:02 PM	#34
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: 67 GMC sheetmetal, emblem, tailgate Thanks Leroy, Does it feel rough where the chrome has been painted over on the bottom edge? I'm pretty sure they were all chrome originally. Any warps in the grille? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-02-2011, 09:05 PM	#35
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: WTB: 67 GMC sheetmetal, emblem, tailgate I think this one has always been painted just the bumper usually hides that area...doesn't feel rough at all I think it would make a real nice driver if it was just polished up, hung in a garage for 25+ years before I got it...also have two sets of headlight rings in similar shape one has black paint in the middle and the other is all chrome Last edited by Leroy-B1; 03-02-2011 at 09:06 PM.

03-02-2011, 10:37 PM	#36
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: 67 GMC sheetmetal, emblem, tailgate Leroy, How much for this with the chrome headlight bezels shipped? jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-02-2011, 10:39 PM	#37
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: WTB: 67 GMC sheetmetal, emblem, tailgate 150 provided I can find a box

03-02-2011, 10:46 PM	#40
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: WTB: 67 GMC sheetmetal, emblem, tailgate pm sent

03-03-2011, 01:11 AM	#41
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: 67 GMC sheetmetal, emblem, tailgate Payment sent. Thanks Leroy=B1! __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-06-2011, 03:47 PM	#42
je406 Registered User Join Date: Mar 2011 Location: Tallahassee, fl. Posts: 21	Re: WTB: 67 GMC sheetmetal, emblem, tailgate do any of you guys have a set of 67 gmc hubcaps for sale?

03-12-2011, 11:30 PM	#43
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: WTB: 67 GMC sheetmetal, emblem, tailgate I'm a long ways away but I have a cherry set of '67 doors and a decent set of '67 fenders.



Register or Log In To remove these advertisements.

03-13-2011, 12:57 AM	#45
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: 67 GMC sheetmetal, emblem, tailgate I also updated my 1st post for a driver door handle and the bright body trim molding pcs I need. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-13-2011, 05:08 PM	#46
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: WTB: 67 GMC sheetmetal, emblem, tailgate I'm in 92054, where the heck is Cloverdale. Depending on distance we may be able to work out delivery/meet halfway? I have a nice door handle as well.

03-13-2011, 05:11 PM	#47
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: WTB: 67 GMC sheetmetal, emblem, tailgate Just found Cloverdale, we're a ways away. Maybe someone is headed from SoCal to NorCal and would haul?

03-13-2011, 05:33 PM	#48
mal68ibu Parts Hunter Join Date: Oct 2006 Location: Sacramento Posts: 247	Re: WTB: 67 GMC sheetmetal, emblem, tailgate I have a whole 67 GMC custom for sale. Also a perfect small letter tailgate and hood I was saving for the truck. Previous owner put 68 trim on the hood and fenders. Truck is otherwise original paint small window. I put a diesel in it and spun a bearing so I'm bailing out on it, and selling off all the stuff I was saving for it. It won't be a cheap parts truck but it will be a quality one. I am closeish to your buddy in cloverdale. Adam __________________ 1968 Chevelle 300 DLX (350 4 speed) 1984 GMC 2500 6.2, 700r4 work truck 1967 GMC Custom (was 6.5 Turbo Diesel powered) My ebay Store: http://stores.ebay.com/The-Musclecar...3aFQ3aSTQQtZkm My website:http://themusclecarshop.net/ 1967 GMC 6.5 TD conversion build:http://67-72chevytrucks.com/vboard/s...d.php?t=290922

03-13-2011, 09:26 PM	#50
djgebert Registered User Join Date: Jan 2008 Location: Fort Wayne, Indiana Posts: 197	Re: WTB: 67 GMC sheetmetal, emblem, tailgate Is this the emblem you are looking for. It is above the handle on a spare door I have. It has some primer overspray on it, but I scraped it right off with my fingernail. If its what you are looking for I will take it off and you can have it. Attached Images

Register or Log In To remove these advertisements.