71 jimmy build - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gm71jimmy · 06-30-2011, 12:42 PM

Floor,rockers,lower bed patch all welded in place

gm71jimmy · 06-30-2011, 12:44 PM

Some grinding and more work.

gm71jimmy · 06-30-2011, 12:49 PM

more...

gm71jimmy · 06-30-2011, 12:57 PM

With the front floor solid it was time to rework the rust rear floor. New sheet metal.

gm71jimmy · 06-30-2011, 01:03 PM

Found a chevy tail gate in ok shape. Needs a little work but is fixable. It fits the body line nicely. Will be using the GMC tail gate band so it will cover the chevy.

1949gmc · 06-30-2011, 04:25 PM

That sure is a lot of welding and grinding. Your back must be killing you. How many days did it take to get the front and back finished up?

Nice work!

gm71jimmy · 07-01-2011, 02:02 AM

It is defiantly back breaking work to say the least as everyone knows. Been building classics for 14 years now and I am young at 31 but every week it seems to get more difficult to do this work. To do all the metal work it took about 7 weeks total over a 6 month period. With building customs for friends and selling classic car parts as a full time job it is hard to find the time to work on my own projects and i have way to many. Although I had 26 cars a few years ago and now down to 7 cars/trucks.

Thanks for all the comments

gm71jimmy · 07-06-2011, 01:12 PM

...

gm71jimmy · 07-06-2011, 01:18 PM

Got the front fenders and grille all fitted. After buying 5 top grille bars i still could not find a nice rust free or straight one so i ended up having the fix the best one of the 5. It took a lot of bending and pulling but it is now perfect.

gm71jimmy · 07-06-2011, 01:23 PM

All the sheet metal work is finaly done and the tub is off the frame and ready for final blasting.

gm71jimmy · 07-06-2011, 01:31 PM

All the front end chrome is ready and will be sent out to the chrome shop next week. This is going to put a dent in the pocket book.

chevy2racr · 07-06-2011, 11:13 PM

lookin good man

gm71jimmy · 07-07-2011, 02:17 PM

Quote:

Originally Posted by chevy2racr

lookin good man

Thank you

gm71jimmy · 07-07-2011, 02:26 PM

Got the tub on the rotisserie today. Would like to start blasting but it is just too hot today to suit up and start that. Maybe by the weekend.

gm71jimmy · 07-07-2011, 02:31 PM

I was so excited to get to this point that it looks like i forgot to put the cowl braces on. Just noticed it from the picture. opps!!

Hope i didnt twist anything.

1956cameo · 07-07-2011, 07:06 PM

That build is really coming along nicely!

**Tom Vogel** · 07-07-2011, 08:43 PM

Who is your chromer? I've used a few... Some great some completely not. Price sure varies, huh?
Posted via Mobile Device

Luba · 07-08-2011, 08:56 AM

What media do you use for blasting? I was thinking of having my tub soda blasted so metal won't warp.

gm71jimmy · 07-12-2011, 01:18 PM

Quote:

Originally Posted by Tom Vogel

Who is your chromer? I've used a few... Some great some completely not. Price sure varies, huh?
Posted via Mobile Device

I Use big D's chrome plating in LA area. The guy use to manage the bumper shop but then opened his own shop. I have never had any problems. Been having him do my plating for the last 8 years. Does great work every time.

gm71jimmy · 07-12-2011, 01:24 PM

Quote:

Originally Posted by Luba

What media do you use for blasting? I was thinking of having my tub soda blasted so metal won't warp.

I use different media for different areas. sand,glass, and plastic. I dont like the blasting but after 2 shops completey warped a few car bodys.

I didnt trust any more shops so i bought a blaster and started doing it myself. Have never warped one yet!

gm71jimmy · 07-12-2011, 01:28 PM

Got the complete tub blasted over the weekend. Took several days to do because of the weather but it is done and ready for some epoxy.

gm71jimmy · 07-12-2011, 01:29 PM

...

wholio · 07-12-2011, 05:32 PM

subscribe

**Thealien** · 07-12-2011, 05:45 PM

What will the chroming cost? I would also like to rechrome my originals.

**Thealien** · 07-12-2011, 05:45 PM

Nice work BTW

06-30-2011, 12:42 PM	#26
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build Floor,rockers,lower bed patch all welded in place Attached Images __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

06-30-2011, 12:44 PM	#27
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build Some grinding and more work. Attached Images __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

06-30-2011, 12:49 PM	#28
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build more... Attached Images __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

06-30-2011, 12:57 PM	#29
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build With the front floor solid it was time to rework the rust rear floor. New sheet metal. Attached Images __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

06-30-2011, 01:03 PM	#30
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build Found a chevy tail gate in ok shape. Needs a little work but is fixable. It fits the body line nicely. Will be using the GMC tail gate band so it will cover the chevy. Attached Images __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

06-30-2011, 04:25 PM	#31
1949gmc Registered User Join Date: Nov 2004 Location: Lindenhurst, IL Posts: 659	Re: 71 jimmy build That sure is a lot of welding and grinding. Your back must be killing you. How many days did it take to get the front and back finished up? Nice work!

07-01-2011, 02:02 AM	#32
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build It is defiantly back breaking work to say the least as everyone knows. Been building classics for 14 years now and I am young at 31 but every week it seems to get more difficult to do this work. To do all the metal work it took about 7 weeks total over a 6 month period. With building customs for friends and selling classic car parts as a full time job it is hard to find the time to work on my own projects and i have way to many. Although I had 26 cars a few years ago and now down to 7 cars/trucks. Thanks for all the comments __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

07-06-2011, 01:12 PM	#33
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build ... Attached Images __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

07-06-2011, 01:18 PM	#34
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build Got the front fenders and grille all fitted. After buying 5 top grille bars i still could not find a nice rust free or straight one so i ended up having the fix the best one of the 5. It took a lot of bending and pulling but it is now perfect. Attached Images __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

07-06-2011, 01:23 PM	#35
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build All the sheet metal work is finaly done and the tub is off the frame and ready for final blasting. Attached Images __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

07-06-2011, 01:31 PM	#36
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build All the front end chrome is ready and will be sent out to the chrome shop next week. This is going to put a dent in the pocket book. Attached Images __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

07-06-2011, 11:13 PM	#37
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	Re: 71 jimmy build lookin good man __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

07-07-2011, 02:26 PM	#39
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build Got the tub on the rotisserie today. Would like to start blasting but it is just too hot today to suit up and start that. Maybe by the weekend. Attached Images __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

07-07-2011, 02:31 PM	#40
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build I was so excited to get to this point that it looks like i forgot to put the cowl braces on. Just noticed it from the picture. opps!! Hope i didnt twist anything. Attached Images __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

07-07-2011, 07:06 PM	#41
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: 71 jimmy build That build is really coming along nicely! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry



Register or Log In To remove these advertisements.

07-07-2011, 08:43 PM	#42
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: 71 jimmy build Who is your chromer? I've used a few... Some great some completely not. Price sure varies, huh? Posted via Mobile Device

07-08-2011, 08:56 AM	#43
Luba Registered User Join Date: Sep 2005 Location: Bay City, MI Posts: 128	Re: 71 jimmy build What media do you use for blasting? I was thinking of having my tub soda blasted so metal won't warp.

07-12-2011, 01:28 PM	#46
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build Got the complete tub blasted over the weekend. Took several days to do because of the weather but it is done and ready for some epoxy. Attached Images __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

07-12-2011, 01:29 PM	#47
gm71jimmy 71 Jimmy under construction Join Date: Apr 2010 Location: Overton nv Posts: 380	Re: 71 jimmy build ... Attached Images __________________ 71 cheyenne 20 lwb 2x4 (daily driver) 72 Jimmy 4x4 drivable project 72 GMC truck 3/4 4x4 lwb (parted for jimmy) 63 Nova ss project

07-12-2011, 05:32 PM	#48
wholio Registered User Join Date: Oct 2009 Location: fort myers Posts: 320	Re: 71 jimmy build subscribe __________________ it aint custom unless you CUT IT!! My Restoration Begins on a 1969 k5

07-12-2011, 05:45 PM	#49
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: 71 jimmy build What will the chroming cost? I would also like to rechrome my originals. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

07-12-2011, 05:45 PM	#50
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: 71 jimmy build Nice work BTW __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

Register or Log In To remove these advertisements.