1955 chevy short bed build.. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kabwe · 07-21-2011, 12:02 PM

Very nice, I'll be looking out for it at the local shows and meet and greets.

jimig1 · 07-21-2011, 05:46 PM

Quote:

Originally Posted by parkwood

I think the owner told me it was out of a ford but i'm not sure what.. who every put it did a nice job..
If you really need to know i'll call him and find out for you... no problem..

It's no big deal but it blended in nice.

**youngrodder** · 07-21-2011, 10:36 PM

Wayne-

Nice work. I have a friend with a 48 5 window that is the same color and same size and style wheels. This one reminds me of my friends. Looks like another great project by Wayne....

Marc

38 Hump · 07-22-2011, 12:08 PM

I've noticed in at least two of your builds that you install a complete headliner. Is there a molded piece on the market that you use as a base or is each one custom made for the individual project? I am at the point of deciding how to do my headliner on my '58 and am struggling with ideas. I'm in Lake Havasu, AZ and heat on the roof is a definite concern for any material attached to the roof.

01spirit750 · 07-22-2011, 02:49 PM

Sweet ride.

How did it sound with the exhaust exiting before the rear wheels (right under the steps)??

I was thinking about routing mine the same but I was concerned about the noice level in the cab.

Of course the mufflers will have a lot to do with the noise level.

solidaxel · 07-22-2011, 03:04 PM

Nice ride !!

You put them together faster than T V time!!

Daze57 · 07-22-2011, 07:03 PM

very nice indeed

STEVE60 · 07-22-2011, 08:24 PM

Nice ride.
It looks like they notched the frame for the fuel filler neck, did they do any boxing around it. I know there are not going to be much stress on the frame back there.
Do you know what tank they used?
Sorry for the question, but one day mine might look half as good as this one.
You guys are doing a good job, thanks for posting.
Steve

Daze57 · 07-23-2011, 08:16 PM

beautiful truck guys - you did great work !

parkwood · 07-24-2011, 12:52 AM

Quote:

Originally Posted by 38 Hump

I've noticed in at least two of your builds that you install a complete headliner. Is there a molded piece on the market that you use as a base or is each one custom made for the individual project? I am at the point of deciding how to do my headliner on my '58 and am struggling with ideas. I'm in Lake Havasu, AZ and heat on the roof is a definite concern for any material attached to the roof.

sent you a PM

parkwood · 07-24-2011, 12:53 AM

Quote:

Originally Posted by 01spirit750

Sweet ride.

How did it sound with the exhaust exiting before the rear wheels (right under the steps)??

I was thinking about routing mine the same but I was concerned about the noice level in the cab.

Of course the mufflers will have a lot to do with the noise level.

It didn't sound that bad, the motor was a mild 327 SB and not built...

parkwood · 07-24-2011, 12:54 AM

Quote:

Originally Posted by solidaxel

Nice ride !!

You put them together faster than T V time!!

Thanks Axel,, it helps a lot if they come to you with all body and paint work done like this one did...

01spirit750 · 07-24-2011, 12:59 AM

Quote:

Originally Posted by parkwood

It didn't sound that bad, the motor was a mild 327 SB and not built...

Thanks. I just finished installing the exhaust today. It is not to bad but definitely loud.

Of course I am using the Flowmaster 40 series (aka firecrackers in a steel garbage can). Add to it that I am running 420 hp sbc. In the future I may decide to finish running the exhaust out the back.

parkwood · 07-24-2011, 01:00 AM

Quote:

Originally Posted by STEVE60

Nice ride.
It looks like they notched the frame for the fuel filler neck, did they do any boxing around it. I know there are not going to be much stress on the frame back there.
Do you know what tank they used?
Sorry for the question, but one day mine might look half as good as this one.
You guys are doing a good job, thanks for posting.
Steve

Steve, no there was no boxing plate put around the notch but it would be a bad idea.. the tank was home made by someone years ago and it was big.. with gas prices today it would cost over a $100 bucks to fill it..
Glad you ask if i can help let me know.. wayne

parkwood · 07-24-2011, 01:01 AM

Quote:

Originally Posted by 01spirit750

Thanks. I just finished installing the exhaust today. It is not to bad but definitely loud.

Of course I am using the Flowmaster 40 series (aka firecrackers in a steel garbage can). Add to it that I am running 420 hp sbc. In the future I may decide to finish running the exhaust out the back.

Oh dude, with that motor you should run stacks.... or ear plugs.. ha ha

got flowmaster's on my nomad and it's loud and it goes out the back..

tantrumpipeline · 07-24-2011, 01:37 AM

BEAUTIFUL!!!!!!!!!! looks amazing

parkwood · 07-24-2011, 01:48 AM

Quote:

Originally Posted by tantrumpipeline

BEAUTIFUL!!!!!!!!!! looks amazing

Thanks glad you liked it...

OrrieG · 07-24-2011, 12:59 PM

Nice work, I really like the interior colors and carpet.

ChuckDriver · 07-24-2011, 04:07 PM

Nice work, truck looks amazing!!

parkwood · 07-25-2011, 03:01 AM

Quote:

Originally Posted by OrrieG

Nice work, I really like the interior colors and carpet.

Thanks a lot, the owner wanted something not to dark so this what the interior guy came up with.. smelled good too, all leather..

parkwood · 07-25-2011, 03:01 AM

Quote:

Originally Posted by ChuckDriver

Nice work, truck looks amazing!!

Thanks Chuck, glad you liked it..

57picupnewbie · 11-29-2011, 06:13 PM

Quote:

Originally Posted by 38 Hump

I've noticed in at least two of your builds that you install a complete headliner. Is there a molded piece on the market that you use as a base or is each one custom made for the individual project? I am at the point of deciding how to do my headliner on my '58 and am struggling with ideas. I'm in Lake Havasu, AZ and heat on the roof is a definite concern for any material attached to the roof.

I agree you have a nice ride and have the same question about the headliner. Can you let me know your ideas it is driving me crazy trying to figure the best way. Thanks.

Russell Ashley · 11-29-2011, 11:28 PM

That truck is fine, and I'm wondering about the headliner also.

I wish I'd looked closely at this thread before I installed my Vintage Aire a/c. I followed their instructions but I like the way you ran the hoses through the firewall much better.

lt155ruck · 11-30-2011, 12:18 AM

Quote:

Originally Posted by parkwood

Off to the interior shop for some soft leather...

That is a really nice looking truck. Question.. the interior pic of the inside of the roof. Is that the stock metal being wrapped or are there chipboard pieces covered? Really like to see some more interior pics. i'm getting ready to plan mine out and am looking for ideas. Thanks

lt155ruck · 11-30-2011, 12:26 AM

Wow, either I type really slowly or the roof question is a popular one.

07-21-2011, 12:02 PM	#26
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	Re: 1955 chevy short bed build.. Very nice, I'll be looking out for it at the local shows and meet and greets. Last edited by Kabwe; 07-21-2011 at 05:03 PM.

07-21-2011, 10:36 PM	#28
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,765	Re: 1955 chevy short bed build.. Wayne- Nice work. I have a friend with a 48 5 window that is the same color and same size and style wheels. This one reminds me of my friends. Looks like another great project by Wayne.... Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

07-22-2011, 12:08 PM	#29
38 Hump Registered User Join Date: Mar 2010 Location: Lake Havasu City, AZ Posts: 9	Re: 1955 chevy short bed build.. I've noticed in at least two of your builds that you install a complete headliner. Is there a molded piece on the market that you use as a base or is each one custom made for the individual project? I am at the point of deciding how to do my headliner on my '58 and am struggling with ideas. I'm in Lake Havasu, AZ and heat on the roof is a definite concern for any material attached to the roof.

07-22-2011, 02:49 PM	#30
01spirit750 Registered User Join Date: Oct 2010 Location: Bay Area California Posts: 137	Re: 1955 chevy short bed build.. Sweet ride. How did it sound with the exhaust exiting before the rear wheels (right under the steps)?? I was thinking about routing mine the same but I was concerned about the noice level in the cab. Of course the mufflers will have a lot to do with the noise level.

07-22-2011, 03:04 PM	#31
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: 1955 chevy short bed build.. Nice ride !! You put them together faster than T V time!! __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

07-22-2011, 07:03 PM	#32
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: 1955 chevy short bed build.. very nice indeed

07-22-2011, 08:24 PM	#33
STEVE60 Registered User Join Date: Apr 2011 Location: Inman SC Posts: 29	Re: 1955 chevy short bed build.. Nice ride. It looks like they notched the frame for the fuel filler neck, did they do any boxing around it. I know there are not going to be much stress on the frame back there. Do you know what tank they used? Sorry for the question, but one day mine might look half as good as this one. You guys are doing a good job, thanks for posting. Steve

07-23-2011, 08:16 PM	#34
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: 1955 chevy short bed build.. beautiful truck guys - you did great work !

07-24-2011, 01:37 AM	#41
tantrumpipeline Master Procrastinator Join Date: Sep 2009 Location: Grande Prairie AB Canada Posts: 1,128	Re: 1955 chevy short bed build.. BEAUTIFUL!!!!!!!!!! looks amazing __________________ My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506 20 Duramax tow pig 68 2wd short stepper project 77 2wd short fleet beater 52 short project

07-24-2011, 12:59 PM	#43
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: 1955 chevy short bed build.. Nice work, I really like the interior colors and carpet. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

07-24-2011, 04:07 PM	#44
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,622	Re: 1955 chevy short bed build.. Nice work, truck looks amazing!! __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

11-29-2011, 11:28 PM	#48
Russell Ashley Registered User Join Date: May 2010 Location: Lawrenceville, Ga Posts: 2,641	Re: 1955 chevy short bed build.. That truck is fine, and I'm wondering about the headliner also. I wish I'd looked closely at this thread before I installed my Vintage Aire a/c. I followed their instructions but I like the way you ran the hoses through the firewall much better.

11-30-2011, 12:26 AM	#50
lt155ruck Registered User Join Date: Jul 2010 Location: Victoria,B.C. Canada Posts: 175	Re: 1955 chevy short bed build.. Wow, either I type really slowly or the roof question is a popular one.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.