Wheel wells for 67-72 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NuttinSpecial · 08-27-2011, 07:54 PM

It would be great if they made a matching notch cover. To match the shape of the rear tubs and even had matching lines. Thatd be sliiiick and id have to have some
Posted via Mobile Device

fastbagged68 · 08-27-2011, 08:30 PM

He is making rear wheelwells too. Not a cover at this time that I am aware of. I'm sure Curt will chime in soon. I have seen these wheelwells in person, who ever gets a set will not be disappointed.
Posted via Mobile Device

NuttinSpecial · 08-27-2011, 09:04 PM

Definately interested in the rears, what size tire you can layout on up front will determine if im interested in fronts. I plan on runnin a 255/30/22 up front which are 28.02 inches tall and 67cheby says you can layout on a 28" tire with his which is almost perfect

If worse comes to worse i can put the wheels for the front on the back and do a burnout then theyll fit up front for sure

lol
Posted via Mobile Device

Rochlow · 08-29-2011, 06:28 PM

Can you use the factory blower motor and heater with this?
Posted via Mobile Device

Hill's Rod & Custom · 01-18-2012, 07:09 PM

Ok guys the wheel wells are finally done!!! Sorry for such a delay but I put these on the backburner until I finished the Blazer they were built for. Before I offered them for sale I wanted to make sure I have everything finished for them. Boxes are ordered and we should be ready to take orders and ship February.
If you want to see these in person I will be showing the blazer @ the Grand National Roadster Show in Pomona Jan. 27-29. We are suppose to be in building 6. I cannot post pictures of the blazer until after the show.

Hill's Rod & Custom · 01-18-2012, 07:15 PM

Sorry the upside down picture...

YBNORML · 01-18-2012, 07:33 PM

What is the max diameter wheel/tire combo that these will work with. I am running a dropmember with 22x9.5 with 5.5"bs and a 235/35/22 tire.

Wheel wells look wicked !
Posted via Mobile Device

gringoloco · 01-18-2012, 08:05 PM

Purdy!

Hill's Rod & Custom · 01-18-2012, 08:34 PM

The fronts will lay out on a 28" tall tire
Posted via Mobile Device

**robnolimit** · 01-18-2012, 09:04 PM

Can you use stock hood hinges with these? Looks great, see you in Pomona. I'd like to put a set in the JT

**lolife99** · 01-18-2012, 09:25 PM

How much for the front set including shipping to 65251?

YBNORML · 01-18-2012, 09:45 PM

Quote:

Originally Posted by Hill's Rod & Custom

The fronts will lay out on a 28" tall tire
Posted via Mobile Device

Ok, thanks for the info.
Posted via Mobile Device

fastbagged68 · 01-20-2012, 12:25 AM

I have seen these wheel wells, these pictures don't do them justice. Hill's Rod & Custom have built a nice piece. The wheel wells look like stock ones. Same shape and lay out on a 28" tire. They cover all your suspension and keep your motor compartment clean. The rears are also sweet. They are wider & taller then stock. If you are in Pomona at the roadster show make sure you check out the blazer Curt built.
Posted via Mobile Device

Hill's Rod & Custom · 01-21-2012, 02:41 AM

Quote:

Originally Posted by lolife99

How much for the front set including shipping to 65251?

Just got tester boxes in and will figure out weight and size for shipping and let you know early next week.
Posted via Mobile Device

**lolife99** · 01-21-2012, 02:55 AM

Quote:

Originally Posted by Hill's Rod & Custom

Just got tester boxes in and will figure out weight and size for shipping and let you know early next week.
Posted via Mobile Device

Thanks.
UPS has been destroying parts like crazy lately.
Add room for plenty of packing! Ha.

fastbagged68 · 01-27-2012, 02:28 AM

Anybody that is in the L.A. area wants to see these wheel wells in person come by the grand national roadster show in Pomona this weekend. The blazer is in building 6.
Posted via Mobile Device

**lolife99** · 01-28-2012, 03:15 PM

All I can say is BAD A$$!
I assume that is ride height with the coil over front Dropmember?

m6z · 01-28-2012, 03:50 PM

nice.

nastyc10 · 01-28-2012, 04:04 PM

awesome blazer!

72BlckButy · 01-29-2012, 05:15 PM

Love that blazer... but need more pics of those inners.

obsesive23 · 02-14-2012, 03:12 PM

Anybody have more pics of that blazer? I looked on hills website and didn't see anything on the blazer or the tubs. Very interested in a full set. How much with shipping to 98021?
Posted via Mobile Device
Posted via Mobile Device

Hill's Rod & Custom · 02-14-2012, 05:50 PM

Sorry guys for not getting back on here since the Grand National Roadster Show. I have been really busy with the other projects in the shop. The Show was a pretty good success. We got 1st place in our class. I got alot of interest in the Blazer & the wheelwells. I am about complete and ready to ship these wheel wells. I am just waiting on a few phone calls with details about shipping.
If you are in Northern California and want to do a local pickup I do have a few sets in my shop that I could possibly sell. Let me know if any local guys would be interested. PM me.
The Blazer is going to be @ the Sacramento Show this weekend. http://www.rodshows.com/sa/index.html If you are there stop and says whats up!
I will try to post a few more pics tonight or tomorrow, these should hold you over til then!

Thanks,
Curt Hill

Oh and that is ride height on coil-overs.

**lolife99** · 02-14-2012, 05:55 PM

Still interested in a pair of the front inner fenders shipped.

kvn1011 · 02-14-2012, 08:44 PM

Nice, how tall of a tire will work for the rear laid out? & will it work for trucks as well?
Posted via Mobile Device

texastrendz · 02-14-2012, 09:54 PM

I would be interested in a set of front inners. I would like to know current pricing and shipping cost to 77092. Thanks Daniel.

08-27-2011, 07:54 PM	#26
NuttinSpecial Registered User Join Date: Apr 2011 Location: Houston Texas Posts: 207	Re: Wheel wells for 67-72 It would be great if they made a matching notch cover. To match the shape of the rear tubs and even had matching lines. Thatd be sliiiick and id have to have some Posted via Mobile Device

08-27-2011, 08:30 PM	#27
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Re: Wheel wells for 67-72 He is making rear wheelwells too. Not a cover at this time that I am aware of. I'm sure Curt will chime in soon. I have seen these wheelwells in person, who ever gets a set will not be disappointed. Posted via Mobile Device

08-27-2011, 09:04 PM	#28
NuttinSpecial Registered User Join Date: Apr 2011 Location: Houston Texas Posts: 207	Re: Wheel wells for 67-72 Definately interested in the rears, what size tire you can layout on up front will determine if im interested in fronts. I plan on runnin a 255/30/22 up front which are 28.02 inches tall and 67cheby says you can layout on a 28" tire with his which is almost perfect If worse comes to worse i can put the wheels for the front on the back and do a burnout then theyll fit up front for sure lol Posted via Mobile Device

08-29-2011, 06:28 PM	#29
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Wheel wells for 67-72 Can you use the factory blower motor and heater with this? Posted via Mobile Device

01-18-2012, 07:09 PM	#30
Hill's Rod & Custom Registered User Join Date: May 2011 Location: California Posts: 55	Re: Wheel wells for 67-72 Ok guys the wheel wells are finally done!!! Sorry for such a delay but I put these on the backburner until I finished the Blazer they were built for. Before I offered them for sale I wanted to make sure I have everything finished for them. Boxes are ordered and we should be ready to take orders and ship February. If you want to see these in person I will be showing the blazer @ the Grand National Roadster Show in Pomona Jan. 27-29. We are suppose to be in building 6. I cannot post pictures of the blazer until after the show. Attached Images __________________ www.hillsrodandcustom.com Check out the wheel wells built to let you drive low and look like the factory.... http://67-72chevytrucks.com/vboard/s...d.php?t=465046 You can purchase them here... http://www.hillsrodandcustom.com/?page_id=19 Vendor for: AccuAir California Performance Transmission - Art Carr Porterbuilt

01-18-2012, 07:15 PM	#31
Hill's Rod & Custom Registered User Join Date: May 2011 Location: California Posts: 55	Re: Wheel wells for 67-72 Sorry the upside down picture... Attached Images __________________ www.hillsrodandcustom.com Check out the wheel wells built to let you drive low and look like the factory.... http://67-72chevytrucks.com/vboard/s...d.php?t=465046 You can purchase them here... http://www.hillsrodandcustom.com/?page_id=19 Vendor for: AccuAir California Performance Transmission - Art Carr Porterbuilt

01-18-2012, 07:33 PM	#32
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: Wheel wells for 67-72 What is the max diameter wheel/tire combo that these will work with. I am running a dropmember with 22x9.5 with 5.5"bs and a 235/35/22 tire. Wheel wells look wicked ! Posted via Mobile Device __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

01-18-2012, 08:05 PM	#33
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Wheel wells for 67-72 Purdy! __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-18-2012, 08:34 PM	#34
Hill's Rod & Custom Registered User Join Date: May 2011 Location: California Posts: 55	Re: Wheel wells for 67-72 The fronts will lay out on a 28" tall tire Posted via Mobile Device __________________ www.hillsrodandcustom.com Check out the wheel wells built to let you drive low and look like the factory.... http://67-72chevytrucks.com/vboard/s...d.php?t=465046 You can purchase them here... http://www.hillsrodandcustom.com/?page_id=19 Vendor for: AccuAir California Performance Transmission - Art Carr Porterbuilt

01-18-2012, 09:04 PM	#35
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: Wheel wells for 67-72 Can you use stock hood hinges with these? Looks great, see you in Pomona. I'd like to put a set in the JT __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

01-18-2012, 09:25 PM	#36
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Wheel wells for 67-72 How much for the front set including shipping to 65251? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-20-2012, 12:25 AM	#38
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Re: Wheel wells for 67-72 I have seen these wheel wells, these pictures don't do them justice. Hill's Rod & Custom have built a nice piece. The wheel wells look like stock ones. Same shape and lay out on a 28" tire. They cover all your suspension and keep your motor compartment clean. The rears are also sweet. They are wider & taller then stock. If you are in Pomona at the roadster show make sure you check out the blazer Curt built. Posted via Mobile Device

01-27-2012, 02:28 AM	#41
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Re: Wheel wells for 67-72 Anybody that is in the L.A. area wants to see these wheel wells in person come by the grand national roadster show in Pomona this weekend. The blazer is in building 6. Posted via Mobile Device

01-28-2012, 03:15 PM	#42
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Wheel wells for 67-72 All I can say is BAD A$$! I assume that is ride height with the coil over front Dropmember? Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-28-2012, 03:50 PM	#43
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Wheel wells for 67-72 nice. __________________ Doug Looking for a 67-72 short bed driver.....



Register or Log In To remove these advertisements.

01-28-2012, 04:04 PM	#44
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Wheel wells for 67-72 awesome blazer!

01-29-2012, 05:15 PM	#45
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Wheel wells for 67-72 Love that blazer... but need more pics of those inners. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-14-2012, 03:12 PM	#46
obsesive23 Who me? Join Date: Jun 2004 Location: Bothell WA Posts: 640	Re: Wheel wells for 67-72 Anybody have more pics of that blazer? I looked on hills website and didn't see anything on the blazer or the tubs. Very interested in a full set. How much with shipping to 98021? Posted via Mobile Device Posted via Mobile Device __________________ Living the dream 72 2WD Blazer, under going porter built surgery 67 GT Mustang fastback 67 Mustang coupe C/S clone 64 Falcon sprint hardtop

02-14-2012, 05:50 PM	#47
Hill's Rod & Custom Registered User Join Date: May 2011 Location: California Posts: 55	Re: Wheel wells for 67-72 Sorry guys for not getting back on here since the Grand National Roadster Show. I have been really busy with the other projects in the shop. The Show was a pretty good success. We got 1st place in our class. I got alot of interest in the Blazer & the wheelwells. I am about complete and ready to ship these wheel wells. I am just waiting on a few phone calls with details about shipping. If you are in Northern California and want to do a local pickup I do have a few sets in my shop that I could possibly sell. Let me know if any local guys would be interested. PM me. The Blazer is going to be @ the Sacramento Show this weekend. http://www.rodshows.com/sa/index.html If you are there stop and says whats up! I will try to post a few more pics tonight or tomorrow, these should hold you over til then! Thanks, Curt Hill Oh and that is ride height on coil-overs. Attached Images __________________ www.hillsrodandcustom.com Check out the wheel wells built to let you drive low and look like the factory.... http://67-72chevytrucks.com/vboard/s...d.php?t=465046 You can purchase them here... http://www.hillsrodandcustom.com/?page_id=19 Vendor for: AccuAir California Performance Transmission - Art Carr Porterbuilt

02-14-2012, 05:55 PM	#48
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Wheel wells for 67-72 Still interested in a pair of the front inner fenders shipped. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 02-14-2012 at 06:15 PM.

02-14-2012, 08:44 PM	#49
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: Wheel wells for 67-72 Nice, how tall of a tire will work for the rear laid out? & will it work for trucks as well? Posted via Mobile Device __________________ My Build Thead (Project Slow Motion)

02-14-2012, 09:54 PM	#50
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: Wheel wells for 67-72 I would be interested in a set of front inners. I would like to know current pricing and shipping cost to 77092. Thanks Daniel.

Register or Log In To remove these advertisements.