'88-'98: What Size Tire and Wheel are You Running?

[ChevLoRay]

Went for the Wheel Vintiques 66-series Vette-style 16x7's. Have Yokohama Geolander HT-S tires in a 245-70 size. If I ever replace the fronts, I'm gonna go back and get a shorter tire and a little rubber rake. Fronts are a touch too tall.

[Ricky78045]

I'm running my painted stock 15x6 steels with Cooper 235/75/r15.


Posted via Mobile Device
Posted via Mobile Device

[54 jimmy]

running 265 75r16 on 2002 chevy stock wheels. truck has 2 added leafs and a 2in block in the back. front bars were cranked a little. i have plenty of room to run 285 75r16's which i will put on when these tires wear out. the second pic is when i had older 15 inch wheels 10 wide with 33x9.50 r15. but with the back spacing the rubbed the inner fenders too bad.

[75ChevyGuy]

Actually the worst side of my truck. Will take a better picture tonight. 275/60R15 BFG Radial T/A's on a 1970's ralley 15x8. Powder coated black with silver center caps.

[Dub_X]

Thank you guys for reviving this thread lol. I was hoping when I started the thread last year it would run continuously. I guess it worked for a while. Glad to see it revived with new posts. Trucks look good.

[G&R's57GMC]

Started life with 235/75Rx15 went to 275/60Rx17

[ChevLoRay]

Just replaced my police caps, with a nice set of used Monte Carlo center caps. It actually looks a bit more masculine than the other ones did, although it is hard to see in this pic. (Note to self: Take better pix.)

[jb1016]

275/60/15 BFGs on Sport wheels, rescued from a field full of demo derby cars. NOS caps from Ebay.



Sorry for the crappy pic.

[tripleD]

33x12.50x15

[jared.landis]

What is the widest tire you guys have found to fit on a 20x10 rim in the rear with a 4/6 drop? Without cutting anything.

[tripleD]

my wifes tahoe! 33x12.50x15 BFG

[project 67 sub]

295/50r15 on some 15x10 bassett racing wheels out back, and some 225/60r15's up front on some stock 15x7's (gonna get some new 15x10's and matching 15x8's like the 10's on the back for the front)






the bassett racing wheels im running. oh! dont mind the blown out tire, it was due to seperating of an old tire which all of them were replaced. both back ones were horribly seperated lol

[bpeters5814]

285/75/16 Cooper STTs on 16"x6.5" newer style OEM wheels.

[TecRsq]

295/50/15's on 8" Truck Rally's

[Kurt3]

Nice truck TecRsq, in your signature it says 15x10's. Is that correct or are they 8's? And did you get them online somewhere or off another truck?

[red02chevy]

15x6 with 235/75R15




15x6 with 235/75R15




15x6 with 225/75R15 & 15x7 with 235/75R15

[StepinNJ]

275-45-20's on stock height 90 2wd.

[TecRsq]

Originally Posted by Kurt3

Nice truck TecRsq, in your signature it says 15x10's. Is that correct or are they 8's? And did you get them online somewhere or off another truck?

My bad bud, I think they are 8's but not positive on that at all. When I purchased the truck it was on wheels much bigger than my taste runs, he stated he had some wide rally wheels that he would paint argent silver for me and include them in the deal, I was really happy to have the Rally's so I just threw em on.

To me the rally's just look right on the trucks and you can go so many different ways with the looks and set up.

I know the 295's look like they belong there and arent out of porportion at all IMO.

[98GMCSierraGuy]

I was thinking of putting some 15x10 or 16x10 on my truck. I got the stock ones for now.

[wwj75c30]

im runnin 31x12.50x16 boggers with 16x10 ion forged wheels on my 88 k1500 it has a 3" body lift but thats how i got it. im gonna buy 33x12.50s next

[special-K]

255/85-16

[Blue97]

315/70/17

33/12.50/15 i miss them!!

285/70/17


I want to go back to 33's and 15's but not sure they will fit now............

[MaritimeDragRacing]

1970s Rally Wheels - 15X7 front with 235/75 Goodyear Wranglers, 15X8 rear with 10.5X31 Canadian Tire A/Ts

[Palf70Step]

31x10.50/15 on 15x8 73-87 style truck ralleys and stock 96 center caps

[sbc383rulz]

cant seem to find a picture of it on this computer but i have a 96 k1500 with a torsion bar crank and 35s, the only time it rubbed with the mickey thompson wheels i had was when i jumped it and with stock wheels it rubbes the frame at full turn. i trimmed valence and bumper a little and cut end bent the back of the front fender a bit. the rear with the mickey thompsons rubbed the outside of the tire on the lip of the fender at full stuff.