Spark plugs - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LOHRTBT · 04-03-2003, 07:51 PM

I like NGK's the best and then AC Delco's....I think Im gonna change mine out here soon. As soon as Its in the garage and I can take off the headers and all to do it..and finally get that other bolt in there where it belongs lol!!!

Figure with all my carb probs back and forth they are probably pretty pooopie by now.

New plugs never hurt!

MSL · 04-03-2003, 07:53 PM

whoops i was thinking of the carb that was on my truck before. ya its a 600cfm. ya im going to readjust my carb and recheck the timing.

LOHRTBT · 04-03-2003, 07:54 PM

page 2 Owned!! lol

79BIG10 · 04-03-2003, 07:57 PM

Sorry for the double post

MSL · 04-03-2003, 07:59 PM

ok why the double post.lol

MSL · 04-03-2003, 08:01 PM

Ok since where on sparkplugs what about wires.?

LOHRTBT · 04-03-2003, 08:06 PM

I love the MSD's I just put on. I got the 8.5 Super Conductors. They are awesome and have really nice thick boots. Not to mention that MSD has the best customer service dept that I have dealt with in a long time.

I burned up a brand new wire in one day...they sent me a replacement and I bought them from summit, no questions asked...just how long and where to send it free of charge.

MSL · 04-03-2003, 08:12 PM

Thats cool its allways nice to have good customer service when you need it. I will try out the msd wires how much did you pay for them?

bigd65 · 04-03-2003, 10:23 PM

AUTOLYTES here

LOHRTBT · 04-03-2003, 10:27 PM

If I remember right it was like 59 bucks....but i also ordered the fire jacket sleeves for them. IF your running headers I highly recommend them. They are about 50 a set. but worth the protection. Good for up to 1200 degrees.

MSL · 04-03-2003, 10:30 PM

No headers yet but i have deal on a set for $70 from my cousins friend i just have to go check them out and see what they are.

79BIG10 · 04-04-2003, 02:33 PM

MSD is the wires to go. I went to a Speed shop where they had a discplay setup and no matter how you set all the wires MSD has the lowest resistance.

04-03-2003, 07:51 PM	#26
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	I like NGK's the best and then AC Delco's....I think Im gonna change mine out here soon. As soon as Its in the garage and I can take off the headers and all to do it..and finally get that other bolt in there where it belongs lol!!! Figure with all my carb probs back and forth they are probably pretty pooopie by now. New plugs never hurt! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

04-03-2003, 07:54 PM	#28
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	page 2 Owned!! lol __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

04-03-2003, 07:57 PM	#29
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Sorry for the double post __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson Last edited by 79BIG10; 04-04-2003 at 02:31 PM.

04-03-2003, 08:06 PM	#32
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	I love the MSD's I just put on. I got the 8.5 Super Conductors. They are awesome and have really nice thick boots. Not to mention that MSD has the best customer service dept that I have dealt with in a long time. I burned up a brand new wire in one day...they sent me a replacement and I bought them from summit, no questions asked...just how long and where to send it free of charge. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

04-03-2003, 10:23 PM	#34
bigd65 Registered User Join Date: Mar 2000 Location: Clute, TX. Posts: 1,935	AUTOLYTES here __________________ 2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe

04-03-2003, 07:53 PM	#27
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	whoops i was thinking of the carb that was on my truck before. ya its a 600cfm. ya im going to readjust my carb and recheck the timing.

04-03-2003, 07:59 PM	#30
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	ok why the double post.lol

04-03-2003, 08:01 PM	#31
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	Ok since where on sparkplugs what about wires.?

04-03-2003, 08:12 PM	#33
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	Thats cool its allways nice to have good customer service when you need it. I will try out the msd wires how much did you pay for them?

04-03-2003, 10:27 PM	#35
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	If I remember right it was like 59 bucks....but i also ordered the fire jacket sleeves for them. IF your running headers I highly recommend them. They are about 50 a set. but worth the protection. Good for up to 1200 degrees. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

04-03-2003, 10:30 PM	#36
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	No headers yet but i have deal on a set for $70 from my cousins friend i just have to go check them out and see what they are.

04-04-2003, 02:33 PM	#37
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	MSD is the wires to go. I went to a Speed shop where they had a discplay setup and no matter how you set all the wires MSD has the lowest resistance. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.