NOS Black Shoulder Belt Set on Ebay...Not mine. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972K20 · 03-28-2011, 01:41 AM

Never knew Corvette seat belt boots would work.

VA72C10 · 03-28-2011, 01:53 AM

Pretty crazy. The cynic in me makes me wonder if someone put together a set like I will for my super and then sold them as NOS with some boxes they had left over from their real set....

....anyone have any leftover boxes

I am seriously just kidding. I'd never pass them off as NOS but I am seriously considering making two sets and using one for my super and seeing what I can get on ebay with the second.

70LonghornCST · 03-28-2011, 02:16 AM

Quote:

Originally Posted by VA72C10

Pretty crazy. The cynic in me makes me wonder if someone put together a set like I will for my super and then sold them as NOS with some boxes they had left over from their real set....

....anyone have any leftover boxes

I am seriously just kidding. I'd never pass them off as NOS but I am seriously considering making two sets and using one for my super and seeing what I can get on ebay with the second.

The only thing that makes me believe that the seller didn't make the belts is because the pillar mounting end is correct. Unless someone made one by cutting down the female mounting end...but I seriously doubt it. I think they are GM made...but I suppose it's possible the boots were swapped before posting them. Again, I doubt it. I really think GM used the corvette style because they were what was available.

If you make two sets, are you going to use the car mounting ends or modify the truck mounting end?

70LonghornCST · 03-28-2011, 02:17 AM

Quote:

Originally Posted by 1972K20

Never knew Corvette seat belt boots would work.

They will, but according to Trevor, keep your window up if the belt is in the boot. They don't hold as well as the original truck boots with the retaining dimple.

VA72C10 · 03-28-2011, 02:18 AM

Not sure. Going to call the guy who has the correct GM webbing and who re-did my other belts for me. He does more than just these trucks so he might have the correct pieces from the car or might even have the correct truck ones...

**71blksuper4x4** · 03-28-2011, 11:38 AM

Here is a link:
http://www.corvetteamerica.com/cf/di...%3A%20shoulder

42344- Black
49941- Blue
49942- Medium Saddle
49943- Red

Like everyone has said, you can make them. They just won't be 100% authentic. Not that the common person would know. I have ran a similar type setup, and I just don't like the way they don't hold the belts up out of the way like the originals I have. Trevor

mal68ibu · 03-29-2011, 12:24 PM

Quote:

Originally Posted by VA72C10

Pretty crazy. The cynic in me makes me wonder if someone put together a set like I will for my super and then sold them as NOS with some boxes they had left over from their real set....

....anyone have any leftover boxes

I am seriously just kidding. I'd never pass them off as NOS but I am seriously considering making two sets and using one for my super and seeing what I can get on ebay with the second.

I may get to test the waters on that pretty soon. I've got a set in the shop I had made with all the correct parts. I'm just waiting for the female part to get fixed. I didn't like the way they were done the first time around. Retractors and shoulder belts are all done. No I won't be listing them as NOS.

mal68ibu · 03-29-2011, 12:26 PM

Quote:

Originally Posted by 71blksuper4x4

Here is a link:
http://www.corvetteamerica.com/cf/di...%3A%20shoulder

42344- Black
49941- Blue
49942- Medium Saddle
49943- Red

Like everyone has said, you can make them. They just won't be 100% authentic. Not that the common person would know. I have ran a similar type setup, and I just don't like the way they don't hold the belts up out of the way like the originals I have. Trevor

Don't tell anyone but 68-69 Mustang should belt boots are a dead ringer, and have the dimple.

**71blksuper4x4** · 03-29-2011, 01:06 PM

Quote:

Originally Posted by mal68ibu

Don't tell anyone but 68-69 Mustang should belt boots are a dead ringer, and have the dimple.

They have a dimple, but don't look close to original. I'll snap some pics of my original boots. Trevor

**leddzepp** · 03-29-2011, 02:00 PM

Quote:

Originally Posted by mal68ibu

Don't tell anyone but 68-69 Mustang should belt boots are a dead ringer, and have the dimple.

I have had several sets from a 68-69 Mustang and Cougar. They are close, but still easy to differentiate.

**DANTIP** · 03-29-2011, 02:01 PM

Here's my shoulder belts with the dimpled receptacles.

**leddzepp** · 03-29-2011, 02:06 PM

Mine are identical to Dan's pictured above.

VA72C10 · 03-29-2011, 02:48 PM

Quote:

Originally Posted by mal68ibu

I may get to test the waters on that pretty soon. I've got a set in the shop I had made with all the correct parts. I'm just waiting for the female part to get fixed. I didn't like the way they were done the first time around. Retractors and shoulder belts are all done. No I won't be listing them as NOS.

keep us in the loop and let us know when you list them so we can watch them

mal68ibu · 04-02-2011, 07:37 PM

I wasn't intending to suggest the mustang units were identicle, just close and readily available. I have had a couple sets of originals. I've also noticed that the lower boots in certain years of 80's blazers look similar, w/o the dimple. Was wondering how much heat it would take to make a dimple in them.

**leddzepp** · 04-02-2011, 07:41 PM

The dimple is what is seen on the outside. Inside the cover it is a molded "hook" so to speak that retains the belt buckle. Several people have tried to replicate the dimple, but it only leads to destroying the boot.

jay_shy · 04-02-2011, 08:05 PM

check this thread for the boot differences...

http://67-72chevytrucks.com/vboard/s...highlight=boot

03-28-2011, 01:41 AM	#26
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: NOS Black Shoulder Belt Set on Ebay...Not mine. Never knew Corvette seat belt boots would work.

03-28-2011, 01:53 AM	#27
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: NOS Black Shoulder Belt Set on Ebay...Not mine. Pretty crazy. The cynic in me makes me wonder if someone put together a set like I will for my super and then sold them as NOS with some boxes they had left over from their real set.... ....anyone have any leftover boxes I am seriously just kidding. I'd never pass them off as NOS but I am seriously considering making two sets and using one for my super and seeing what I can get on ebay with the second. __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-28-2011, 02:18 AM	#30
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: NOS Black Shoulder Belt Set on Ebay...Not mine. Not sure. Going to call the guy who has the correct GM webbing and who re-did my other belts for me. He does more than just these trucks so he might have the correct pieces from the car or might even have the correct truck ones... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-28-2011, 11:38 AM	#31
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: NOS Black Shoulder Belt Set on Ebay...Not mine. Here is a link: http://www.corvetteamerica.com/cf/di...%3A%20shoulder 42344- Black 49941- Blue 49942- Medium Saddle 49943- Red Like everyone has said, you can make them. They just won't be 100% authentic. Not that the common person would know. I have ran a similar type setup, and I just don't like the way they don't hold the belts up out of the way like the originals I have. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever Last edited by 71blksuper4x4; 03-28-2011 at 11:43 AM.

03-29-2011, 02:01 PM	#36
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,888	Re: NOS Black Shoulder Belt Set on Ebay...Not mine. Here's my shoulder belts with the dimpled receptacles. Attached Images

03-29-2011, 02:06 PM	#37
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: NOS Black Shoulder Belt Set on Ebay...Not mine. Mine are identical to Dan's pictured above. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

04-02-2011, 07:37 PM	#39
mal68ibu Parts Hunter Join Date: Oct 2006 Location: Sacramento Posts: 247	Re: NOS Black Shoulder Belt Set on Ebay...Not mine. I wasn't intending to suggest the mustang units were identicle, just close and readily available. I have had a couple sets of originals. I've also noticed that the lower boots in certain years of 80's blazers look similar, w/o the dimple. Was wondering how much heat it would take to make a dimple in them. __________________ 1968 Chevelle 300 DLX (350 4 speed) 1984 GMC 2500 6.2, 700r4 work truck 1967 GMC Custom (was 6.5 Turbo Diesel powered) My ebay Store: http://stores.ebay.com/The-Musclecar...3aFQ3aSTQQtZkm My website:http://themusclecarshop.net/ 1967 GMC 6.5 TD conversion build:http://67-72chevytrucks.com/vboard/s...d.php?t=290922

04-02-2011, 07:41 PM	#40
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: NOS Black Shoulder Belt Set on Ebay...Not mine. The dimple is what is seen on the outside. Inside the cover it is a molded "hook" so to speak that retains the belt buckle. Several people have tried to replicate the dimple, but it only leads to destroying the boot. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

04-02-2011, 08:05 PM	#41
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: NOS Black Shoulder Belt Set on Ebay...Not mine. check this thread for the boot differences... http://67-72chevytrucks.com/vboard/s...highlight=boot



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.