KS parting a 69 chevy 1 ton now - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 09-02-2011, 06:43 AM

no moa, Glen, it has hose, its cracked on in, BU I think it can be cut off and still work

454stepside, delete is yours

Thanks Randy

OLEBEATER · 09-02-2011, 07:46 AM

Is the carb spacer on this truck spoken for?

no moa · 09-02-2011, 12:20 PM

Quote:

Originally Posted by teeitup

no moa, Glen, it has hose, its cracked on in, BU I think it can be cut off and still work

Thanks Randy

Sounds good Randy, PM me the total and payment info i'll paypal ya!
Thank
Glen

crig39 · 09-02-2011, 12:34 PM

from the pics it looks like this truck has a PTO and maybe a dump bed, if so how much for the intire PTO unit including levers and hyd. pump, and cylinder. Carl

cucvzuz · 09-02-2011, 12:41 PM

Will you be taking out the front springs at some point?

camrycurt · 09-02-2011, 01:10 PM

Quote:

Originally Posted by teeitup

camrycurt, sorry no antenna

Thanks Randy

OK, thanks for checking. I'll take the double-bend shifter, boot, and ring for $40 shipped.

PM me your payment info and I'll get that taken care of.

Thanks!

teeitup · 09-02-2011, 04:22 PM

Olebeater, Roland, sorry it sold with air cleaner

No Moa, Glen, the rear spring plates look good just some tar on them, I'll get pics

Crig39, Carl, sorry I cut handles to get cab off and there was nothing underneath

cucvzuz, sorry hauled frame to scrap today

camrycurt, I'll pm you info

Thanks Randy

no moa · 09-02-2011, 05:11 PM

That would be great Randy, anything is better than what I have. Also when u get the bed off, I'll show u what crossmember I need, see If yours is anygood compared to mine.
Posted via Mobile Device

teeitup · 09-02-2011, 06:59 PM

Glen, I'll get some pics up later tonight, headed to my Mom's birthday party now. Sorry the frame is gone, sold it today. Thanks Randy

no moa · 09-02-2011, 07:12 PM

Did u pull the rear spring perches before you sold it for scrap?
I need the ones that are riveted to the frame. Not sure if I was specific or not. I'll find the pics of mine.
Happy bday to your mom!
Thanks
Glen
Posted via Mobile Device

*454stepside* · 09-02-2011, 07:16 PM

payment sent thanks

70BLAZERX2 · 09-02-2011, 08:11 PM

randy..look under it and see if it has the aux brownie aux trans overdrive unit...Thats a good rare find if it does..

it will be like a divorced transfer case..mini driveshaft...post pics of it please..

teeitup · 09-03-2011, 09:05 AM

no moa, I cut off U bolt plates nothing else sorry

454stepside, I'll mail it out Tues, Thanks

70blazerx2, sorry none of that was under there, just the shifters

Thanks Randy

teeitup · 09-03-2011, 09:11 AM

more pics

teeitup · 09-03-2011, 09:12 AM

5444444444

teeitup · 09-03-2011, 09:13 AM

5999999999

teeitup · 09-03-2011, 09:14 AM

644444

no moa · 09-03-2011, 09:48 AM

Quote:

Originally Posted by teeitup

no moa, I cut off U bolt plates nothing else sorry

Thanks Randy

No problam Randy. Did you get my PM on some other parts i'm looking for? Also shipping on the aircleaner assm? I'm ready to paypal for the brake set up and the aircleaner when you are.

Let me know
Thanks
Glen

68chevyboy · 09-03-2011, 11:10 AM

Did you ever figure out a good time to pick up the cowl, and just to clarify we are talking about the piece between the windshield and hood. Thanks Brad.

teeitup · 09-03-2011, 12:01 PM

Glen, sorry been out mowing yard this morning, I'll get quote in awhile. Sorry none of that BB stuff right now.

Brad, Looks like Wed evening or Fri next week is the only evening we have open. Yes the cowl delete piece.

Thanks Randy

no moa · 09-03-2011, 12:04 PM

I have to mow mine this afternoon, i really should just pave it all! lol Thanks Randy.

68chevyboy · 09-03-2011, 01:01 PM

OK Wednesday evening will work best for me, let me what time works for you. Thanks Brad.

no moa · 09-03-2011, 02:10 PM

Payment sent Randy. Thank you!!!

bracingurl · 09-05-2011, 10:33 PM

Hi Randy,
We are looking for a decent cab with A/C, is this the only cab you have currently? Is the grill sold out of this truck, if not how much? If it is sold do you have any other same style of grills? Thanks Pam.

Beat68CST · 09-05-2011, 11:07 PM

Does it have a H072?

If so, what gear?

09-02-2011, 06:43 AM	#26
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 chevy 1 ton now no moa, Glen, it has hose, its cracked on in, BU I think it can be cut off and still work 454stepside, delete is yours Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-02-2011, 07:46 AM	#27
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: parting a 69 chevy 1 ton now Is the carb spacer on this truck spoken for?

09-02-2011, 12:34 PM	#29
crig39 Registered User Join Date: Aug 2010 Location: morristown, tn Posts: 53	Re: parting a 69 chevy 1 ton now from the pics it looks like this truck has a PTO and maybe a dump bed, if so how much for the intire PTO unit including levers and hyd. pump, and cylinder. Carl

09-02-2011, 12:41 PM	#30
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: parting a 69 chevy 1 ton now Will you be taking out the front springs at some point?

09-02-2011, 04:22 PM	#32
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 chevy 1 ton now Olebeater, Roland, sorry it sold with air cleaner No Moa, Glen, the rear spring plates look good just some tar on them, I'll get pics Crig39, Carl, sorry I cut handles to get cab off and there was nothing underneath cucvzuz, sorry hauled frame to scrap today camrycurt, I'll pm you info Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-02-2011, 05:11 PM	#33
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: parting a 69 chevy 1 ton now That would be great Randy, anything is better than what I have. Also when u get the bed off, I'll show u what crossmember I need, see If yours is anygood compared to mine. Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

09-02-2011, 06:59 PM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 chevy 1 ton now Glen, I'll get some pics up later tonight, headed to my Mom's birthday party now. Sorry the frame is gone, sold it today. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-02-2011, 07:12 PM	#35
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: parting a 69 chevy 1 ton now Did u pull the rear spring perches before you sold it for scrap? I need the ones that are riveted to the frame. Not sure if I was specific or not. I'll find the pics of mine. Happy bday to your mom! Thanks Glen Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

09-02-2011, 07:16 PM	#36
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: parting a 69 chevy 1 ton now payment sent thanks

09-02-2011, 08:11 PM	#37
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: parting a 69 chevy 1 ton now randy..look under it and see if it has the aux brownie aux trans overdrive unit...Thats a good rare find if it does.. it will be like a divorced transfer case..mini driveshaft...post pics of it please..

09-03-2011, 09:05 AM	#38
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 chevy 1 ton now no moa, I cut off U bolt plates nothing else sorry 454stepside, I'll mail it out Tues, Thanks 70blazerx2, sorry none of that was under there, just the shifters Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 09:11 AM	#39
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 chevy 1 ton now more pics Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 09:12 AM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 chevy 1 ton now 5444444444 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 09:13 AM	#41
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 chevy 1 ton now 5999999999 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 09:14 AM	#42
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 chevy 1 ton now 644444 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

09-03-2011, 11:10 AM	#44
68chevyboy Registered User Join Date: Dec 2008 Location: Aurora Missouri Posts: 57	Re: parting a 69 chevy 1 ton now Did you ever figure out a good time to pick up the cowl, and just to clarify we are talking about the piece between the windshield and hood. Thanks Brad.

09-03-2011, 12:01 PM	#45
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 69 chevy 1 ton now Glen, sorry been out mowing yard this morning, I'll get quote in awhile. Sorry none of that BB stuff right now. Brad, Looks like Wed evening or Fri next week is the only evening we have open. Yes the cowl delete piece. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-03-2011, 12:04 PM	#46
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: parting a 69 chevy 1 ton now I have to mow mine this afternoon, i really should just pave it all! lol Thanks Randy. __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

09-03-2011, 01:01 PM	#47
68chevyboy Registered User Join Date: Dec 2008 Location: Aurora Missouri Posts: 57	Re: parting a 69 chevy 1 ton now OK Wednesday evening will work best for me, let me what time works for you. Thanks Brad.

09-03-2011, 02:10 PM	#48
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: parting a 69 chevy 1 ton now Payment sent Randy. Thank you!!! __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

09-05-2011, 10:33 PM	#49
bracingurl Registered User Join Date: Apr 2010 Location: Baldwin City, KS Posts: 4	Re: parting a 69 chevy 1 ton now Hi Randy, We are looking for a decent cab with A/C, is this the only cab you have currently? Is the grill sold out of this truck, if not how much? If it is sold do you have any other same style of grills? Thanks Pam.

09-05-2011, 11:07 PM	#50
Beat68CST Registered User Join Date: Oct 2010 Location: Buckeye Arizona Posts: 470	Re: parting a 69 chevy 1 ton now Does it have a H072? If so, what gear?

Register or Log In To remove these advertisements.