You guys with static dropped duallies(esp 6/8) inside. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RotaryRocketeer · 09-06-2017, 12:38 PM

Quote:

Originally Posted by SCOTI

As far as I could find, they only make 3" spindles for 1-tons.

My bad. This is right. I was thinking of a 3" SPINDLE with a 2" drop spring. That'd get you the 5" of front drop you're wanting.

PowerdbyChevy79 · 09-07-2017, 12:31 PM

Quote:

Originally Posted by SCOTI

As far as I could find, they only make 3" spindles for 1-tons.

Why are you hesitant about cutting the current coils? 1-coil off get's you where you want to be & is a common method when lowering. As far as drop coils go, the springs are the same OD as the 1/2 ton trucks but have a higher rate. The problem w/most aftermarket drop springs is they don't provide the spring rate info. They just market them as 1, 2, or 3" 'drop'.

every set of springs that I cut always end up sagging on me..I dont like that.. its cool but then you start having a lean..and drives me crazy.. 1 cut coil max is what I always do..

PowerdbyChevy79 · 09-07-2017, 12:36 PM

https://westernchassisinc.com/Chevy-...-Lowering-Kit/
I found this.. but I'm not sure what drop it is exactly..I.m assuming its a 4/6

RotaryRocketeer · 09-07-2017, 12:47 PM

http://switchsuspension.com/chevrole...luxe-drop-kit/

These guys are supposed to be pretty knowledgeable and provide great product support. Heard about them on DuallyScene. Descriptions seem to be more in-depth as well. This is the kit I plan to go with. 5/7.

PowerdbyChevy79 · 09-08-2017, 11:02 AM

Quote:

Originally Posted by RotaryRocketeer

http://switchsuspension.com/chevrole...luxe-drop-kit/

These guys are supposed to be pretty knowledgeable and provide great product support. Heard about them on DuallyScene. Descriptions seem to be more in-depth as well. This is the kit I plan to go with. 5/7.

I will check them out.. thank you brother..

cloud 9 · 10-07-2018, 05:19 AM

I'm confused at Western Chassis 6/8 drop kit. what are you getting? Spindles coils for the front I understand but what about the rear just a flip kit? No shocks? I fail to see how this cost almost a grand! Only thing that is needed is the front with maybe $80 in flipping and c notching the frame.

09-07-2017, 12:36 PM	#28
PowerdbyChevy79 Registered User Join Date: Apr 2013 Location: Houston,Tx Posts: 790	Re: You guys with static dropped duallies(esp 6/8) inside. https://westernchassisinc.com/Chevy-...-Lowering-Kit/ I found this.. but I'm not sure what drop it is exactly..I.m assuming its a 4/6 __________________ 1966 C10 "Mary" 1972 C10 Cheyenne "Betty" https://67-72chevytrucks.com/vboard/...d.php?t=847364 1979 C10 Silverado "The BIG TEN" https://67-72chevytrucks.com/vboard/...d.php?t=841339 C10 Club Texas -HMIC

09-07-2017, 12:47 PM	#29
RotaryRocketeer Registered User Join Date: Jul 2017 Location: OKC, OK Posts: 247	Re: You guys with static dropped duallies(esp 6/8) inside. http://switchsuspension.com/chevrole...luxe-drop-kit/ These guys are supposed to be pretty knowledgeable and provide great product support. Heard about them on DuallyScene. Descriptions seem to be more in-depth as well. This is the kit I plan to go with. 5/7.

10-07-2018, 05:19 AM	#31
cloud 9 Registered User Join Date: Oct 2014 Location: Los Angeles Posts: 3	Re: You guys with static dropped duallies(esp 6/8) inside. I'm confused at Western Chassis 6/8 drop kit. what are you getting? Spindles coils for the front I understand but what about the rear just a flip kit? No shocks? I fail to see how this cost almost a grand! Only thing that is needed is the front with maybe $80 in flipping and c notching the frame.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.