KS Some Big Block motors and parts for Big Blocks - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 07-29-2011, 10:31 PM

Randy,

Is the cab any good on this blue 70 gmc? Is it spoken for already? Can't remember maybe you;ve already posted pics of it?

teeitup · 07-30-2011, 09:33 AM

Mike, I may have one of those out there on 70 BB, I can look Wed

Paul, I'll get with you on starter, as for the heat shield, I bought a blazer for a member and I traded the heat shield as part of the deal sorry

Steve, alt brackets are yours, You can pay pal me if you want. Hope the other stuff got there OK

Brad, I'd rather keep carb stuff all together, sorry. I should have a good Ac control out there, If so $36 shipped

Steve, I'll check them out later this week

Jud, Cab is a NON Ac cab, Eric is looking at it too. It has rocker and cab corner rust and a litttle kick panel rust. There are some pics of it close to the end of my 67 thread. I'm pricing it for $500. You 2 guys are first in line on it then I have a local guy asking about it too

Thanks Randy

6772iron · 07-30-2011, 02:40 PM

Randy sounds good I'll take it pm me let me know where to send or paypal the money You can send it with the toolbox door or whatever your call no hurry thanks Brad

**Cash3481** · 07-30-2011, 11:23 PM

Randy,
I will wait till you see about the carb spacer before I send the paypal on the dipstick next week. It will save the shipping and your trouble. no rush though, I don't work as fast as I acquire. Lol Enjoy the family time!
Posted via Mobile Device

HDBOB · 07-31-2011, 12:08 AM

Hey Randy,
As you might have figured. I am going from th350 to 400 . I bought a kickdown switch from you and i have the linkage to frame bracket. Do you know if I will need anything else , and if so, do you have it ?
Thanks !!

teeitup · 07-31-2011, 12:36 AM

Brad, OK I hopefully have a good one, I'll get with you later this week

Mike, I'll check on spacer this week

Bob, you should have everything you need with linkage and the kickdown setup

Thanks Randy

streetstrip1972 · 07-31-2011, 09:00 PM

where any of the trucks BB four speeds if so ill buy the all of the linkage

thanks bobby

HDBOB · 07-31-2011, 11:23 PM

Randy,
So I assume the linkage is the same ,the only difference being the frame bracket ?

teeitup · 08-01-2011, 12:03 AM

Bobby, yes some were 4 speeds but sorry I don't have any 4 speed ones

Bob, the turbo 400 has different linkage and frame bracket. The th350 is different. I forgot the yoke for driveshaft is different too

Thanks Randy

HDBOB · 08-01-2011, 12:18 AM

I have the yoke, Do you have the linkage ?

teeitup · 08-01-2011, 12:28 AM

Yes sir $50 shipped for a setup

HDBOB · 08-01-2011, 12:34 AM

Was the 50 dollar set up aimed at me ? if so what is included ?

teeitup · 08-01-2011, 12:35 AM

Yes to you Bob. Has it all except 2 bolts that hold the bracket to frame, they are just standard bolts

HDBOB · 08-01-2011, 12:43 AM

Randy,
I appreciate your help ,but this build is killing me. I hate to ask but, Is that the best you can do for me ?

Monty · 08-01-2011, 09:53 AM

carb still available? what all is included? (choke stuff, air cleaner stud, PCV hose, ect...)

teeitup · 08-01-2011, 10:19 AM

Bob, I'd go $45

Monty, yes all that stuff comes with it but not he kickdown switch or linkage

Thanks Randy

Monty · 08-01-2011, 12:35 PM

ok. i'll take the carb. PM me your address and i'll get a money order in the mail today.

coops714x4 · 08-01-2011, 05:59 PM

Hey Randy I broke my signal light lever I know you got a decent one PM me with cost shipped to 73018 COOP

68c20lwb · 08-01-2011, 06:58 PM

do you have a BB clutch ball bracket? shipped to 55437?

teeitup · 08-01-2011, 08:51 PM

Monty, I'll pm you

Coop, I'll send you one, send me you info

68c20lwb, sorry none right now

Thanks Randy

Duncan and son · 08-01-2011, 11:08 PM

Hey Randy the starter no. we need is 1108418 and nearly any 71-72 date code will work as Jason's truck was built toward the end of the 72 run.
Thought that might help....Paul

HDBOB · 08-01-2011, 11:25 PM

Ok Randy,
What I cant afford, is to be held up by a $45 part. I think I have it but, could you PM me your PP Info ? Also , The motor is in as of tonight. If you could send that east as soon as you can , I would surely appreciate it.

teeitup · 08-01-2011, 11:32 PM

Paul, I'll try to get it checked out Wed

Bob, I won't be able to ship till Wed at the earliest

Thanks Randy

HDBOB · 08-01-2011, 11:34 PM

Wed's cool. Thanks

HDBOB · 08-02-2011, 09:54 AM

hey Randy,
Under my truck last night. The two piece drive shaft I had planned to install, has no where to hang the carrier. Is there a bracket i am missing ? If so, Can one be installed without jacking up the bed ?

07-29-2011, 10:31 PM	#26
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Some Big Block motors and parts for Big Blocks Randy, Is the cab any good on this blue 70 gmc? Is it spoken for already? Can't remember maybe you;ve already posted pics of it? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-30-2011, 09:33 AM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some Big Block motors and parts for Big Blocks Mike, I may have one of those out there on 70 BB, I can look Wed Paul, I'll get with you on starter, as for the heat shield, I bought a blazer for a member and I traded the heat shield as part of the deal sorry Steve, alt brackets are yours, You can pay pal me if you want. Hope the other stuff got there OK Brad, I'd rather keep carb stuff all together, sorry. I should have a good Ac control out there, If so $36 shipped Steve, I'll check them out later this week Jud, Cab is a NON Ac cab, Eric is looking at it too. It has rocker and cab corner rust and a litttle kick panel rust. There are some pics of it close to the end of my 67 thread. I'm pricing it for $500. You 2 guys are first in line on it then I have a local guy asking about it too Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-30-2011, 02:40 PM	#28
6772iron Registered User Join Date: Jul 2011 Location: q-ville pa Posts: 33	Re: Some Big Block motors and parts for Big Blocks Randy sounds good I'll take it pm me let me know where to send or paypal the money You can send it with the toolbox door or whatever your call no hurry thanks Brad

07-30-2011, 11:23 PM	#29
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Some Big Block motors and parts for Big Blocks Randy, I will wait till you see about the carb spacer before I send the paypal on the dipstick next week. It will save the shipping and your trouble. no rush though, I don't work as fast as I acquire. Lol Enjoy the family time! Posted via Mobile Device

07-31-2011, 12:08 AM	#30
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: Some Big Block motors and parts for Big Blocks Hey Randy, As you might have figured. I am going from th350 to 400 . I bought a kickdown switch from you and i have the linkage to frame bracket. Do you know if I will need anything else , and if so, do you have it ? Thanks !!

07-31-2011, 12:36 AM	#31
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some Big Block motors and parts for Big Blocks Brad, OK I hopefully have a good one, I'll get with you later this week Mike, I'll check on spacer this week Bob, you should have everything you need with linkage and the kickdown setup Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-31-2011, 09:00 PM	#32
streetstrip1972 Registered User Join Date: Nov 2008 Location: orange ca Posts: 9	Re: Some Big Block motors and parts for Big Blocks where any of the trucks BB four speeds if so ill buy the all of the linkage thanks bobby

07-31-2011, 11:23 PM	#33
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: Some Big Block motors and parts for Big Blocks Randy, So I assume the linkage is the same ,the only difference being the frame bracket ?

08-01-2011, 12:03 AM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some Big Block motors and parts for Big Blocks Bobby, yes some were 4 speeds but sorry I don't have any 4 speed ones Bob, the turbo 400 has different linkage and frame bracket. The th350 is different. I forgot the yoke for driveshaft is different too Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-01-2011, 12:18 AM	#35
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: Some Big Block motors and parts for Big Blocks I have the yoke, Do you have the linkage ?

08-01-2011, 12:28 AM	#36
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some Big Block motors and parts for Big Blocks Yes sir $50 shipped for a setup __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-01-2011, 12:34 AM	#37
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: Some Big Block motors and parts for Big Blocks Was the 50 dollar set up aimed at me ? if so what is included ?

08-01-2011, 12:35 AM	#38
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some Big Block motors and parts for Big Blocks Yes to you Bob. Has it all except 2 bolts that hold the bracket to frame, they are just standard bolts __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-01-2011, 12:43 AM	#39
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: Some Big Block motors and parts for Big Blocks Randy, I appreciate your help ,but this build is killing me. I hate to ask but, Is that the best you can do for me ?

08-01-2011, 09:53 AM	#40
Monty Registered User Join Date: Jun 2011 Location: Montana Posts: 78	Re: Some Big Block motors and parts for Big Blocks carb still available? what all is included? (choke stuff, air cleaner stud, PCV hose, ect...)



Register or Log In To remove these advertisements.

08-01-2011, 10:19 AM	#41
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some Big Block motors and parts for Big Blocks Bob, I'd go $45 Monty, yes all that stuff comes with it but not he kickdown switch or linkage Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-01-2011 at 10:31 AM.

08-01-2011, 12:35 PM	#42
Monty Registered User Join Date: Jun 2011 Location: Montana Posts: 78	Re: Some Big Block motors and parts for Big Blocks ok. i'll take the carb. PM me your address and i'll get a money order in the mail today.

08-01-2011, 05:59 PM	#43
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: Some Big Block motors and parts for Big Blocks Hey Randy I broke my signal light lever I know you got a decent one PM me with cost shipped to 73018 COOP __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

08-01-2011, 06:58 PM	#44
68c20lwb Registered User Join Date: Mar 2011 Location: Hankinson, ND Posts: 190	Re: Some Big Block motors and parts for Big Blocks do you have a BB clutch ball bracket? shipped to 55437? __________________ 1968 C20 450hp 425ft-lbs 454/SM465 4.56's 2004 HD rims, needs paint and a 5th gear! 1969 C30 Open Road Motorhome 350/th400 1972 K10 350/350/205 Daily Driver -SOLD

08-01-2011, 08:51 PM	#45
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some Big Block motors and parts for Big Blocks Monty, I'll pm you Coop, I'll send you one, send me you info 68c20lwb, sorry none right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-01-2011, 11:08 PM	#46
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: Some Big Block motors and parts for Big Blocks Hey Randy the starter no. we need is 1108418 and nearly any 71-72 date code will work as Jason's truck was built toward the end of the 72 run. Thought that might help....Paul __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

08-01-2011, 11:25 PM	#47
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: Some Big Block motors and parts for Big Blocks Ok Randy, What I cant afford, is to be held up by a $45 part. I think I have it but, could you PM me your PP Info ? Also , The motor is in as of tonight. If you could send that east as soon as you can , I would surely appreciate it.

08-01-2011, 11:32 PM	#48
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some Big Block motors and parts for Big Blocks Paul, I'll try to get it checked out Wed Bob, I won't be able to ship till Wed at the earliest Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-01-2011 at 11:38 PM.

08-01-2011, 11:34 PM	#49
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: Some Big Block motors and parts for Big Blocks Wed's cool. Thanks

08-02-2011, 09:54 AM	#50
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: Some Big Block motors and parts for Big Blocks hey Randy, Under my truck last night. The two piece drive shaft I had planned to install, has no where to hang the carrier. Is there a bracket i am missing ? If so, Can one be installed without jacking up the bed ?

Register or Log In To remove these advertisements.