Softop installation no Holes

[turp mcspray]

I would buy one as well.

[robs71k5]

I'm still looking for a shop to do a bunch for me but so far not having much luck to get the price down and Im not really interested in doing all these by my self cause don't have the time and from my experience it doesn't really pay. I"ll keep looking for a bit anyway hopefully a small shop will step up. Also making a second piece for this mold so it can be sandwiched and left to cure without having to babysit it right up till it goes off. But again it's taking another week to build that part too. Should have it ready to go by end of month if I find the time.
Posted via Mobile Device

[ld271]

I'd buy one also.

[Big Block]

I'd be interested I one also.

[robs71k5]

Question for moderator

Not sure If I am breaking any rules here yet but should I be moving this thread to Blazer Jimmy stuff for sale when the parts become available.Some part nearly complete

[Big Block]

I would go down the list in order and pm people. If they don't want one go to the next. Just my opinion.

[Bigb401]

I am for sure 100% in. I'll pay. Just let me know when and where
Posted via Mobile Device

[OLD K5]

I would be interested in one.
Posted via Mobile Device

[turp mcspray]

Any luck finding someone to make these?

[Bigb401]

Ya I have been wondering about that too. Any new progress?
Posted via Mobile Device

[Bigb401]

Got any pics of ur creation?
Posted via Mobile Device

[robs71k5]

Sorry I was away on holidays
I had four parts come back from composite shop a week ago. I was not too inpressed with the results and my thinking is I cant sell these cause they dont match my idea of a saleable item. I'm now looking for another shop who can follow instruction more closely. Thes parts are complex in that they have multiple degrees of bends and twists that the cloth doesnt conform to. I dont like bubbles and the correct thickness is very important .I will keep this site up to date when I have something that will be presentable .Regards Rob

[JeffD72]

I would be on board to purchase one if you have any available or are planning to make any more.

[chrisvuc]

want one too!

[skorpioskorpio]

Realize this is a 6 month old thread but if these were ever made, I'm in for one.

[Effeckt]

I'm another that is interested and have been following the updates.
Posted via Mobile Device

[robs71k5]

Ok update is as I have been noticing the faults in design and had to go back and redo some flaws. So I now have that under control but still not having much luck with finding fiberglass shop to do them and might have to do them myself. However I do have another person coming to assess the production mode in the next week or so. So now I am at the point were driving down the hyway at 60 mph does not produce any wind penetrating the seal Which I find impressive.havent drivin much in the rain yet but the little I have has not proven any leaks
The next hurdle is having warm enough weather so they cure properly cause wife wont let me do them in garage cause of the stink in the house. At the end of the day the product has to pass my quality assurance which is what's killing my time and investment but I don't want to see my name bashed on this site either so the wait as far as I"m concerned is no real concern in that testament. Once everything is good to go it will produce one piece per day just can't quite give you the starting date yet. Hope that gives you some enough info .

Regards Rob
Posted via Mobile Device

[landy]

Excellent! I'm still interested.

[Ole Beater]

Me too.

[Effeckt]

I am as well.. Will stay tuned.
Posted via Mobile Device

[robs71k5]

Ok good news .... The adjustments to the mold worked out beautiful ...The other good news is I have a person to do a test piece for me to assess weather the product he puts out for me is good enough for you Also the price needs to be relatively in touch with my orig suggested price barring that I hope to start running parts as soon as he impresses the hell out of me .I was hoping the part could have been gel coated in the mold but its not working out quite that we'll .But who know maybe the new guy Will impress the hell out of me.regards Rob
Posted via Mobile Device

[1972K20]

Sounds good!
Posted via Mobile Device

[Bigb401]

Awsome, I'm still waiting patiently. Glad ur takin ur time and trying to make it a quality product!! Me and I'm sure alot of others will watching ur thread close for the news. Keep up the good work
Posted via Mobile Device

[niceguy678us]

I'm in for one. PM me when your in production.

[mtully79]

Been following the thread, can't wait to see if it meets your standards. I'm interested in one if you give it your seal of approval.