1967 Short Step

[Strodder]

Gage, it sounds like you want to go fast.

[jgh64pkup]

Maybe just a little
Posted via Mobile Device

[jgh64pkup]

Well I got the 408 in, it needs heads, so I'm trying to sell my dirtbike so I can buy a set of dart 230cc pro 1s
Posted via Mobile Device

[ruffrida2005]

You gonna make this another drag truck?

And lets see some pic.

[jgh64pkup]

More of just a quick street truck
Posted via Mobile Device

[jgh64pkup]

Posted via Mobile Device

[jgh64pkup]

Well still no heads, I did get a new truck though, it's an 05 regency rst with 97000 miles and a 5.3


And I started on the rear suspension with the coil overs and adjustable panhard bar
Here's some pics of just the coil overs, I havnt made the panhard bar yet


Posted via Mobile Device

[ruffrida2005]

That welding lead looks like it's seen better days. What welding rod are you using? The panhard is going to stick far off the axle with those coils there. Have you thought about a rear mount gas tank for better traction?

[jgh64pkup]

6011, I'm gonna keep the in cab tank, or a fuel cell on top of the bed




Posted via Mobile Device

[jgh64pkup]

Well I havnt updated in a long time, I ended up burning up the clutches so the tranny came out, I just threw a temp trans in there. Then I picked up a 1994 v6 camaro and I put the 408 in it, it took a lot of fabbing but made it work. It was a clean well built car but I didn't like it so I traded it for a 1972 k10. So I'm driving the 72 and the 67 is sitting there on hold
I think I might pull the 383 out of the 72 and put it in the 67. I'm not sure yet.
Posted via Mobile Device

[jgh64pkup]

On the trailer ready to trade

What I traded for


First time in the mud


Posted via Mobile Device

[jgh64pkup]

well a little update, i pulled the engine out of the 4x4 and traded the rolling chassis for a running and driving 1996 gt mustang, pi swapped 4.6 with longtubes, offroad h-pipe, flowmaster super 44s, cold air, tuned, egr delete, tubular rear control arms and its lowered, and i have the engine sold from the 4x4, its going in a mustang fox body.
ill try to get some pics up soon

[mud.man.rj]

Stay yellow, it isn't to common just add in some white or black, I think the white would make the yellow pop. More hp is always better, as cubic inchs are. Is that Tim Allen.

[mud.man.rj]

OH AND i MISS THE 4X4 already, was sweet. Trucks over cars anyday.

[jgh64pkup]

i might be looking for a 6.0 t56 for old yeller soon might need to sell the mustang

[jgh64pkup]

well i found an lt1/t56 for 1000 bucks, b&m ripper shifter xtd stage 3 clutch and hooker super comp headers, complete engine harness and pedals, it also has a VATS bypass module. so once again i have changed my mind, out with the ford and in with the chevy,
i just ordered a 16 gallon fuel cell and high pressure pump, and will soon be ordering a cc306 cam, mini spool, 410 gears, and a megasquirt 2 setup

[mud.man.rj]

Now those parts are starting to really sound like something good, I have to get everyone elses stuff done so I can get to mine soon, it will come.

[jgh64pkup]

Engine is almost in just need to
Finish up the firewall not too far from it driving again
Posted via Mobile Device

[jgh64pkup]

Well I drove and after 4 days of driving it rained so the opti went out(probably a month ago) replaced that and on the first drive with the new opti my clutch master cylinder went out. I just picked up a cc306 cam,1.6 roller rockers, .600 lift springs, and gaskets, got it all in. Now I just need to finish everything up and get it tuned
Posted via Mobile Device

[jgh64pkup]

Well it's been a while and quite a bit has changed. I pulled the lt1/t56 out and put it in a fox body, sold the fox and bought a r6. I finally came across an engine and trans for old yeller. Th350/ zz4 has a comp thumpr hydraulic roller, l98 aluminum heads, and a 71 lt1 intake. Got a steal on both, 600 for the engine and 100 for the trans. I also have a big block on the stand getting ready for a build, peanut port headed 454, paid 50 bucks intake to pan. All from good sources, I actually owned the zz4 before. Should be getting started pretty quick and ill try to get some pics up
Posted via Mobile Device

[jgh64pkup]

Posted via Mobile Device

[67cheby]

looks like FUN ! I built a yellow 71 stepside along time ago, i like the yellow also !

[jgh64pkup]

I'm already missing the lt1 though. That six speed was way too fun
Posted via Mobile Device

[jgh64pkup]

http://i886.photobucket.com/albums/a...4/50960273.mp4
Old lt1/t56 setup. Have another video with the cam in the truck and one of it running in the fox body
Posted via Mobile Device

[Beetle]

Originally Posted by 67chevy1series

i think this color blue would be awsome

Love those caps! Those are the caps we are going with on our truck.