KS 72 chevy highlander with tilt getting parted - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Fattback · 04-13-2012, 06:45 PM

I'm in Tulsa wouldn't mind meeting you to pick it up. How much you wanting for the outer?

Thanks
Rob
Posted via Mobile Device

**DeadheadNM** · 04-13-2012, 07:19 PM

Hoping for medium olive defrost vents so will pass. Thanks for checking.

Bummer of the 4x4 difference but that's what I suspected. Keep me in mind if you get some......

Pete

Quote:

Originally Posted by teeitup

Pete, it has black defrost vents in it that are in good condition. Thanks Randy

72GMCK-2500 · 04-13-2012, 07:21 PM

Hey Randy hows the Floor mat? Thanks, Andrew.

teeitup · 04-13-2012, 07:26 PM

Rob, thats what I thought

Graham57A, Andrew, I need to see if I have one thats decent

Fattback, Rob, $100 for an outer

Pete, I will watch for you

Andrew, not sure yet, I will look tomorrow if not raining

Thanks Randy

**Graham57a** · 04-13-2012, 08:30 PM

Okay, no hurry. The second one pictured on page 1 looks pretty clean, kinda hard to tell tho. Show quality is not necessary, just something that is decent.

Fattback · 04-14-2012, 08:43 AM

Randy sounds good on the price. Next couple weekends I am swamped. I will pm you and we can make arrangements to meet later this month.

Thanks
Rob

teeitup · 04-14-2012, 10:35 AM

Andrew, I will look later today

Rob, sounds good. I know the 28th in the afternoon I'm busy but could meet in morning or that Sun. I've have a big swap meet in Lawrence Ks on the 4th and 5th, might be worth your time to meet me there either Fri afternoon or Sat morn, I'll have all the parts I have sat out there except real big stuff

Thanks Randy

**Cash3481** · 04-14-2012, 12:21 PM

Randy, I'm interested in the rear end... What gear ratio is it?
Also need a 68 sb engine harness if you have one.
Mike
Posted via Mobile Device

teeitup · 04-14-2012, 04:01 PM

MIke, I'll pull cover and see ratio. Sorry no good engine harnesses right now. Thanks Randy

teeitup · 04-14-2012, 08:37 PM

Grahams57A, here is the best one I have, it has one broken tab, see pic. I've seen guys glue these, $30 plus shipping

**Graham57a** · 04-14-2012, 09:29 PM

Quote:

Originally Posted by teeitup

Grahams57A, here is the best one I have, it has one broken tab, see pic. I've seen guys glue these, $30 plus shipping

Is that with the emblem? Also could you get a shipping quote to 28115 for me?

teeitup · 04-15-2012, 06:55 PM

cash3481, Mike, its a 3.08 open rear. Thanks let me know, Randy

larryd · 04-15-2012, 07:16 PM

I need this Blazer drivers side taillight area. Also I need two
good front inner fender wells. Thanks

teeitup · 04-15-2012, 09:17 PM

Larry I will look at this one, not sure if its good or been bondo'd already. Sorry no good inner fenders. Thanks Randy

teeitup · 04-16-2012, 07:52 AM

pics for Doublebe's

doubleb's69 · 04-16-2012, 10:34 AM

That was pretty quick Randy. How much shipped to 50313. Thanks.

spatz · 04-16-2012, 09:44 PM

Randy, Im looking for the aux spring bracket that the spring sets on by the rear axle and goes under the lower shock mount bracket. this is for a coil spring rear. I need both sides if you come across a pair. thanks

**Cash3481** · 04-16-2012, 09:56 PM

Quote:

Originally Posted by teeitup

cash3481, Mike, its a 3.08 open rear. Thanks let me know, Randy

I'll take it! It is a 5 lug coil spring correct?
I hear a road trip coming. Need anything from down here?
I have a trailer...
Mike
Posted via Mobile Device

teeitup · 04-16-2012, 10:58 PM

Bud, info sent

Terry, none right now but I will watch for you some

Mike, yes 5 lug coil spring, it is yours. David, is buying the front end, you guys might make a trip together

I need trucks to part out

Thanks Randy

**Cash3481** · 04-22-2012, 11:42 PM

Randy, here's a bump for you!
I'll figure out the trip w/ David or w/o him this week and get back with you.
I can shoot for the end of the week maybe and grab his stuff if he's too busy. I should have grabbed it today on the way to the race.
Mike
Posted via Mobile Device

teeitup · 04-23-2012, 07:37 AM

Mike, How was the race? I haven't been down there for a few years. I'm going to try to get the rearend pulled and front pulled Tues after work so it will be ready. Just let me know, Thanks Randy

Boyd B · 04-23-2012, 03:02 PM

How's the cab? how much for the cab w/ dash and a/c and heater boxes and controls?

RocketChevy56 · 04-23-2012, 06:13 PM

Interested in the wing windows and door glass, and perhaps the back glass all pending shipping/condition etc. No variations between 69 Chevy to 72s that I know of, but please let me know if otherwise. Thanks!!

Zip-78641
Posted via Mobile Device

teeitup · 04-23-2012, 08:29 PM

Boyd, cab is bad, I replied on other thread about Ac stuff

RocketChevy, I'll get pics of wings. As for the other windows, sorry I don't ship those

Thanks Randy

Boyd B · 04-23-2012, 09:55 PM

Thanks

04-13-2012, 06:45 PM	#26
Fattback Registered User Join Date: Sep 2010 Location: Oklahoma Posts: 287	Re: 72 chevy highlander with tilt getting parted I'm in Tulsa wouldn't mind meeting you to pick it up. How much you wanting for the outer? Thanks Rob Posted via Mobile Device

04-13-2012, 07:21 PM	#28
72GMCK-2500 Registered User Join Date: Feb 2011 Location: West Chester Pa. Posts: 195	Re: 72 chevy highlander with tilt getting parted Hey Randy hows the Floor mat? Thanks, Andrew. __________________ 1947 Chev 3600, 454,th350,9"ford tubbed (Pop's ride) 1965 GMC 1000 305E V6, Powerglide. GONE 1972 GMC K-2500 350, 4 speed, 229,000 miles 1988 Chevrolet Caprice 9C1 Ex cop car, 350, 700r4. 1997 Ford F-350 4x4 XLT (The Hauler) 7.3 diesel. RUST NEVER SLEEPS

04-13-2012, 07:26 PM	#29
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy highlander with tilt getting parted Rob, thats what I thought Graham57A, Andrew, I need to see if I have one thats decent Fattback, Rob, $100 for an outer Pete, I will watch for you Andrew, not sure yet, I will look tomorrow if not raining Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-13-2012, 08:30 PM	#30
Graham57a Senior Member Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,865	Re: 72 chevy highlander with tilt getting parted Okay, no hurry. The second one pictured on page 1 looks pretty clean, kinda hard to tell tho. Show quality is not necessary, just something that is decent. __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788

04-14-2012, 08:43 AM	#31
Fattback Registered User Join Date: Sep 2010 Location: Oklahoma Posts: 287	Re: 72 chevy highlander with tilt getting parted Randy sounds good on the price. Next couple weekends I am swamped. I will pm you and we can make arrangements to meet later this month. Thanks Rob

04-14-2012, 10:35 AM	#32
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy highlander with tilt getting parted Andrew, I will look later today Rob, sounds good. I know the 28th in the afternoon I'm busy but could meet in morning or that Sun. I've have a big swap meet in Lawrence Ks on the 4th and 5th, might be worth your time to meet me there either Fri afternoon or Sat morn, I'll have all the parts I have sat out there except real big stuff Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-14-2012, 12:21 PM	#33
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: 72 chevy highlander with tilt getting parted Randy, I'm interested in the rear end... What gear ratio is it? Also need a 68 sb engine harness if you have one. Mike Posted via Mobile Device

04-14-2012, 04:01 PM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy highlander with tilt getting parted MIke, I'll pull cover and see ratio. Sorry no good engine harnesses right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-14-2012, 08:37 PM	#35
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy highlander with tilt getting parted Grahams57A, here is the best one I have, it has one broken tab, see pic. I've seen guys glue these, $30 plus shipping Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-15-2012, 06:55 PM	#37
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy highlander with tilt getting parted cash3481, Mike, its a 3.08 open rear. Thanks let me know, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-15-2012, 07:16 PM	#38
larryd Registered User Join Date: Apr 2007 Location: quincy il Posts: 44	Re: 72 chevy highlander with tilt getting parted I need this Blazer drivers side taillight area. Also I need two good front inner fender wells. Thanks Attached Images

04-15-2012, 09:17 PM	#39
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy highlander with tilt getting parted Larry I will look at this one, not sure if its good or been bondo'd already. Sorry no good inner fenders. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-16-2012, 07:52 AM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy highlander with tilt getting parted pics for Doublebe's Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-16-2012, 10:34 AM	#41
doubleb's69 Registered User Join Date: Aug 2010 Location: Des Moines, IA Posts: 1,241	Re: 72 chevy highlander with tilt getting parted That was pretty quick Randy. How much shipped to 50313. Thanks. __________________ Bud

04-16-2012, 09:44 PM	#42
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: 72 chevy highlander with tilt getting parted Randy, Im looking for the aux spring bracket that the spring sets on by the rear axle and goes under the lower shock mount bracket. this is for a coil spring rear. I need both sides if you come across a pair. thanks



Register or Log In To remove these advertisements.

04-16-2012, 10:58 PM	#44
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy highlander with tilt getting parted Bud, info sent Terry, none right now but I will watch for you some Mike, yes 5 lug coil spring, it is yours. David, is buying the front end, you guys might make a trip together I need trucks to part out Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-22-2012, 11:42 PM	#45
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: 72 chevy highlander with tilt getting parted Randy, here's a bump for you! I'll figure out the trip w/ David or w/o him this week and get back with you. I can shoot for the end of the week maybe and grab his stuff if he's too busy. I should have grabbed it today on the way to the race. Mike Posted via Mobile Device

04-23-2012, 07:37 AM	#46
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy highlander with tilt getting parted Mike, How was the race? I haven't been down there for a few years. I'm going to try to get the rearend pulled and front pulled Tues after work so it will be ready. Just let me know, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-23-2012, 03:02 PM	#47
Boyd B Registered User Join Date: Mar 2012 Location: Molt, Montana Posts: 29	Re: 72 chevy highlander with tilt getting parted How's the cab? how much for the cab w/ dash and a/c and heater boxes and controls? __________________ 1953 3800 Chevy; 1960 Buick Electra; 1966 T-Bird 1970 w/ Cummins 4bt Ground up (in process). 2001 Chevy 3500 HD 8.1 Passes everything but a gas station; 2004 HD Road King; 1993 Jetcraft 5.7L 19' And a Woman who loves me!

04-23-2012, 06:13 PM	#48
RocketChevy56 Certified BFH Operator Join Date: Apr 2007 Location: Austin, Tx Posts: 154	Re: 72 chevy highlander with tilt getting parted Interested in the wing windows and door glass, and perhaps the back glass all pending shipping/condition etc. No variations between 69 Chevy to 72s that I know of, but please let me know if otherwise. Thanks!! Zip-78641 Posted via Mobile Device __________________ - 1969 swb C/10 fleetside -LSx swap and Resto in progress LQ4/TH400/Ed Curtis cam/Pro Flo intake/Brian Tooley Goodies ..... a couple snails may be trying to crawl into my engine bay... -1997 Z/28 - LT1/T-56 - Bolt ons, 9 inch, built trans/clutch and on the bottle

04-23-2012, 08:29 PM	#49
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy highlander with tilt getting parted Boyd, cab is bad, I replied on other thread about Ac stuff RocketChevy, I'll get pics of wings. As for the other windows, sorry I don't ship those Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-23-2012, 09:55 PM	#50
Boyd B Registered User Join Date: Mar 2012 Location: Molt, Montana Posts: 29	Re: 72 chevy highlander with tilt getting parted Thanks __________________ 1953 3800 Chevy; 1960 Buick Electra; 1966 T-Bird 1970 w/ Cummins 4bt Ground up (in process). 2001 Chevy 3500 HD 8.1 Passes everything but a gas station; 2004 HD Road King; 1993 Jetcraft 5.7L 19' And a Woman who loves me!

Register or Log In To remove these advertisements.