TN PARTING 72 GMC 2wd longbed leaf lowered truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BarryB · 07-30-2011, 04:27 PM

I'm definitely interested in the pass. fender possibly the drivers pending if it gets to me. I live in Blountville so I can pick them up. PM me please if it gets to my turn.

70BLAZERX2 · 07-30-2011, 07:51 PM

I will look at the wiring ..it is factory a/c without gauges...My truck is with gauges,so i will just reuse my harness..

there is a step bumper with ball on it,no hitch..

Quote:

Originally Posted by missinfishin10

What kind of shape is the under hood, engine, AC wiring harness including everything from the firewall out? You mentioned Trailer wiring... does it have a bolt on hitch?

missinfishin10 · 07-30-2011, 08:10 PM

Oh ok, I have gauges too so I guest that harness wont work for me. If you want, I can paypal you for the trim rings and spinner caps now, or we can wait on fender pics.

Thanks! Jeff

70BLAZERX2 · 07-30-2011, 08:17 PM

Quote:

Originally Posted by missinfishin10

Oh ok, I have gauges too so I guest that harness wont work for me. If you want, I can paypal you for the trim rings and spinner caps now, or we can wait on fender pics.

Thanks! Jeff

Its an odd option truck has am/fm radio stock too but its long gone..many have the harness in there for it..

give me 2 days to get the fender off..and those rings and caps have your name on them,still on truck.

Name: ww5.JPG
Views: 385
Size: 88.2 KB

missinfishin10 · 07-30-2011, 09:02 PM

No hurry! My truck is months... from being driven. When you get to is fine.
I'll keep thinking of things I need. Maybe we can get a "Bundle Deal' together.

Sarge · 07-30-2011, 10:28 PM

looking for power steering bracket, the one for the front of the pump. If you have it, how much to 13135? Thanks much

Monty · 07-31-2011, 10:58 AM

i'm looking for spring hangers (front of rear) to install leafs into my '72 trailing arm frame. (4x2 to 4x4 swap w/64" rears)

gotta be 1.25" from vertical frame surface to inside edge of spring eye, with 9/16 spring eye bolt hole, and for 2.5" wide springs (3" opening for spring eye).

if yours will work, and are in good shape, put a price on 'em.

70BLAZERX2 · 07-31-2011, 08:10 PM

Quote:

Originally Posted by missinfishin10

No hurry! My truck is months... from being driven. When you get to is fine.
I'll keep thinking of things I need. Maybe we can get a "Bundle Deal' together.

yes i can do a "Bundle Deal" no problem...keep thinking..

70BLAZERX2 · 07-31-2011, 08:11 PM

Quote:

Originally Posted by Sarge

looking for power steering bracket, the one for the front of the pump. If you have it, how much to 13135? Thanks much

I may have one off..let me look,Thanks

70BLAZERX2 · 07-31-2011, 08:12 PM

Quote:

Originally Posted by Monty

i'm looking for spring hangers (front of rear) to install leafs into my '72 trailing arm frame. (4x2 to 4x4 swap w/64" rears)

gotta be 1.25" from vertical frame surface to inside edge of spring eye, with 9/16 spring eye bolt hole, and for 2.5" wide springs (3" opening for spring eye).

if yours will work, and are in good shape, put a price on 'em.

let me measure them and see what they are..Thanks

chase1873 · 08-15-2011, 12:41 AM

interested in the disk breaks... spindles included?? pm me please

70BLAZERX2 · 08-16-2011, 02:28 PM

ok update..i have been busy working here at home..now much computer time..

I am going to use the front clip complete and the bed on a 4x4 project..
the cab is for my rollback..

rest will be for parts.

I need your zip for a shipping quote for the pair of front spindles..

they are stock 72...the front coils were heated with a torch.

will you need the rotors? that will save you some shipping cost..and they are now much new.

70BLAZERX2 · 08-20-2011, 07:19 PM

Quote:

Originally Posted by jim-bob

..did you sell the steering pump BRACKET? if not, how much?

I still have the complete p/s changerover if someone needs that..pump,bracket,box and pulley for small bolck

I would rather sell the pump with bracket.

TrkEnvy · 08-21-2011, 02:17 AM

Would you sell the column shifter arm and knob?? My truck is missing it from when it was made a floor shift. Terrible job... Oh and how much if you would??

70BLAZERX2 · 08-21-2011, 07:23 PM

Quote:

Originally Posted by TrkEnvy

Would you sell the column shifter arm and knob?? My truck is missing it from when it was made a floor shift. Terrible job... Oh and how much if you would??

I have several of those off $15 shipped

let me get in my toolbox and get you a pic of one..Thanks,Erick

Wscott9689 · 08-22-2011, 03:07 PM

are the manifolds still available? if so can i get pics? thanks

70BLAZERX2 · 08-22-2011, 03:34 PM

Quote:

Originally Posted by Wscott9689

are the manifolds still available? if so can i get pics? thanks

sorry manifolds were sold..a while back.

RJGeister · 08-22-2011, 10:16 PM

Are the sport mirror screws and plates any good? Would be interested.

Thanks,
Rich Geister

lt72jimmy · 08-22-2011, 10:41 PM

do you have a pic of the front bumper?

LT

SPIRIT OF 76 CHEVY · 08-28-2011, 03:36 AM

I need a good driver grill for now and also like a of the bumper thanks
Posted via Mobile Device

tow guys · 08-28-2011, 10:25 AM

Would you happen to have the part off the parking brake setup that connects the cable to the rod on the front passenger side??
Looks like this
http://67-72chevytrucks.com/vboard/a...1&d=1211266788

70BLAZERX2 · 08-28-2011, 02:44 PM

Quote:

Originally Posted by RJGeister

Are the sport mirror screws and plates any good? Would be interested.

Thanks,
Rich Geister

i want to keep the mirrors on the doors for now..thanks

70BLAZERX2 · 08-28-2011, 02:45 PM

Quote:

Originally Posted by lt72jimmy

do you have a pic of the front bumper?

LT

the front bumper is bent some..i will get more and better pics

70BLAZERX2 · 08-28-2011, 02:48 PM

Quote:

Originally Posted by SPIRIT OF 76 CHEVY

I need a good driver grill for now and also like a of the bumper thanks
Posted via Mobile Device

$200 for the grille,front bumper..with headlight bezels.

grille will clean up good...not a show piece but great for as old as it is.

I can even meet you around asheville nc or below knoxville tn somewhere..if interested.

70BLAZERX2 · 08-28-2011, 02:49 PM

Quote:

Originally Posted by tow guys

Would you happen to have the part off the parking brake setup that connects the cable to the rod on the front passenger side??
Looks like this
http://67-72chevytrucks.com/vboard/a...1&d=1211266788

that should be on there..i will have to look..

07-30-2011, 04:27 PM	#26
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: PARTING 72 GMC 2wd longbed leaf lowered truck I'm definitely interested in the pass. fender possibly the drivers pending if it gets to me. I live in Blountville so I can pick them up. PM me please if it gets to my turn. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

07-30-2011, 08:10 PM	#28
missinfishin10 Amazed Member Join Date: May 2010 Location: Dahlonega Georgia Posts: 486	Re: PARTING 72 GMC 2wd longbed leaf lowered truck Oh ok, I have gauges too so I guest that harness wont work for me. If you want, I can paypal you for the trim rings and spinner caps now, or we can wait on fender pics. Thanks! Jeff __________________ 71 LWB Fleetside 1950 3100 Original Project!

07-30-2011, 09:02 PM	#30
missinfishin10 Amazed Member Join Date: May 2010 Location: Dahlonega Georgia Posts: 486	Re: PARTING 72 GMC 2wd longbed leaf lowered truck No hurry! My truck is months... from being driven. When you get to is fine. I'll keep thinking of things I need. Maybe we can get a "Bundle Deal' together. __________________ 71 LWB Fleetside 1950 3100 Original Project!

07-30-2011, 10:28 PM	#31
Sarge Registered User Join Date: Jul 2011 Location: syracuse ny Posts: 18	Re: PARTING 72 GMC 2wd longbed leaf lowered truck looking for power steering bracket, the one for the front of the pump. If you have it, how much to 13135? Thanks much

07-31-2011, 10:58 AM	#32
Monty Registered User Join Date: Jun 2011 Location: Montana Posts: 78	Re: PARTING 72 GMC 2wd longbed leaf lowered truck i'm looking for spring hangers (front of rear) to install leafs into my '72 trailing arm frame. (4x2 to 4x4 swap w/64" rears) gotta be 1.25" from vertical frame surface to inside edge of spring eye, with 9/16 spring eye bolt hole, and for 2.5" wide springs (3" opening for spring eye). if yours will work, and are in good shape, put a price on 'em.

08-15-2011, 12:41 AM	#36
chase1873 Registered User Join Date: Jul 2010 Location: Boston, MA Posts: 97	Re: PARTING 72 GMC 2wd longbed leaf lowered truck interested in the disk breaks... spindles included?? pm me please __________________ Mike 1970 C10 swb step side... needs everything.

08-16-2011, 02:28 PM	#37
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: PARTING 72 GMC 2wd longbed leaf lowered truck ok update..i have been busy working here at home..now much computer time.. I am going to use the front clip complete and the bed on a 4x4 project.. the cab is for my rollback.. rest will be for parts. I need your zip for a shipping quote for the pair of front spindles.. they are stock 72...the front coils were heated with a torch. will you need the rotors? that will save you some shipping cost..and they are now much new.

08-21-2011, 02:17 AM	#39
TrkEnvy Registered User Join Date: Apr 2011 Location: Las Vegas, NV Posts: 264	Re: PARTING 72 GMC 2wd longbed leaf lowered truck Would you sell the column shifter arm and knob?? My truck is missing it from when it was made a floor shift. Terrible job... Oh and how much if you would??

08-22-2011, 03:07 PM	#41
Wscott9689 Registered User Join Date: Jul 2011 Location: Tupelo, ms Posts: 86	Re: PARTING 72 GMC 2wd longbed leaf lowered truck are the manifolds still available? if so can i get pics? thanks

08-22-2011, 10:16 PM	#43
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: PARTING 72 GMC 2wd longbed leaf lowered truck Are the sport mirror screws and plates any good? Would be interested. Thanks, Rich Geister

08-22-2011, 10:41 PM	#44
lt72jimmy Registered User Join Date: Apr 2010 Location: van buren, Arkansas Posts: 2	Re: PARTING 72 GMC 2wd longbed leaf lowered truck do you have a pic of the front bumper? LT

08-28-2011, 03:36 AM	#45
SPIRIT OF 76 CHEVY Registered User Join Date: Mar 2009 Location: ATL, GA Posts: 722	Re: PARTING 72 GMC 2wd longbed leaf lowered truck I need a good driver grill for now and also like a of the bumper thanks Posted via Mobile Device __________________ Stan's short bed fleet 69 custom deluxe swb 69 custom swb shop truck 70 custom sport truck swb 72 GMC super custom swb 72 Custom/10 swb inline 6 auto p/s p/b 77 silverado swb 86 Buick Grand National 92 silverado sport swb 06 silverado crew cab 07 caddy sts 08 f250 4x4 crew cab Sold!!! 12 dodge ram 1500 big horn

08-28-2011, 10:25 AM	#46
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: PARTING 72 GMC 2wd longbed leaf lowered truck Would you happen to have the part off the parking brake setup that connects the cable to the rod on the front passenger side?? Looks like this http://67-72chevytrucks.com/vboard/a...1&d=1211266788 __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.