MO Project part out lots of new parts. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

james97cobra · 07-31-2011, 07:09 PM

Quote:

Originally Posted by gcburdic

interested in the drop spindles....can you get me the part number for these?

The item number on the invoice is CP4S4. Hope this helps.

Leroy-B1 · 07-31-2011, 07:45 PM

Interested in spindles and inners shipped to 28787
Posted via Mobile Device

Timbo1 · 07-31-2011, 07:52 PM

I'm going to pass on the Wilwood calipers, thanks Tim
Posted via Mobile Device

kingsolver72 · 07-31-2011, 08:09 PM

Any info on the frame or pictures? Is it frame only? Does it come with front cross member,spindles and rear end?

The Youngen · 07-31-2011, 08:12 PM

Next in line on the fenders. Shipping to 06498 please.

james97cobra · 07-31-2011, 08:13 PM

Quote:

Originally Posted by kingsolver72

Any info on the frame or pictures? Is it frame only? Does it come with front cross member,spindles and rear end?

Frame only with CPP c notches installed. I have a lot of the front end stuff that I can make you a deal on.

james97cobra · 07-31-2011, 08:20 PM

As far as shipping goes on the inner fenders, I don't know how to even get a quote on what shipping would cost. What does everyone normally use to ship something this large?

Leroy-B1 · 07-31-2011, 08:37 PM

Greyhound on shipping inners stacked on rope and wrapped......tell me more about the gas tank...looking for one for my 48 truck
Posted via Mobile Device

gcburdic · 07-31-2011, 09:22 PM

Quote:

Originally Posted by james97cobra

The item number on the invoice is CP4S4. Hope this helps.

James...Thanks for the part#...CPP part#CP4S4=73-87 2.5" drop spindles

I'll pass to the next guy....

VA72C10 · 07-31-2011, 09:49 PM

Interested in all the front end parts if they don't sell with the frame...what brand and year?

VA72C10 · 07-31-2011, 09:51 PM

Are they 73-87 to work with the spindles then? Might be interested in the parts and the spindles....let me know. thanks

james97cobra · 07-31-2011, 09:55 PM

Ya all my front end stuff was 73-87 stuff. I have everything with new drop spindles, brand new rotors, and wilwood calipers I could make someone a heck of a deal on all of it.

DeputyDan · 08-01-2011, 02:32 AM

Would you be willing to take $100 shipped for the wiring harness? They sell for around $150 at gearhead enterprises. I included the link below.

http://www.gearheadworld.com/store/2...PAR-P3070.aspx

james97cobra · 08-01-2011, 02:46 AM

I will pass on the $100. I couldn't find one exactly like mine on there either but that one didn't included the switches and had one less circuit. On ebay a 21 circuit harness with switches is $250 shipped and is identical to mine.

I believe this one is more like mine:

http://www.gearheadworld.com/store/W...A-P493C20.aspx

Or this one:

http://cgi.ebay.com/ebaymotors/GH-21...Q5fAccessories

brownge · 08-01-2011, 08:53 AM

I'll pass on the mounts. Thanks.

**Todd68Chevy** · 08-01-2011, 09:06 AM

Quote:

Originally Posted by james97cobra

Todd68chevy- Not sure one the harness. It is in my storage unit and i'm off work tomorrow so I will go get that info for you then.

I have used Gearhead harnesses before. I believe they are very nice and great for the money. The fuse box in this one looks more stock than the cheaper 20 circuit set up. What would shipping be to a business address at zip code 47882. Thanks for your time and effort. Todd

james97cobra · 08-01-2011, 10:32 PM

Quote:

Originally Posted by Todd68Chevy

I have used Gearhead harnesses before. I believe they are very nice and great for the money. The fuse box in this one looks more stock than the cheaper 20 circuit set up. What would shipping be to a business address at zip code 47882. Thanks for your time and effort. Todd

I will do it for 10 and eat the rest. Thanks.
Posted via Mobile Device

**Todd68Chevy** · 08-02-2011, 07:14 AM

Quote:

Originally Posted by james97cobra

I will do it for 10 and eat the rest. Thanks.
Posted via Mobile Device

PM sent. Thanks, Todd

bguild · 08-02-2011, 09:35 AM

I am out on the frame.. I didnt realize it was a leaf spring. I want a coil.

Custom 68 · 08-02-2011, 11:11 PM

pm sent on calipers, there seems to be two different piston sizes do you know which ones these are? there is a 2 inch diameter and like a 1 1/8 inch diameter.
Anyway my rotors are the 1.25 thick so i am good to go.

**Todd68Chevy** · 08-03-2011, 10:46 AM

Quote:

Originally Posted by Todd68Chevy

Interested in the 21 circuit universal wiring harness with switches. $200 What brand? Part # if possible. Thanks, Todd

Quote:

Originally Posted by james97cobra

The only thing that the box said on it was that it came from Gearhead Enterprises. All the wires are color coded and labeled, and all the switches are Keep It Clean brand. It's a really nice looking set up.

Payment sent. Thanks, Todd

eagleuh1 · 08-03-2011, 11:41 PM

Can you do $560 on the gas tank? Waiting on another group buy, but if so I'd take it. Thanks. Jim

eagleuh1 · 08-04-2011, 11:24 AM

I'll take the tank for $600 if can pick up on Friday around noon. Thanks. Jim. Will have cash in hand or pocket.

james97cobra · 08-04-2011, 12:40 PM

Sounds good thanks a lot.
Posted via Mobile Device

suspect · 08-04-2011, 08:08 PM

i see that todd68chevy sent payment for the wire harness. congrats, but if the deal somehow gets reversed, let me know. i can pick up locally this weekend.

07-31-2011, 07:45 PM	#27
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Project part out lots of new parts. Interested in spindles and inners shipped to 28787 Posted via Mobile Device

07-31-2011, 07:52 PM	#28
Timbo1 Registered User Join Date: Apr 2011 Location: Gilbert Az Posts: 260	Re: Project part out lots of new parts. I'm going to pass on the Wilwood calipers, thanks Tim Posted via Mobile Device

07-31-2011, 08:09 PM	#29
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,206	Re: Project part out lots of new parts. Any info on the frame or pictures? Is it frame only? Does it come with front cross member,spindles and rear end? __________________ Fight the good fight, finish the race, keep the faith

07-31-2011, 08:12 PM	#30
The Youngen Registered User Join Date: Oct 2010 Location: Westbrook CT Posts: 81	Re: Project part out lots of new parts. Next in line on the fenders. Shipping to 06498 please. __________________ 71 Chevy C10 350/TH350 71 GMC C20 350 (donor truck) 82 Chevy K20 Suburban 6.2/TH400/NP 95 Chevy 4x4 1500 Tahoe 6.5T/4L80E 04 Chevy 4x4 3500 Silverado 6.6T Duramax/Allison 1000 (work truck) 09 Chevy Aveo 1.6L/5 speed manual

07-31-2011, 08:20 PM	#32
james97cobra Registered User Join Date: Jan 2011 Location: Joplin Missouri Posts: 76	Re: Project part out lots of new parts. As far as shipping goes on the inner fenders, I don't know how to even get a quote on what shipping would cost. What does everyone normally use to ship something this large?

07-31-2011, 08:37 PM	#33
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Project part out lots of new parts. Greyhound on shipping inners stacked on rope and wrapped......tell me more about the gas tank...looking for one for my 48 truck Posted via Mobile Device

07-31-2011, 09:49 PM	#35
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project part out lots of new parts. Interested in all the front end parts if they don't sell with the frame...what brand and year? __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-31-2011, 09:51 PM	#36
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project part out lots of new parts. Are they 73-87 to work with the spindles then? Might be interested in the parts and the spindles....let me know. thanks __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-31-2011, 09:55 PM	#37
james97cobra Registered User Join Date: Jan 2011 Location: Joplin Missouri Posts: 76	Re: Project part out lots of new parts. Ya all my front end stuff was 73-87 stuff. I have everything with new drop spindles, brand new rotors, and wilwood calipers I could make someone a heck of a deal on all of it.

08-01-2011, 02:32 AM	#38
DeputyDan Registered User Join Date: Oct 2010 Location: Missouri Posts: 165	Re: Project part out lots of new parts. Would you be willing to take $100 shipped for the wiring harness? They sell for around $150 at gearhead enterprises. I included the link below. http://www.gearheadworld.com/store/2...PAR-P3070.aspx

08-01-2011, 02:46 AM	#39
james97cobra Registered User Join Date: Jan 2011 Location: Joplin Missouri Posts: 76	Re: Project part out lots of new parts. I will pass on the $100. I couldn't find one exactly like mine on there either but that one didn't included the switches and had one less circuit. On ebay a 21 circuit harness with switches is $250 shipped and is identical to mine. I believe this one is more like mine: http://www.gearheadworld.com/store/W...A-P493C20.aspx Or this one: http://cgi.ebay.com/ebaymotors/GH-21...Q5fAccessories

08-01-2011, 08:53 AM	#40
brownge Registered User Join Date: Jun 2008 Location: Magnolia, TX Posts: 224	Re: Project part out lots of new parts. I'll pass on the mounts. Thanks.

08-02-2011, 09:35 AM	#44
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: Project part out lots of new parts. I am out on the frame.. I didnt realize it was a leaf spring. I want a coil. __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

08-02-2011, 11:11 PM	#45
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,928	Re: Project part out lots of new parts. pm sent on calipers, there seems to be two different piston sizes do you know which ones these are? there is a 2 inch diameter and like a 1 1/8 inch diameter. Anyway my rotors are the 1.25 thick so i am good to go. __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

08-03-2011, 11:41 PM	#47
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: Project part out lots of new parts. Can you do $560 on the gas tank? Waiting on another group buy, but if so I'd take it. Thanks. Jim



Register or Log In To remove these advertisements.

08-04-2011, 11:24 AM	#48
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: Project part out lots of new parts. I'll take the tank for $600 if can pick up on Friday around noon. Thanks. Jim. Will have cash in hand or pocket.

08-04-2011, 12:40 PM	#49
james97cobra Registered User Join Date: Jan 2011 Location: Joplin Missouri Posts: 76	Re: Project part out lots of new parts. Sounds good thanks a lot. Posted via Mobile Device

08-04-2011, 08:08 PM	#50
suspect Registered User Join Date: Jul 2011 Location: oklahoma city Posts: 692	Re: Project part out lots of new parts. i see that todd68chevy sent payment for the wire harness. congrats, but if the deal somehow gets reversed, let me know. i can pick up locally this weekend.

Register or Log In To remove these advertisements.