AL GIANT 60-66 parts Stash Barn Find!!

[Hardrockz28]

Need a tail gate and all hardware for 66 fleet side
Posted via Mobile Device

[AngryPirate]

How much for the instrument cluster?

[rideblue00]

Looking for a 4 pc set of fleetside rear bumper brackets for my 66.

[stevenb]

How much for a short fleetside bed, what condition is it in?
Posted via Mobile Device

[LostMy65]

How much for something, I mean anything....?
Posted via Mobile Device

[GMCNUT]

Originally Posted by MisterC

Prices on 64-66 factory clock.jpg 114 and the stainless trim on fenders and doors in picture above.

Sorry for the slow replies to everybody - getting caught up now

The clock is completely unknown to me as far as when it last functioned or whether it would work but it looks super cool anyway - just make an offer keeping its rarity in mind

The side trim is very nice and is being sold as a 100% complete ready to be polished set - appears to be pretty close to ding free if not.....175.00 for the complete set and that includes the short fleet box pieces.

[GMCNUT]

Originally Posted by ctandc

Both front fenders for a '65.

We have a variety of front fenders for your 65 - some in nicer shape than others. We have one perfect bondo and rot free dent free Drivers side fender for 200.00 already sanded and etch primed and ready for paint, but all the rest are originals that are unrestored and have various imperfections - a pair of normal unrestored but not rotted front fenders will be around 150 each or 300 for the set. Cheaper if you want fenders you can patch or that have a small amount of bondo etc....we can fit any budget - trust me.

[GMCNUT]

Originally Posted by LostMy65

Is there a decent floor mat or two?
Posted via Mobile Device

oddly I did not see a single one with even the remnants of a floor mat - all removed by the previous owner - sorry

[GMCNUT]

Originally Posted by kenmel

complete 3 on the tree linkages from the column to the transmission? not the clutch linkages lol.

Well, Kenmel I am sorry - the one we picked up today was supposed to be a manual but it turned out to have a T350 in it - sorry

I did find you a set in the junkyard but I did not pull them thinking we were about to have a set, so I will see if they are still there this week when I check back

[GMCNUT]

Originally Posted by LostMy65

It appears there are some custom knobs.
Am I correct?
Posted via Mobile Device

A couple of these trucks have the custom knobs - I have some loose ones too....which ones do you need?

[GMCNUT]

Originally Posted by LT1 Burb

That clock looks like a 56 or 57 car clock, how much for a chrome sport bumper like the one on that blue stepside with brackets.

The chrome rear bumper on the Green 63 GMC stepside is 100.00 with brackets. Can be shipped via FedEx or by Greyhound. Hard to say what that would cost without removing it so if you are committed to the 100.00 price I have another one off another truck I can use to weigh and see what shipping will be. Send your zip - Thank you

[GMCNUT]

Originally Posted by sargentdan

need a good drivers fender, matched set of mirrors dont care what syle just a matched set and a full harness from under the hood to the tail for a 62 swb step price shiped to 72023 thanks

OK - I have already told several members the same thing on the fenders so its first come first serve on who responds saying they want this one or that one. We have a perfect driver side fender already sanded and Etch primed - no bondo and no dents - perfect original GM steel ready for paint 200.00

If 200.00 is too nice or expensive, we have a Drivers side front fender in every conceivable condition for every price point based on what you want to spend vs what you are willing to repair. We currently have some nicer unrestored solid fenders for like 150.00 and some with more pinholes or paint bubbles in the lower section for say 75.00 to 100.00 etc....less if you want a straight fender you can fix. Just let me know what condition you are most interested in and I can send pictures

On the harness, I assume you mean the taillight harness that runs from the firewall to the rear of the frame - this is a bonded set of pink purple and black wires on 62. The taillights are a separate plug in harness - so do you just need the main harness to the rear of the frame?

[GMCNUT]

Originally Posted by sargentdan

need a good drivers fender, matched set of mirrors dont care what syle just a matched set and a full harness from under the hood to the tail for a 62 swb step price shiped to 72023 thanks

Sorry - forgot the mirrors - we got a set of chrome 5" round headed mirrors and chrome arms off a 60-66 that have some surface rust on the screws on the mirror head, but are either stainless or chrome - 40.00 on those - perfect mirrors

[GMCNUT]

Originally Posted by hopped up

rear sport bumper!! prefer painted
Posted via Mobile Device

I think the only rear sport bumper we got was the chrome 63-66 one on the 63 GMC green stepside you see above. Another member asked about it first but if they pass it will still be for sale. Got stepside bumpers but not Fleets - sorry

[GMCNUT]

Originally Posted by LostMy65

Also, I need a 62 and a 64-66 fan shroud.

The 62 looks like a 55 gallon drum. and the 64-66 I think is fiberglass and mounts to side strips

Sorry - all these trucks had the engines removed so someone discarded the shrouds unfortuately

[GMCNUT]

Originally Posted by darkhorse970

I'm interested in one of the automatic columns you've got. Can you email or post pics of the best 2?

The two we have are pictured in the pictures in the link in the original ad up top - both appear to be as nice as the other, but if I could only buy one I would buy the one out of the Blue 65 short fleet you see in the pics. It has a grant style steering wheel on it, but we will remove that before we pull the column. 175.00 for either auto column - no wheel and no center steel shaft - the shaft is the same in your existing column and only causes a ton of un-neccessary weight and shipping cost but if you need it, and don't mind paying the extra shipping we will send it anyway - just let me know

NOTE DARKHORSE 970 was 1st member to inquire on auto columns

[GMCNUT]

Originally Posted by scottofksu

A nice aluminum grill would be on my Christmas list... )

Well, you see the only one we got in the pictures of all the grilles in the link above - so is that grill what you need? that grille is only the body - no buckets or headlight bezels - sorry that is the way it came. 100.00 sound fair?

[LostMy65]

Originally Posted by GMCNUT

A couple of these trucks have the custom knobs - I have some loose ones too....which ones do you need?

At least the Lights, Wipers, and the other one of the three that I can't remember what it does right at this moment.

[GMCNUT]

Originally Posted by rbuckin111

What would you be asking for the GMC grill in pic 058 and 062? Shipped to 85205? Thanks!

185.00 shipped - includes but undented chrome headlight bezels and all GMC letters. I gave this grill a bath yesterday and took some new closer pictures - it is nicer than it looked in the first shots. Let me know if you want to see them before deciding - want to make sure you will be pleased - it does need replating but would look great on a driver as is.

[GMCNUT]

Originally Posted by duallyjams

Price on power brake booster set up.

Apologies for the high price, but I sold two of these for 400.00 each on Ebay last year after I cleaned them up and repainted them and made sure they worked and included a new master cyl and used pwr brake pedal pad. I intend to do the same to this one and put it on Ebay too, but if you are OK with the price I will still do all the cleanup and buy the new master cyl etc just like it would be for Ebay - normally when you buy an original booster, it does not work - when they do not work you have to send them off to be rebuilt. Rebuilding is 250.00 to 350.00 depending on what it needs so that is why the considerable expense for a working 100% complete unit. It also has 100% of its original and corrrect marked bolts and hardware. Think about it, and weigh your options and let me know.

[GMCNUT]

Originally Posted by Shooters_7

I can use an auto column, a 65 custom steering wheel (complete), the factory clock, factory radio..., SWB fleetside bed. Arab isn't too bad of a drive but would take the whole weekend for me. PM me and we can set something up.

Got 2 auto columns and both are 175.00 - another member has laid claim to one of them I think so that makes the other one yours to take or leave. We have two 65 custom steering wheels and one is pretty pitted and has a badly cracked steering wheel for 50.00 or we have a MUCH nicer one that looks great for 150.00 - can send pics of both. Another member has asked before you on the clock so until they come back saying they will or won't take it I cannot offer it to you yet but you are next in line
Factory radio I do not have a Chevy - only GMC for 64-66. I do know another guy who has a working 64-66 Chevy radio though and I can put you in contact with him. On the SWB fleet bed, I have one of those too - can send pics I just took yesterday. 450.00 on it. Comes with a nice fleet tailgate w/ no rot or serious dents. Bed has a plywood floor. Send your email address for pics

[GMCNUT]

Originally Posted by killerb68

dash with gauges and inner fenders for my 66 GMC

I will have to look and see if there are two of these, but I know there is at least 1 guage dash because I saw it today. can send pics - not a perfectly awesome cluster, but may just need a good cleaning - certainly complete and still installed as far as that goes - 50.00 + whatever shipping determined after its boxed and weighed. Inner fenders are 75.00 each for perfect dent free and rot free ones. We have several sets of these but not for long - you are the 3rd member to ask

[GMCNUT]

Originally Posted by 66 GMC 351E

Still looking for a good power steering reservoir. I saw a picture of one in your webshots album. Do you have a price for it?

Sorry - that is my hot spare pump - cannot afford to let go of it. Its my spare when mine goes bad or springs a leak. Will eventually find you one - I am still poking around to find that for you

[GMCNUT]

Originally Posted by 1965Project

How about a pair of door panels?

We should have a nice set of 64-66 door panels on one of these trucks - 20.00 each plus whatever it takes to get them to you. Need a zip to figure

[GMCNUT]

Originally Posted by 62 short step

Any radiator shrouds and metal side pieces for a 64-66?

We have a 6 cyl metal shroud and I think we have a set of factory V8 shroud brackets but no V8 shroud. The V8 shroud braces are 30.00 for the set. They are getting particularly hard to find anymore and I think out of 7 trucks we only got one set....shipping determined from your zip code after I box them, but shouldn't be much 10 to 15 bucks to get them shipped on Priority or approx 1/2 that for Parcel post