CA The cleanest long bed i've ever seen - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ortegamotor · 02-26-2012, 11:58 AM

Quote:

Originally Posted by GobbleStalker

I am interested but need it shipped. Heavy metal can you ship it to NY state. 13601 area?

Let me know?

Kevin

Hey Kevin, you will not be disappointed .
Posted via Mobile Device

MARIOS68PANEL · 02-26-2012, 12:39 PM

Quote:

Originally Posted by ortegamotor

Hey Mario, yeah this bed is from Roseville . That truck would have been one cool truck if they would have finished it. The bumper is for sale too $100.
Posted via Mobile Device

I cant believe he didnt want to finish that one. It was so close .
I know how it goes tho.
I need the bumper but will have to work on the funds. I will get back to you of you still have it.

SCOOBYDOOBYDOO · 02-26-2012, 02:32 PM

how much for the tailgate and could you get me some pics of it

ortegamotor · 02-26-2012, 02:43 PM

When I get home I post some pictures , I have 5 tailgates for sale.
Posted via Mobile Device

TRAV2282 · 02-26-2012, 07:46 PM

Hey bro im interested in those other tail gates. Could you take some picks thanks.

GobbleStalker · 02-26-2012, 10:07 PM

Thanks Heavy let me know. I might want the gate if it is good also.

Kevin

HeavyMetalChevy · 02-26-2012, 10:44 PM

Quote:

Originally Posted by GobbleStalker

Thanks Heavy let me know. I might want the gate if it is good also.

Kevin

It is working again finally!!! lol Working out kinks in new system. Looks to be around $519.80... That is a little money for a huge cross country trip.

-From Auburn, CA 95602 to Watertown, NY 13601 over 2700 miles!!
-Put at class 150 freight shipment. I will double check to make sure it is not 200
-600 lb weight. 500 for bed and 100 for two pallets joined together.
- Best way would be to stand bed up right and secure to double pallet with straps.
-If possible trim two skids down to just big enough to set bed on it and secure them together with a solid piece of plywood on top. The smaller you can get the base dimensions of pallet down.. the cheaper it will be.

Let me know. I ship a stepside from Nevada this way.

GobbleStalker · 02-27-2012, 09:24 AM

Quote:

Originally Posted by HeavyMetalChevy

It is working again finally!!! lol Working out kinks in new system. Looks to be around $519.80... That is a little money for a huge cross country trip.

-From Auburn, CA 95602 to Watertown, NY 13601 over 2700 miles!!
-Put at class 150 freight shipment. I will double check to make sure it is not 200
-600 lb weight. 500 for bed and 100 for two pallets joined together.
- Best way would be to stand bed up right and secure to double pallet with straps.
-If possible trim two skids down to just big enough to set bed on it and secure them together with a solid piece of plywood on top. The smaller you can get the base dimensions of pallet down.. the cheaper it will be.

Let me know. I ship a stepside from Nevada this way.

Would I need a fork truck to unload this?

Thanks
Kevin

ortegamotor · 02-27-2012, 09:33 AM

Quote:

Originally Posted by GobbleStalker

Would I need a fork truck to unload this?

Thanks
Kevin

no , when its delivered they put it right on the ground. and you un-band it and two guys can pick it up. Tony

HeavyMetalChevy · 02-27-2012, 09:40 AM

Quote:

Originally Posted by ortegamotor

no , when its delivered they put it right on the ground. and you un-band it and two guys can pick it up. Tony

A couple pretty strong guys!!! And just to clarify, it will need a fork truck unless it is delivered to a freight terminal which already has them or a loading dock. I have move a few beds before with two guys but it is not a simple task. Anything can be offloaded by hand I suppose.

ortegamotor · 02-27-2012, 10:14 AM

here is a picture of one i shipped in the past. a big truck showed up they pallet jacked to a lift gate and then they were gone.

ortegamotor · 02-27-2012, 10:21 AM

here are some of the gates i have for sale. there're all driver quality with no rust, and some small dents on the top ridge. this one is $250.00 plus shipping

ortegamotor · 02-27-2012, 10:25 AM

here is the second one. this one is nice $270.00 plus shipping. no rust , in solid working condition.

ortegamotor · 02-27-2012, 10:31 AM

here is the 3rd one. $$250.00 plus shipping. solid driver quality , in perfect working condition.

Delta9 · 02-27-2012, 11:13 AM

hey Duane u get any picks of mine all wrapped up like that, i think that would b cool to see. u kinda got me excited when i seen that 1 (thinkin it was mine)

ortegamotor · 02-27-2012, 06:43 PM

Ttt
Posted via Mobile Device

GobbleStalker · 02-27-2012, 10:16 PM

Do you have any pics of the box before paint?

ortegamotor · 02-27-2012, 11:45 PM

Quote:

Originally Posted by GobbleStalker

Do you have any pics of the box before paint?

sorry no pictures before the paint. this came from some else's project. I know pictures just don't do it justice . thats how nice this bed is. Thanks for looking.

HeavyMetalChevy · 02-27-2012, 11:55 PM

Quote:

Originally Posted by ortegamotor

sorry no pictures before the paint. this came from some else's project. I know pictures just don't do it justice . thats how nice this bed is. Thanks for looking.

I have seen crazy stuff... but I can tell from the quality of paint that I HIGHLY DOUBT that someone would spend that much money on paint to have some shotty bondo work bubble it up. Just my opinion. I would buy this bed if I was ready for my other project. 100%

ortegamotor · 02-28-2012, 12:02 AM

Quote:

Originally Posted by HeavyMetalChevy

I have seen crazy stuff... but I can tell from the quality of paint that I HIGHLY DOUBT that someone would spend that much money on paint to have some shotty bondo work bubble it up. Just my opinion. I would buy this bed if I was ready for my other project. 100%

I agree. who ever buys this bed will be calling me back to tell me that it was everything i said it was and more. That how i roll. So lets do this guys don't pass up a great opportunity to have the nicest bed in town. Thanks for looking.

HeavyMetalChevy · 02-28-2012, 12:21 AM

I like the way you roll buddy!

HeavyMetalChevy · 02-28-2012, 12:24 AM

Quote:

Originally Posted by Delta9

hey Duane u get any picks of mine all wrapped up like that, i think that would b cool to see. u kinda got me excited when i seen that 1 (thinkin it was mine)

I am sure Linelock snapped one. I am clearing out room for it now along with the clip. I should start blasting your grille tomorrow. Your bed is ready to ship I just have SOOOOOOO much crap to move and clean up around here it is not even funny!!! I hope you are not discouraged. Just have "ton-age" around here and in the process of converting 3 storage units into one.. lol

Delta9 · 02-28-2012, 12:41 AM

Quote:

Originally Posted by HeavyMetalChevy

I am sure Linelock snapped one. I am clearing out room for it now along with the clip. I should start blasting your grille tomorrow. Your bed is ready to ship I just have SOOOOOOO much crap to move and clean up around here it is not even funny!!! I hope you are not discouraged. Just have "ton-age" around here and in the process of converting 3 storage units into one.. lol

not at all, ill ask LineLock bout some shipping pics. im not too worried since im not even in the states yet to get it but it is nice to know things are moving
Thanks Duane

ortegamotor · 02-28-2012, 11:13 AM

this bed comes with wheel tubs and cross beams . all in great condition.

ortegamotor · 02-29-2012, 01:07 AM

Ttt
Posted via Mobile Device

02-26-2012, 02:32 PM	#28
SCOOBYDOOBYDOO Registered User Join Date: Feb 2010 Location: DANA POINT CA Posts: 256	Re: The cleanest long bed i've ever seen how much for the tailgate and could you get me some pics of it __________________ ScoobyDoobyDoo

02-26-2012, 02:43 PM	#29
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: The cleanest long bed i've ever seen When I get home I post some pictures , I have 5 tailgates for sale. Posted via Mobile Device

02-26-2012, 07:46 PM	#30
TRAV2282 Registered User Join Date: Jul 2010 Location: reno nevada Posts: 13	Re: The cleanest long bed i've ever seen Hey bro im interested in those other tail gates. Could you take some picks thanks.

02-26-2012, 10:07 PM	#31
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: The cleanest long bed i've ever seen Thanks Heavy let me know. I might want the gate if it is good also. Kevin __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

02-27-2012, 10:14 AM	#36
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: The cleanest long bed i've ever seen here is a picture of one i shipped in the past. a big truck showed up they pallet jacked to a lift gate and then they were gone. Attached Images

02-27-2012, 10:21 AM	#37
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: The cleanest long bed i've ever seen here are some of the gates i have for sale. there're all driver quality with no rust, and some small dents on the top ridge. this one is $250.00 plus shipping Attached Images Last edited by ortegamotor; 02-27-2012 at 10:38 AM. Reason: mis marked

02-27-2012, 10:25 AM	#38
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: The cleanest long bed i've ever seen here is the second one. this one is nice $270.00 plus shipping. no rust , in solid working condition. Attached Images

02-27-2012, 10:31 AM	#39
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: The cleanest long bed i've ever seen here is the 3rd one. $$250.00 plus shipping. solid driver quality , in perfect working condition. Attached Images

02-27-2012, 11:13 AM	#40
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: The cleanest long bed i've ever seen hey Duane u get any picks of mine all wrapped up like that, i think that would b cool to see. u kinda got me excited when i seen that 1 (thinkin it was mine)

02-27-2012, 06:43 PM	#41
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: The cleanest long bed i've ever seen Ttt Posted via Mobile Device

02-27-2012, 10:16 PM	#42
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: The cleanest long bed i've ever seen Do you have any pics of the box before paint? __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

02-28-2012, 12:21 AM	#46
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: The cleanest long bed i've ever seen I like the way you roll buddy! __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-28-2012, 11:13 AM	#49
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: The cleanest long bed i've ever seen this bed comes with wheel tubs and cross beams . all in great condition.

02-29-2012, 01:07 AM	#50
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: The cleanest long bed i've ever seen Ttt Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.