GA 1971 cheyenne big block truck parting out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**chewychevy67** · 01-29-2012, 11:10 AM

can you get pic's of the dual exhaust hangers? i need some of them. Rod.

bigbadchev72 · 01-29-2012, 12:35 PM

seat belts?

**chewychevy67** · 01-29-2012, 12:50 PM

the bb hangers i need i think may be 72 only but not sure?

DD1 · 01-29-2012, 01:02 PM

I am considering getting an A/C cab from someone to replace my non-A/C cab. However, I would still need to get the center and two outer vents, the control unit and the cables that make it work. How much for all of this stuff assuming it has not been sold?

Also, how much for the outer heater box? What kind of condition is everything in?

Shipping to 10901. If they are all available and the price is right, I will take them.

**jocko** · 01-29-2012, 01:21 PM

HeeHaw, I'm interested in the glovebox door. Pending price and shipping (to 93555) - I'd like to buy it. Thanks!

(note, pls disregard original post, I edited it shortly after I posted - for some reason I had Cheyenne Super in the back of my mind - I re-read, and so I understand it has no woodgrain - I'm interested in it just like it is with purdy yeller paint... Would like to see a few close up pics if not too much trouble)

**heehawracing** · 01-29-2012, 09:35 PM

i looked for the hangers but it doesnt have any

glove box door 35.00 shipped i can post pics tomorrow

i have two nice outer a/c vents one center vent all the cables and the outside box i will post pics tomorrow 150.00 shipped for all that
i dont have any ac controles

**jocko** · 01-29-2012, 09:54 PM

thanks heehaw, I'll look for the pics tomorrow

**heehawracing** · 01-30-2012, 07:33 PM

pics of glove box

chachi127 · 01-30-2012, 08:55 PM

Rear cargo light? Shipped to 53403 Thank you

72GMCK-2500 · 01-30-2012, 09:02 PM

Hey hows the carpet/floor mat? Interested! Thanks, Andrew.

**jocko** · 01-30-2012, 09:51 PM

thanks heehaw, I'll take the glovebox fro 35 shipped. I'll pm you for paypal info.

chachi127 · 01-31-2012, 02:13 AM

Found a cargo light thanks anyhow. Good luck with your sales.

**heehawracing** · 01-31-2012, 09:02 AM

no carpet
no cargo light
thanks

bigrigpardo · 01-31-2012, 11:27 PM

how bad is the cab on the truck?

lowellhogfan · 03-10-2012, 10:27 AM

how are the trailing arms
and is this automatic high hump cover

**Dave** · 03-10-2012, 10:37 AM

Looking for a set of 71 style exhaust hangers, lmk, if you have these.
Thanks Dave..

**Dave** · 03-11-2012, 09:10 PM

Also, looking for the '71 engine side mounts with fastners for a BB. LMK,
thanks Dave..

**Dave** · 03-18-2012, 10:00 PM

Do you still have the frame brkt for the auto shift linkage for a BB. LMK, if you do and price shipped to CONUS. Thanks Dave..

skrenly · 03-18-2012, 10:02 PM

How is the high hump?
Thanks, steve

ekgguy · 03-18-2012, 10:10 PM

Do you have the frame engine mounts?

**heehawracing** · 03-18-2012, 11:04 PM

there is nothing left on this truck
but i have some good trailings arms

lowellhogfan · 03-19-2012, 08:55 AM

would you send pics of trailing arms

01-29-2012, 11:10 AM	#26
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,551	Re: 1971 cheyenne big block truck parting out can you get pic's of the dual exhaust hangers? i need some of them. Rod.

01-29-2012, 12:35 PM	#27
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: 1971 cheyenne big block truck parting out seat belts? __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

01-29-2012, 12:50 PM	#28
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,551	Re: 1971 cheyenne big block truck parting out the bb hangers i need i think may be 72 only but not sure?

01-29-2012, 01:02 PM	#29
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: 1971 cheyenne big block truck parting out I am considering getting an A/C cab from someone to replace my non-A/C cab. However, I would still need to get the center and two outer vents, the control unit and the cables that make it work. How much for all of this stuff assuming it has not been sold? Also, how much for the outer heater box? What kind of condition is everything in? Shipping to 10901. If they are all available and the price is right, I will take them.

01-29-2012, 01:21 PM	#30
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: 1971 cheyenne big block truck parting out HeeHaw, I'm interested in the glovebox door. Pending price and shipping (to 93555) - I'd like to buy it. Thanks! (note, pls disregard original post, I edited it shortly after I posted - for some reason I had Cheyenne Super in the back of my mind - I re-read, and so I understand it has no woodgrain - I'm interested in it just like it is with purdy yeller paint... Would like to see a few close up pics if not too much trouble)

01-29-2012, 09:35 PM	#31
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1971 cheyenne big block truck parting out i looked for the hangers but it doesnt have any glove box door 35.00 shipped i can post pics tomorrow i have two nice outer a/c vents one center vent all the cables and the outside box i will post pics tomorrow 150.00 shipped for all that i dont have any ac controles

01-29-2012, 09:54 PM	#32
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: 1971 cheyenne big block truck parting out thanks heehaw, I'll look for the pics tomorrow

01-30-2012, 07:33 PM	#33
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1971 cheyenne big block truck parting out pics of glove box Attached Images

01-30-2012, 08:55 PM	#34
chachi127 Registered User Join Date: Jan 2006 Location: Racine, WI Posts: 73	Re: 1971 cheyenne big block truck parting out Rear cargo light? Shipped to 53403 Thank you __________________ 1972 GMC 'Project Red' Long Road Ahead

01-30-2012, 09:02 PM	#35
72GMCK-2500 Registered User Join Date: Feb 2011 Location: West Chester Pa. Posts: 195	Re: 1971 cheyenne big block truck parting out Hey hows the carpet/floor mat? Interested! Thanks, Andrew. __________________ 1947 Chev 3600, 454,th350,9"ford tubbed (Pop's ride) 1965 GMC 1000 305E V6, Powerglide. GONE 1972 GMC K-2500 350, 4 speed, 229,000 miles 1988 Chevrolet Caprice 9C1 Ex cop car, 350, 700r4. 1997 Ford F-350 4x4 XLT (The Hauler) 7.3 diesel. RUST NEVER SLEEPS

01-30-2012, 09:51 PM	#36
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: 1971 cheyenne big block truck parting out thanks heehaw, I'll take the glovebox fro 35 shipped. I'll pm you for paypal info. Last edited by jocko; 01-31-2012 at 11:30 AM.

01-31-2012, 02:13 AM	#37
chachi127 Registered User Join Date: Jan 2006 Location: Racine, WI Posts: 73	Re: 1971 cheyenne big block truck parting out Found a cargo light thanks anyhow. Good luck with your sales. __________________ 1972 GMC 'Project Red' Long Road Ahead

01-31-2012, 09:02 AM	#38
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1971 cheyenne big block truck parting out no carpet no cargo light thanks

01-31-2012, 11:27 PM	#39
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: 1971 cheyenne big block truck parting out how bad is the cab on the truck?

03-10-2012, 10:27 AM	#40
lowellhogfan Registered User Join Date: Mar 2012 Location: Lowell, Arkansas Posts: 11	Re: 1971 cheyenne big block truck parting out how are the trailing arms and is this automatic high hump cover



Register or Log In To remove these advertisements.

03-10-2012, 10:37 AM	#41
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,397	Re: 1971 cheyenne big block truck parting out Looking for a set of 71 style exhaust hangers, lmk, if you have these. Thanks Dave..

03-11-2012, 09:10 PM	#42
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,397	Re: 1971 cheyenne big block truck parting out Also, looking for the '71 engine side mounts with fastners for a BB. LMK, thanks Dave..

03-18-2012, 10:00 PM	#43
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,397	Re: 1971 cheyenne big block truck parting out Do you still have the frame brkt for the auto shift linkage for a BB. LMK, if you do and price shipped to CONUS. Thanks Dave..

03-18-2012, 10:02 PM	#44
skrenly Registered User Join Date: Feb 2008 Location: Coronado, CA Posts: 1,085	Re: 1971 cheyenne big block truck parting out How is the high hump? Thanks, steve

03-18-2012, 10:10 PM	#45
ekgguy Registered User Join Date: Jan 2012 Location: Humble, Texas Posts: 414	Re: 1971 cheyenne big block truck parting out Do you have the frame engine mounts? __________________ Matt Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=672655 "Father thank you for the gathering of friends, Father we give thanks for all the choices we've made because that's what makes us who we are, let us forever cherish the loved ones we've lost along the way and most of all *THANK YOU FOR FAST CARS!"*

03-18-2012, 11:04 PM	#46
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1971 cheyenne big block truck parting out there is nothing left on this truck but i have some good trailings arms

03-19-2012, 08:55 AM	#47
lowellhogfan Registered User Join Date: Mar 2012 Location: Lowell, Arkansas Posts: 11	Re: 1971 cheyenne big block truck parting out would you send pics of trailing arms

Register or Log In To remove these advertisements.